Hi there, I have runned into a problem after upgrading my OpenPLi image on my dreambox 800hd se V2 I have seen so many sites but they all talked about connecting with a null cable but it's rather unfortunate my box hasn't got a null port at the back . It was working fine before the update. Any help will be much appreciated, please help me out. Many thanks.
7 replies to this topic
Re: No CA found #2
-
- Senior Member
- 3,930 posts
+50
Good
Posted 28 August 2015 - 06:06
USB cable is what you needed than you can flash with dreammupp
Groetjes Cobus R
VU+ UNO 4K FBC DVB C LCD4linux met Samsung SPF 75H
XTREND ET10K 3x DVB C/T2 2 x sat (te koop €75)
MAXYTEC MULTIBOX
Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner
Re: No CA found #3
-
- PLi® Core member
- 50,110 posts
+549
Excellent
Posted 28 August 2015 - 06:44
There exist no official openpli images for the dream multimedia v2 boxes!
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: No CA found #4
-
- Forum Moderator
PLi® Core member - 22,833 posts
+211
Excellent
Posted 28 August 2015 - 07:41
And besides this you could well need some special applications due to the fact that you have a clone 800se.USB cable is what you needed than you can flash with dreammupp
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Dreamboxen heb ik niet meer. Verder nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET4000. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: No CA found #5
-
- Senior Member
- 1,031 posts
+14
Neutral
Posted 28 August 2015 - 08:59
As Frenske mentioned there is *No* official Openpli for V2 boxes.
-No CA error appears when the firmware and security SIM don't match. As a protection against clone hardware. Hence the remark by Frenske.
There are discrepancies:
Original Dreambox with Clone firmware image may produce same error.
Clone Dreambox with original firmware for sure produces this error
If you have a clone (and you know this!) please refer to your 'seller's web-site for support and please don't bother us here anymore. Discussion about clones is not done here..
Re: No CA found #6
-
- Member
- 4 posts
0
Neutral
Posted 28 August 2015 - 11:54
Thanks guys for your help, to start with the box is not clone, there's a mini usb port. I have tried installing dreamUp but because there's no com port it keeps aborting.
Re: No CA found #7
-
- Senior Member
- 1,031 posts
+14
Neutral
Posted 28 August 2015 - 12:02
If you have an original DM800-SE V2 it would not have loaded OpenPli in the first place! It would abort with 'Wrong Size". The DM800-SE V2 original runs on SSL #89.
IF you have an original box it would have been delivered with the Dream firmware... So, my question is: When the box starts (from power down! Not standby) which SSL is shown on the OLED display? Where did you buy the box and at what price? If under 200,- it is definitely a clone...
Re: No CA found #8
-
- Member
- 4 posts
0
Neutral
Posted 28 August 2015 - 14:10
Thanks guys I have managed to flashed the box. I do appreciate every single help u guys gave me, again Thanks
Also tagged with one or more of these keywords: Software update
XP1000 no longer booting after software update ?!Started by cptnkirk, 8 May 2017  XP1000, software update
|
|
|
||
mutant hd51 software update and plugin download problem (and more...)Started by keepitsimple, 17 Feb 2017 software update, plugin download and 1 more...
|
|
|
||
"No updates available" melding DM500HD na software updateStarted by moerman, 4 Feb 2014 Software update and 3 more...
|
|
|
||
Hoe kan ik een plugin uitsluiten van software updateStarted by maestro, 19 May 2013 plugin, software update, et4000
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
