1177 replies to this topic

[christophecvr]

Astra-sm master next.

 

Here a patch which solves the problem of build astra-sm in master-next.

 

First the compile patch that is just needed for master-next.

 

I unfortunately also needed to add whitout ffmpeg. Since there is a very severe error into building astra-sm with ffmpeg support. It will try to check up on availability off ffmpeg package on the main build system which is totally wrong. And only may and does lead to poisoning of the final (target cross compiled package). The person who added this package should review the whole bitbake file and consult the the package cross compile build manual for this package and or correct some severe errors into build configs of this package.

 

 

Attached Files

•  Astra-sm-master-next.patch   2.33KB   15 downloads

[athoik]

I use newer srcrev of astra-sm : https://gitlab.com/b...29bb5466e00bcfc

No need for extra patches and astra-sm new great features in....

Will update bitbake the next days.

Edited by athoik, 30 October 2016 - 21:56.

[christophecvr]

Concerning the Makefile, I have here a patch which will not hard target the branch but look up the branch You cloned.

 

This means if You're working with the actif (master branch) then update will always be against the master branch.

If You're work with another branch it will update against that other branch.

 

This patch can then be set for all branches. inclusive the master branch.

 

 

Attached Files

•  pli-git-branch-used-makefile.patch   1.21KB   12 downloads

[christophecvr]

I here just changed the previous patch and used the way to issue a shell git command like they did for the rest. This to remain in same way as file was made initially.

 

Attached Files

•  pli-git-branch-used-makefile.patch   1.27KB   16 downloads

[christophecvr]

@Taapat

 

Master-next build failure but it's due to the blu-ray plugin :

ERROR: enigma2-plugin-extensions-blurayplayer-1+gitAUTOINC+e8612bf77a-r0 do_compile: python setup.py build execution failed.
ERROR: enigma2-plugin-extensions-blurayplayer-1+gitAUTOINC+e8612bf77a-r0 do_compile: Function failed: do_compile (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-blurayplayer/1+gitAUTOINC+e8612bf77a-r0/temp/log.do_compile.7734)
ERROR: Logfile of failure stored in: /home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-blurayplayer/1+gitAUTOINC+e8612bf77a-r0/temp/log.do_compile.7734
Log data follows:
| DEBUG: Executing shell function do_compile
| ERROR: python setup.py build execution failed.
| running build
| running build_py
| creating build
| creating build/lib.linux-x86_64-2.7
| creating build/lib.linux-x86_64-2.7/Extensions
| creating build/lib.linux-x86_64-2.7/Extensions/BlurayPlayer
| copying src/plugin.py -> build/lib.linux-x86_64-2.7/Extensions/BlurayPlayer
| copying src/BlurayUi.py -> build/lib.linux-x86_64-2.7/Extensions/BlurayPlayer
| copying src/__init__.py -> build/lib.linux-x86_64-2.7/Extensions/BlurayPlayer
| copying src/BlurayAudioSelection.py -> build/lib.linux-x86_64-2.7/Extensions/BlurayPlayer
| copying src/icon.png -> build/lib.linux-x86_64-2.7/Extensions/BlurayPlayer
| running build_ext
| building 'Extensions.BlurayPlayer.blurayinfo' extension
| creating build/temp.linux-x86_64-2.7
| creating build/temp.linux-x86_64-2.7/src
| mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2 -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-blurayplayer/1+gitAUTOINC+e8612bf77a-r0=/usr/src/debug/enigma2-plugin-extensions-blurayplayer/1+gitAUTOINC+e8612bf77a-r0 -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -fPIC -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include/python2.7 -c src/blurayinfo.c -o build/temp.linux-x86_64-2.7/src/blurayinfo.o
| src/blurayinfo.c: In function 'storeInfo':
| src/blurayinfo.c:94:52: error: 'BLURAY_CLIP_INFO {aka struct bd_clip}' has no member named 'clip_id'
|    clip = _mk_path(tList[pos].clip_id, ti->clips[ii].clip_id);
|                                                     ^
| error: command 'mipsel-oe-linux-gcc' failed with exit status 1
| ERROR: Function failed: do_compile (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/enigma2-plugin-extensions-blurayplayer/1+gitAUTOINC+e8612bf77a-r0/temp/log.do_compile.7734)
ERROR: Task /home/christophe/openpli50/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-blurayplayer.bb:do_compile (/home/christophe/openpli50/openpli-oe-core/meta-openpli/recipes-openpli/enigma2-plugins/enigma2-plugin-extensions-blurayplayer.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4809 tasks of which 4781 didn't need to be rerun and 1 failed.

