31 replies to this topic

[Marchella]

Your allmost ready.

You miss the dvb-usb-it9135-01.fw

 

I think it's then packages it913x and not 9135

opkg install firmware-dvb-usb-it913x

WTE I did everything as you said but stick to the menu is not determined ...

 

please do not kick me more tea in these cases ...

 

Spoiler

[H[Jroot@formuler3:~# [6n

dmesg

 

 

Memory: 313012K/524288K available (7357K kernel code, 364K rwdata, 1428K rodata, 240K init, 143K bss, 211276K reserved, 0K cma-reserved)

Hierarchical RCU implementation.

NR_IRQS:160

Measuring MIPS counter frequency...

Detected MIPS clock frequency: 751 MHz (375.765 MHz counter)

Console: colour dummy device 80x25

Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

Initializing cgroup subsys memory

SMP: Booting CPU1...

Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.

Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes

CPU1 revision is: 0002a065 (Broadcom BMIPS4380)

FPU revision is: 00130001

SMP: CPU1 is running

Brought up 2 CPUs

devtmpfs: initialized

NET: Registered protocol family 16

USB0: power enable is active high; overcurrent is active low

SCSI subsystem initialized

libata version 3.00 loaded.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Linux video capture interface: v2.00

Advanced Linux Sound Architecture Driver Initialized.

Bluetooth: Core ver 2.20

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

cfg80211: Calling CRDA to update world regulatory domain

Switched to clocksource wktmr

FS-Cache: Loaded

NET: Registered protocol family 2

TCP established hash table entries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP: reno registered

UDP hash table entries: 256 (order: 1, 8192 bytes)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

 

 

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

futex hash table entries: 512 (order: 3, 32768 bytes)

NFS: Registering the id_resolver key type

Key type id_resolver registered

Key type id_legacy registered

nfs4filelayout_init: NFSv4 File Layout Driver Registering...

fuse init (API version 7.23)

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

io scheduler noop registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A

serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A

serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A

loop: module loaded

ahci ahci.0: SSS flag set, parallel bus scan disabled

ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

ahci ahci.0: flags: ncq sntf stag clo slum part 

scsi host0: ahci

scsi host1: ahci

ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87

ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87

brcmstb_nand: NAND controller driver is loaded

libphy: Fixed MDIO Bus: probed

__clk_enable: network [1]

__clk_enable: enet [1]

bcm7552_pm_genet_enable 00

bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0

bcmgenet bcmgenet.0: failed to get enet-eee clock

libphy: bcmgenet MII bus: probed

bcmgenet bcmgenet.0: configuring instance for internal PHY

attached PHY at address 1

__clk_disable: enet [0]

bcm7552_pm_genet_disable 00

__clk_disable: network [0]

usbcore: registered new interface driver zd1201

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

__clk_enable: usb [1]

bcm7552_pm_usb_enable 00

ehci-brcm ehci-brcm.0: Broadcom STB EHCI

ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300

ehci-brcm ehci-brcm.0: USB 0.0 started,

 EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

ohci-brcm ohci-brcm.0: Broadcom STB OHCI

ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2

ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

usbcore: registered new interface driver usb-storage

mousedev: PS/2 mouse device common for all mice

i2c /dev entries driver

usbcore: registered new interface driver btusb

Driver 'mmcblk' needs updating - please use bus_type methods

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright© Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

sdhci-brcmstb sdhci-brcmstb.0: Enabling controller

sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found

sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found

mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA

hidraw: raw HID events driver © Jiri Kosina

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

TCP: cubic registered

NET: Registered protocol family 17

Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Bluetooth: HIDP socket layer initialized

Key type dns_resolver registered

PM: CP0 COUNT/COMPARE frequency does not depend on divisor

EBI CS0: setting up NAND flash (primary)

nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda

nand: AMD/Spansion S34ML02G1

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda

nand: AMD/Spansion S34ML02G1

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

Creating 3 MTD partitions on "brcmnand.0":

0x000000500000-0x000010000000 : "complete"

0x000000500000-0x000000b00000 : "kernel"

0x000000b00000-0x0000100

00000 : "rootfs"

ubi0: default fastmap pool size: 95

ubi0: default fastmap WL pool size: 25

ubi0: attaching mtd2

ata1: SATA link down (SStatus 0 SControl 300)

ubi0: attached by fastmap

ubi0: fastmap pool size: 95

ubi0: fastmap WL pool size: 25

ubi0: attached mtd2 (name "rootfs", size 245 MiB)

ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi0: good PEBs: 1956, bad PEBs: 4, corrupted PEBs: 0

ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 283739485

ubi0: available PEBs: 0, total reserved PEBs: 1956, PEBs reserved for bad PEB handling: 36

ALSA device list:

  No soundcards found.

