Jump to content


Photo

No CA found

Software update

  • Please log in to reply
7 replies to this topic

#1 Mosho

  • Member
  • 4 posts

0
Neutral

Posted 28 August 2015 - 01:39

Hi there, I have runned into a problem after upgrading my OpenPLi image on my dreambox 800hd se V2 I have seen so many sites but they all talked about connecting with a null cable but it's rather unfortunate my box hasn't got a null port at the back . It was working fine before the update. Any help will be much appreciated, please help me out. Many thanks.



Re: No CA found #2 cobus

  • Senior Member
  • 4,774 posts

+69
Good

Posted 28 August 2015 - 06:06

USB cable is what you needed than you can flash with dreammupp

Groetjes Cobus R

 

VU+ UNO 4K SE FBC DVB-C (8x)

MUTANT HD66SE FBC DVB-C (3x)

MAXYTEC MULTIBOX COMBO

MUTANT HD60 DVB-S

 

 

Ziggo (digitaal) Kabel TV (FTV) op alle decoders met oa fallback tuner

 


Re: No CA found #3 littlesat

  • PLi® Core member
  • 57,058 posts

+698
Excellent

Posted 28 August 2015 - 06:44

There exist no official openpli images for the dream multimedia v2 boxes!

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: No CA found #4 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,486 posts

+397
Excellent

Posted 28 August 2015 - 07:41

USB cable is what you needed than you can flash with dreammupp

And besides this you could well need some special applications due to the fact that you have a clone 800se.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: No CA found #5 goldeneye

  • Senior Member
  • 1,030 posts

+14
Neutral

Posted 28 August 2015 - 08:59

As Frenske mentioned there is *No* official Openpli for V2 boxes.

 

-No CA error appears when the firmware and security SIM don't match. As a protection against clone hardware. Hence the remark by Frenske.

 

There are discrepancies:

 

Original Dreambox with Clone firmware image may produce same error.

Clone Dreambox with original firmware for sure produces this error

 

If you have a clone (and you know this!) please refer to your 'seller's web-site for support and please don't bother us here anymore. Discussion about clones is not done here..



Re: No CA found #6 Mosho

  • Member
  • 4 posts

0
Neutral

Posted 28 August 2015 - 11:54

Thanks guys for your help, to start with the box is not clone, there's a mini usb port. I have tried installing dreamUp but because there's no com port it keeps aborting.



Re: No CA found #7 goldeneye

  • Senior Member
  • 1,030 posts

+14
Neutral

Posted 28 August 2015 - 12:02

If you have an original DM800-SE V2 it would not have loaded OpenPli in the first place! It would abort with 'Wrong Size". The DM800-SE V2 original runs on SSL #89.

IF you have an original box it would have been delivered with the Dream firmware... So, my question is: When the box starts (from power down! Not standby) which SSL is shown on the OLED display? Where did you buy the box and at what price? If under 200,- it is definitely a clone...



Re: No CA found #8 Mosho

  • Member
  • 4 posts

0
Neutral

Posted 28 August 2015 - 14:10

Thanks guys I have managed to flashed the box. I do appreciate every single help u guys gave me, again Thanks





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users