159 replies to this topic

[mx3L]

Dm500 hd officialy support progressive output 50/60 hz at 480,576,720 and only at 1080 is 24 hz.As i said again i never had broblems watching the same video files using image with gst 0.10.

Detection if video is progressive or interlaced is done in drivers, it's not related to gstreamer version. I have tested your sample and on et4x00 with gst1.0 and video is detected by drivers as progressive.

So It looks to me that you're using different drivers in your gst 0.10 image.

[Erik Slagter]

I think there are multiple issues here. If you're not using something like autoresolution, the receiver (drivers) will not switch the output to any resolution, be it progressive or interlaced, it will just convert to whatever resolution you configured in the video settings. And that counts for either DVB or media.

[luis67]

 

Dm500 hd officialy support progressive output 50/60 hz at 480,576,720 and only at 1080 is 24 hz.As i said again i never had broblems watching the same video files using image with gst 0.10.

Detection if video is progressive or interlaced is done in drivers, it's not related to gstreamer version. I have tested your sample and on et4x00 with gst1.0 and video is detected by drivers as progressive.

So It looks to me that you're using different drivers in your gst 0.10 image.

 

I am using satdreamgr image based on openpli

[athoik]

Dm500 hd officialy support progressive output 50/60 hz at 480,576,720 and only at 1080 is 24 hz.As i said again i never had broblems watching the same video files using image with gst 0.10.

Detection if video is progressive or interlaced is done in drivers, it's not related to gstreamer version. I have tested your sample and on et4x00 with gst1.0 and video is detected by drivers as progressive.
So It looks to me that you're using different drivers in your gst 0.10 image.

I am using satdreamgr image based on openpli

SatdreamGr uses the same drivers no matter what GStreamer you are using.

[mx3L]

According to AutoResolution source, https://github.com/O.../plugin.py#L183 is interlaced mode set, even if it was not set in servicemp3 yet (m_progressive == -1).

So it's possible that evVideoProgressiveChanged event is for some reason not emitted and AutoResolution then assumes interlaced mode.

 

Can you provide enigma2 output when playing Sample.mkv with AutoResolution enabled, so we can see if evVideoProgressiveChanged was catched by AutoResolution?

[athoik]

We need an extra debug in autoresolution plugin. It seems we are getting framerate -1.
 

def determineContent(self):
print "[AutoRes] determineContent"
self.timer.stop()
self.after_switch_delay = True
if usable:
service = self.session.nav.getCurrentService()
info = service and service.info()
height = info and info.getInfo(iServiceInformation.sVideoHeight)
width = info and info.getInfo(iServiceInformation.sVideoWidth)
framerate = info and info.getInfo(iServiceInformation.sFrameRate)
+ print "[AutoRes] height %s width %s framerate %s" % (str(height), str(width), str(framerate))
if height != -1 and width != -1 and framerate != -1:

[AutoRes] height 576 width 720 framerate -1

<132123.322378> [eServiceMP3] playbin uri=file:///media/usb/movie/Sample_progressive.mkv
<132123.324906> [eServiceMP3] starting pipeline
resolved to PLAY
<132123.401689> [eServiceMP3] state transition NULL -> READY
<132123.507973> [eDVBDB] getBouquet failed.. no path given!
<132123.518536> [eDVBDB] getBouquet failed.. no path given!
new service started! trying to download cuts!
resolved to PLAY
[AutoRes] service changed
[__evUpdatedInfo] title 0 of 0 (Within_The_Rock.Title1)
[__evUpdatedInfo] title 0 of 0 (Within_The_Rock.Title1)
<132123.635611> [eServiceMP3] toc_type edition
<132123.636552> [eServiceMP3] loading cuesheet
<132123.636868> [eServiceMP3] TOC entry from source dvbvideosink1 processed
<132123.644803> [eServiceMP3] TOC entry from source dvbaudiosink1 not used
<132123.645237> [eServiceMP3] state transition READY -> PAUSED
<132123.648467> [eServiceMP3] async-done - 1 video, 1 audio, 0 subtitle
<132123.652937> [eServiceMP3] AUDIO STRUCT=audio/x-ac3
<132123.653425> [eServiceMP3] audio stream=0 codec=AC-3 audio language=en
[__evUpdatedInfo] title 0 of 0 (Within_The_Rock.Title1)
<132123.702132> [eServiceMP3] state transition PAUSED -> PLAYING
[AutoRes] got event evVideoSizeChanged
<132124.319881> [eConsoleAppContainer] Starting /usr/bin/grab
[AutoRes] determineContent
[AutoRes] height 576 width 720 framerate -1
<132125.312194> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 50(16)

Edited by athoik, 1 December 2015 - 21:35.