Warning: unable to open an initial console.

ubi0: background thread "ubi_bgt0d" started, PID 62

ata2: SATA link down (SStatus 0 SControl 300)

UBIFS: background thread "ubifs_bgt0_0" started, PID 64

usb 2-1: new full-speed USB device number 2 using ohci-brcm

UBIFS: mounted UBI device 0, volume 0, name "rootfs"

UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS: FS size: 241635328 bytes (230 MiB, 1903 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

UBIFS: reserved for root: 0 bytes (0 KiB)

UBIFS: media format: w4/r0 (latest is w4/r0), UUID 848EBA87-0732-4A9F-BDEC-8E39E1B47CE3, small LPT model

VFS: Mounted root (ubifs filesystem) on device 0:13.

devtmpfs: mounted

Freeing unused kernel memory: 240K (808f4000 - 80930000)

usb 1-2: new high-speed USB device number 3 using ehci-brcm

hub 1-2:1.0: USB hub found

hub 1-2:1.0: 2 ports detected

random: nonblocking pool is initialized

usb 1-2.1: new high-speed USB device number 4 using ehci-brcm

usb-storage 1-2.1:1.0: USB Mass Storage device detected

scsi host2: usb-storage 1-2.1:1.0

usb 1-2.2: new high-speed USB device number 5 using ehci-brcm

usb 1-2.2: dvb_usb_af9035: prechip_versio

n=83 chip_version=01 chip_type=9135

usb 1-2.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state

usb 1-2.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-01.fw'

usb 1-2.2: dvb_usb_af9035: firmware version=12.54.14.0

usb 1-2.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in warm state

usb 1-2.2: dvb_usb_af9035: [0] overriding tuner from 00 to 38

usb 1-2.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

DVB: registering new adapter (ITE 9135(9005) Generic)

usbcore: registered new interface driver dvb_usb_af9035

usbcore: registered new interface driver tpm

scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    1100 PQ: 0 ANSI: 4

sd 2:0:0:0: Attached scsi generic sg0 type 0

sd 2:0:0:0: [sda] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)

sd 2:0:0:0: [sda] Write Protect is off

sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00

sd 2:0:0:0: [sda] No Caching mode page found

sd 2:0:0:0: [sda] Assuming drive cache: write through

 sda: sda1

sd 2:0:0:0: [sda] Attached SCSI removable disk

EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended

EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)

formuler3: module_layout: kernel tainted.

Disabling lock debugging due to kernel taint

i2c i2c-2: This adapter will soon drop class based instantiation of devices. Please make sure client 0x24 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.

Console: switching to colour frame buffer device 160x45

input: dreambox remote control (native) as /devices/virtual/input/input0

input: dreambox advanced remote control (native) as /devices/virtual/input/input1

DVB: registering new adapter (dvb0)

i2c i2c-1: This adapter will soon drop class based instantiation of devices. Please make sure client 0x08 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.

platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...

input: front

 panel as /devices/virtual/input/input2

Console: switching to colour dummy device 80x25

__clk_enable: network [1]

__clk_enable: enet [1]

bcm7552_pm_genet_enable 00

NET: Registered protocol family 10

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

bcmgenet bcmgenet.0 eth0: Link is Down

bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[Dimitrij]

Show answer:

lsmod

Edited by Dimitrij, 12 November 2015 - 15:33.

[Marchella]

Dimitrij

 

Spoiler

root@formuler3:~# [6n

lsmod

 

 

Module                  Size  Used by

ipv6                  378474  24 

af9033                 27132  0 

dvb_usb_af9035         17952  0 

dvb_usb_v2             14720  1 dvb_usb_af9035

formuler3            7699651  31 

formuler3_3            33009  1 formuler3

formuler3_2            22287  0 

formuler3_1             6541  3 formuler3_2,formuler3_3,formuler3

[Marchella]

Friends please take a look that is not so , well, is not determined by the stick , already head spin ...

 

Spoiler

[H[Jroot@formuler3:~# [6n

cat /proc/bus/nim_sockets

 

 

NIM Socket 0:

        Type: DVB-S2

        Name: BCM7346 (internal)

        Has_Outputs: no

        Internally_Connectable: 0

        Frontend_Device: 0

        I2C_Device: 1

root@formuler3:~# [6n

opkg list-installed | grep "kernel-module" | awk '{ print $1 }

 

'

 