Summary: 1 task failed:

[christophecvr]

@Taapat

 

solved by using the libbluray.git out off pli master (inclusif the extra files)

 

Can the current master be merged with master-next ?

Thank's

[WanWizard]

Have to ask Littlesat, there's an important revert to do before tonights build, which needs to be merged into master-next as well.

[littlesat]

I would prefer someone else cherry picks/mergesthe master into mater-next regarding openpli5.... Or offer a proper merge request. I cannot test/build this evening... Or at least if someone can confirm a git merge master is simply suffiicant...

Edited by littlesat, 31 October 2016 - 17:56.

[christophecvr]

Well I do not know about merge stuff and so, but ... it has been done many times .

 

What I well suggest is first applying the patch mentioned on (it is a very very severe issue for other branches then master if persons are using make update when using other branch then master) :

 

http://forums.openpl...ndpost&p=608239

 

to master branch.

 

Then merge the master branch to master-next

Also merge the enigma2 master to next-master (there it is called next-master) as there is also a very very severe issue concerning service selection see :

http://forums.openpl...ndpost&p=608227

 

its confirmed problem there for all stb's.

 

These are very very important issues actually real blockers, .... and so very urgent.

[Taapat]

@christophecvr if you want to be fixed error in my plugin building I can create a pull request for libbluray in master-next.

But maybe is better a little wait for master merge in the master-next?

[christophecvr]

 

@christophecvr if you want to be fixed error in my plugin building I can create a pull request for libbluray in master-next.

But maybe is better a little wait for master merge in the master-next?

 

no no it's better to wait on merge.

 

Unfortunately we are facing (again) very severe red alerts which means no build and or severe unstable builds due to persons who are able to (push and update) do not follow up or push what is required on time.

[ostende]

wat's wrong with the kernel link 

 

i try to build new but i got this error 

 

i try to put the file on source but i get also an error 

 

 

ERROR: linux-vusolo2-3.13.5-r2.6.4 do_fetch: Fetcher failure: Fetch command export DBUS_SESSION_BUS_ADDRESS="unix:abstract=/tmp/dbus-h7RfXqNgx0"; export SSH_AUTH_SOCK="/run/user/1000/keyring/ssh"; export PATH="/home/redouan/openpli/openpli-oe-core/openembedded-core/scripts:/home/redouan/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin/mipsel-oe-linux:/home/redouan/openpli/openpli-oe-core/build/tmp/sysroots/vusolo2/usr/bin/crossscripts:/home/redouan/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/sbin:/home/redouan/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin:/home/redouan/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/sbin:/home/redouan/openpli/openpli-oe-core/build/tmp/sysroots/x86_64-linux/bin:/home/redouan/openpli/openpli-oe-core/openembedded-core/scripts:/home/redouan/openpli/openpli-oe-core/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"; export HOME="/home/redouan"; /usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate -P /home/redouan/openpli/openpli-oe-core/sources 'http://archive.vuplu...-3.13.5.tar.bz2' --progress=dot -v failed with exit code 4, output:

--2016-11-02 12:24:11--  http://archive.vuplu...-3.13.5.tar.bz2

Resolving archive.vuplus.com (archive.vuplus.com)... 50.62.36.1

Connecting to archive.vuplus.com (archive.vuplus.com)|50.62.36.1|:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 94621523 (90M) [application/x-bzip2]