[mx3L]

@athoik

on et4x00:

[AutoRes] service changed
[__evUpdatedInfo] title 0 of 0 (Within_The_Rock.Title1)
[__evUpdatedInfo] title 0 of 0 (Within_The_Rock.Title1)
<178969.810270> [eServiceMP3] toc_type edition
<178969.816908> [eServiceMP3] loading cuesheet
<178969.821843> [eServiceMP3] TOC entry from source dvbvideosink6 processed
<178969.826541> [eServiceMP3] state transition READY -> PAUSED
<178969.861976> [eServiceMP3] async-done - 1 video, 1 audio, 0 subtitle
<178969.866554> [eServiceMP3] AUDIO STRUCT=audio/x-ac3
<178969.883145> [eServiceMP3] audio stream=0 codec=AC-3 audio language=en
[__evUpdatedInfo] title 0 of 0 (Within_The_Rock.Title1)
[AutoRes] got event evFramerateChanged
[AutoRes] got event evVideoSizeChanged
[AutoRes] got event evVideoProgressiveChanged
<178970.532265> [eServiceMP3] state transition PAUSED -> PLAYING
[AutoRes] determineContent
[AutoRes] switch deinterlacer mode to auto
[AutoRes] new content is 720x576p25
[AutoRes] determined videomode 720p

So you're missing:

[AutoRes] got event evFramerateChanged
[AutoRes] got event evVideoProgressiveChanged

[athoik]

I am using satdreamgr image based on openpli

Can you please perform an online update and tell us if problem gone?

[luis67]

I am using satdreamgr image based on openpli

Can you please perform an online update and tell us if problem gone?

After online update problem gone,big thanks.

[Purè90]

another problem which i sort it out coz of missing softcam-support , u will not be able to install cams coz the one from feed is miss match , so only way to install is manually

Hi, I had the same problem. I have  a DM 800 HD, I tried to install cam from the Plugin and Green button but I received an installation error and the cam was not installed.

I tried doing it manually using FTP command but I obtained the same result. I used a .ipk file (cccam 2.30) specific for OPENPLI image. The same unsuccessful result for CCcam info Plugin.

Please can you help me. Many thanks in advance.

Bye

[MastaG]

Yes I know.

The feed is broken.

Also the latest fixes for hls video's are not part of these images.

I'll create new images and a working feed later. :-)

[Purè90]

Many thanks. I'll wait for your next good job.

Bye

[Andi316]

Is it possible to add a feed for the new Solo 4k?

[cenko]

Yes I know.

The feed is broken.

Also the latest fixes for hls video's are not part of these images.

I'll create new images and a working feed later. :-

Thanks. Will it be online update?

[Erik Slagter]

Is it possible to add a feed for the new Solo 4k?

Then at least there should be a BSP...

[MastaG]

soon :-)

I hope before the end of the week.

 

Regarding the Solo 4k, I believe there is a BSP in oe-alliance with support for their 4k models.

https://github.com/o...nds/meta-vuplus

 

However I think I'll be ironing out many imcompatibilities if I have to merge this into openpli-oe-core.

oe-alliance-core uses a much more recent snapshot of openembedded.

 

Also I don't own a 4k vu+ receiver

So I may do it in the future if time allows me to.

 

Or just use a distro that uses oe-alliance, like openatv for example.

[sportfootbol]

Will it be fix GST 1.7.0 problem the update for DM 800 HD SE...(https mp4)...Thanks...

[athoik]

Someone should find the commit that intoduces the error. Last time it was beeker that did the hard job.

[MastaG]

I don't know.

 

But there have been MANY improvements since my last image.

Particular for HLS (m3u8) and other fragmented streams.

 

Thanks to the gstreamer devs and the fellas here for making it possible (especially athoik, mx3L and christophecvr).

 

My private images play almost anything now :-)

[MastaG]

sportfootbal: what issues are you facing then?

can you post a stream?