Outgoing? Yes, any box that can transcode.
Or do you want to transcode in incoming IPTV stream? Then the answer is no, it is an STB, not a broadcast station.
Posted 8 July 2017 - 16:40
Outgoing? Yes, any box that can transcode.
Or do you want to transcode in incoming IPTV stream? Then the answer is no, it is an STB, not a broadcast station.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 November 2017 - 15:05
hi, everybody in this great forum
i have a vu+ solo 4k and im reading all this post about tbs5925
i have some questions... may some can help...
im interest in buy a tbs5925 for get multistream channels at 4.8e, 12.5w and specially 30w (because i live in canary islands) and also for makes satellite blindscan for sr low channels
my question its that vu solo 4k finally support tbs5925 with openpli and i can watch multistream channels with tbs5925
thank you soo much for your time
Edited by lordgothic, 7 November 2017 - 15:10.
Posted 29 April 2018 - 12:56
Hi everybody , I bought VU uno4k SE with OPENPLI , works OK , but .... Before i use VU solo2 , there was two video output signal , HDMI with parameters set in menu ( i used 1080p , this signal was connected to my main TV ) , and second video output SCART ( there still was signal 561i independent of menu settings , and i connected this signal to analog RF TV modulator , and transmit in my home network to the others TVs ) Now in VU uno 4k SE is only one video output as HDMI , this output works ok , i used 2160p to main TV , but i have not other output to the rest of TVs . How to split video signal to use one output to main TV , and second output to other TVs , i tried use of HDMI splitter , but device as tested not works with signal 2160p@60Hz , also i don't need 4k signal on both outputs . Also when main TV is off ( sony android TV ) this TV sometimes wake up , for a seconds , and this cause video signal lost for 1-2 seconds on second HDMI output . I have idea connect USB Video adapter ( USB3.0 to HDMI , the better was USB3.0 to SCART , but doesn't exist ) set output resolution to 720p ( this is enought for other TVs ) , but this need driver to second one video card , and create settings to clone video output from main HDMI to second HDMI , is that chance to work , which type of USB to HDMI adapter will be support by OPENPLI software .
Posted 29 April 2018 - 17:25
Hi,
USB3 for Video output will not work because of missing driver. HDMI splitter with downscaling is not a simple splitter anymore it is a scaler and more or less expensive. I would say buy a simple Android streaming box and stream you video transcoded through ethernet.
ciao
Posted 10 May 2018 - 19:13
I can buy cheap USB 3.0 Video output adapter ,this adapter has a linux ( ubuntu ) driver ( https://github.com/FrescoLogic/FL2000 ) , but this is driver for PC architecture , is it possible to compile this driver for VU uno4k SE architecture ?
I'm not programers , only power electronics specialist .
0 members, 2 guests, 0 anonymous users