 

kernel-module-af9033

kernel-module-ath

kernel-module-ath9k-common

kernel-module-ath9k-htc

kernel-module-ath9k-hw

kernel-module-carl9170

kernel-module-cdfs

kernel-module-dvb-usb-af9015

kernel-module-dvb-usb-af9035

kernel-module-dvb-usb-rtl28xxu

kernel-module-dvb-usb-v2

kernel-module-e4000

kernel-module-fc0013

kernel-module-formuler3-1

kernel-module-formuler3-2

kernel-module-formuler3-3

kernel-module-formuler3-4

kernel-module-ipv6

kernel-module-mac80211

kernel-module-mt2266

kernel-module-r8188eu

kernel-module-r820t

kernel-module-r8712u

kernel-module-r8723au

kernel-module-regmap-i2c

kernel-module-rt2500usb

kernel-module-rt2800lib

kernel-module-rt2800usb

kernel-module-rt2x00lib

kernel-module-rt2x00usb

kernel-module-rt73usb

kernel-module-rtl-usb

kernel-module-rtl2830

kernel-module-rtl2832

kernel-module-rtl8187

kernel-module-rtl8192c-common

kernel-module-rtl8192cu

kernel-module-rtlwifi

kernel-module-zd1211rw

root@formuler3:~# [6n

opkg list-installed | grep "firmware-dvb-" | awk '{ print $1 }

 

'

 

 

firmware-dvb-fe-af9013

firmware-dvb-usb-af9015

firmware-dvb-usb-af9035-02

firmware-dvb-usb-it9135

firmware-dvb-usb-it913x

root@formuler3:~# [6n

opkg install kernel-module-tuner-it913x

 

 

Unknown package 'kernel-module-tuner-it913x'.

 

Collected errors:

 

 * opkg_install_cmd: Cannot install package kernel-module-tuner-it913x.

[WTE]

All looks ok, driver is load and found.

I have no idea why it doesn't show the device in your nim list.

 

 

 

usb 1-2.2: dvb_usb_af9035: prechip_versio

n=83 chip_version=01 chip_type=9135

usb 1-2.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state

usb 1-2.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-01.fw'

usb 1-2.2: dvb_usb_af9035: firmware version=12.54.14.0

usb 1-2.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in warm state

usb 1-2.2: dvb_usb_af9035: [0] overriding tuner from 00 to 38

usb 1-2.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

DVB: registering new adapter (ITE 9135(9005) Generic)

usbcore: registered new interface driver dvb_usb_af9035

[Dimitrij]

 

All looks ok, driver is load and found.

I have no idea why it doesn't show the device in your nim list.

 

 

Maybe need power hub...

[Marchella]

WTE, Dimitrij More noted such bac on Formuler3 has two usb quick-disconnect couplings and so if they inserted stick and flash card after a full reboot , boxing is not loaded in the Boot label displays  and if pull with quick-disconnect couplings flash drive loaded the box but stick never determined 

Edited by marshella, 13 November 2015 - 02:13.

[Marchella]

is not it possible that the children no longer than help with dvb-t Stick ....

 

there is still available dvb-t2 T230, may be able to make it on my formuler3, please help ....

 

 2.JPG   221.73KB   1 downloads

Edited by marshella, 17 November 2015 - 14:02.

[Marchella]

 

All looks ok, driver is load and found.

I have no idea why it doesn't show the device in your nim list.

 

I think all this is the case , but how to solve I have no idea ....

i2c i2c-2: This adapter will soon drop class based instantiation of devices. Please make sure client 0x24 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details

[Pr2]

Hi atoik,

 

I am reading this thread and try to install the packages you recommend before but for me the package:

 

opkg install kernel-module-regmap-i2c

 

is not available for my Xtrend ET-9000 and I think that the T-230 needs i2c. I didn't succeed yet to make it working on my ET-9000.

 

Pr2

[athoik]

Hi,

Dmesg always contains more information.

Always make sure that stick are working, first test them under windows pc.

[Marchella]

the image ATV_5.1 dvb-t stick determined without problems ...

 screenshot_2015-11-29_20-53-12.jpg   64.01KB   0 downloads

[H[Jroot@formuler3:~# 
cat /proc/bus/nim_sockets




NIM Socket 0:
        Type: DVB-S2
        Name: BCM7346 (internal)
        Has_Outputs: no
        Internally_Connectable: 0
        Frontend_Device: 0
        I2C_Device: 1
NIM Socket 1:
        Type: DVB-T
        Name: ITE Technologies, Inc.
        Has_Outputs: no
        Internally_Connectable: 0
        Frontend_Device: 1
        I2C_Device: -1
===============================================================
root@formuler3:~# 
lsmod




Module                  Size  Used by
ftdi_sio               31500  0
cdc_acm                18922  0
pl2303                  8616  0
usbserial              24621  2 pl2303,ftdi_sio
ppp_async               9618  0
ppp_generic            26696  1 ppp_async
slhc                    5819  1 ppp_generic
ipv6                  379242  43
it913x                  4041  1
regmap_i2c              2559  1 it913x
af9033                 27148  1
dvb_usb_af9035         17984  2
dvb_usb_v2             14736  1 dvb_usb_af9035
xfs                   691598  0
libcrc32c                714  1 xfs
formuler3            7699651  27
formuler3_3            33009  1 formuler3
formuler3_2            22287  0
formuler3_1             6541  3 formuler3_2,formuler3_3,formuler3
ext2                   57687  0
root@formuler3:~#

 

Edited by marshella, 29 November 2015 - 16:54.