68 replies to this topic

[Jan Gruuthuse]

I'm not aware of other trusted archive for downloads. You don't have some saved downloads yourself? Try your local satboard or see if you can build yourself?

[athoik]

Can you make à screenshots from menu, information, box? Als we offially do not support dmm boxes I''m suggesting to simply call it HDMI!!

 screen.jpg   34.98KB   3 downloads

I think HDMI is ok. Hopefully it won't break plugins that still depend on DVI.

Generally it seems that everything is DVI and when has_hdmi we just change it to HDMI when we create config.
 

...
        modes["DVI"] = ["720p", "1080p", "1080i", "576p", "480p", "576i", "480i"]
...

        def createConfig(self, *args):
                has_hdmi = HardwareInfo().has_hdmi()
                lst = []

                config.av.videomode = ConfigSubDict()
                config.av.videorate = ConfigSubDict()

                # create list of output ports
                portlist = self.getPortList()
                for port in portlist:
                        descr = port
                        if descr == 'DVI' and has_hdmi:
                                descr = 'HDMI'
                        elif descr == 'DVI-PC' and has_hdmi:
                                descr = 'HDMI-PC'
                        lst.append((port, descr))

Maybe has_hdmi is better to look on /proc/stb/hdmi folder?
 

root@dm800se:~# ls /proc/stb/hdmi/
avi_scan_info          avi_scan_info_choices  bypass_edid_checking   enable_hdmi_reset

root@formuler1:~# ls /proc/stb/hdmi/
preemphasis          preemphasis_choices

root@ixusszero:~# ls /proc/stb/hdmi/
audio_source          audio_source_choices  bypass_edid_checking  enable_hdmi_resets

Edited by athoik, 27 September 2015 - 14:46.

[Pedro_Newbie]

Maybe you'll have to check the setting of the scaler sharpness: Menu-> Setup -> System -> A/V Settings -> Scaler sharpness

[w0lf1977]

Maybe you'll have to check the setting of the scaler sharpness: Menu-> Setup -> System -> A/V Settings -> Scaler sharpness

All video settings within scaler sharpness are same.

[littlesat]

So for the dm800se it should indicate hdmi with our latesf changes....

[athoik]

So for the dm800se it should indicate hdmi with our latesf changes....

Sure, Video output is HDMI now, but why keeping DVI? Lets replace DVI with HDMI and we done.

Eg. OpenVIX, OpenATV already have done this change. (But add many if else to support correct every box exists out there)

Edited by athoik, 27 September 2015 - 15:42.

[littlesat]

i think its fine now and even better als for those dmm boxes it is still indicating dvi

[Erik Slagter]

I am fore.

[Tony il Capo]

I also had this problem on my Vu+ Duo2, it showed DVI instead of HDMI.

I only notice it this morning as I didn't update stb for a few days.

I even thought that was something wrong with my box, after the thunderstorms from yesterday... Then I saw this and updated the stb, it's fine now.

 

Thanks.