Saving to: ‘/home/redouan/openpli/openpli-oe-core/sources/stblinux-3.13.5.tar.bz2’

 

     0K .......... .......... .......... .......... ..........  0%  160K 9m38s

    50K .......... .......... .......... .......... ..........  0% 21.2K 41m7s

   100K .......... .......... .......... .......... ..........  0%  163K 30m32s

   150K .......... .......... .......... .......... ..........  0%  110M 22m54s

   200K .......... .......... .......... .......... ..........  0% 21.8K 32m23s

   250K .......... .......... .......... .......... ..........  0% 29.0K 35m47s

   300K .......... .......... .......... .......... ..........  0% 41.0K 36m0s

   350K .......... .......... .......... .......... ..........  0% 24.5K 39m19s

   400K .......... .......... .......... .......... ..........  0% 19.6K 43m38s

   450K .......... .......... .......... .......... ..........  0% 30.1K 44m20s

   500K .......... .......... .......... .......... ..........  0% 22.5K 46m28s

   550K .......... .......... .......... .......... ..........  0% 20.7K 48m44s

   600K .......... .......... .......... .......... ..........  0% 34.0K 48m25s

   650K .......... .......... .......... .......... ..........  0% 46.0K 47m19s

   700K .......... .......... .......... .......... ..........  0% 26.8K 47m56s

   750K .......... .......... .......... .......... ..........  0% 18.6K 50m2s

   800K .......... .......... .......... .......... ..........  0% 29.2K 50m8s

   850K .......... .......... .......... .......... ..........  0% 24.2K 50m50s

   900K .......... .......... .......... .......... ..........  1% 21.1K 51m56s

   950K .......... .......... .......... .......... ..........  1% 26.9K 52m9s

  1000K .......... .......... .......... .......... ..........  1% 26.6K 52m21s

  1050K .......... .......... .......... .......... ..........  1% 36.3K 51m51s

  1100K .......... .......... .......... .......... ..........  1% 44.7K 51m3s

  1150K .......... .......... .......... .......... ..........  1% 15.5K 52m59s

  1200K .......... .......... .......... .......... ..........  1% 30.1K 52m51s

  1250K .......... .......... .......... .......... ..........  1% 42.9K 52m9s

  1300K .......... .......... .......... .......... ..........  1% 38.8K 51m38s

  1350K .......... .......... .......... .......... ..........  1% 33.4K 51m23s

  1400K .......... .......... .......... .......... ..........  1% 35.8K 51m3s

  1450K .......... .......... .......... .......... ..........  1% 48.0K 50m22s

  1500K .......... .......... .......... .......... ..........  1% 41.0K 49m55s

  1550K .......... .......... .......... .......... ..........  1% 19.8K 50m43s

  1600K .......... .......... .......... .......... ..........  1% 29.0K 50m44s

  1650K .......... .......... .......... .......... ..........  1% 18.9K 51m34s

  1700K .......... .......... .......... .......... ..........  1% 26.3K 51m42s

  1750K .......... .......... .......... .......... ..........  1% 32.0K 51m33s

  1800K .......... .......... .......... .......... ..........  2% 22.5K 51m56s

  1850K .......... .......... .......... .......... ..........  2% 36.6K 51m37s

  1900K .......... .......... .......... .......... ..........  2% 40.9K 51m13s

  1950K .......... .......... .......... .......... ..........  2% 35.6K 50m58s

  2000K .......... .......... .......... .......... ..........  2% 22.8K 51m19s

  2050K .......... .......... .......... .......... ..........  2% 36.7K 51m2s

  2100K .......... .......... .......... .......... ..........  2% 36.4K 50m47s

  2150K ........                                                2% 12.5K=73s

 

2016-11-02 12:25:25 (29.5 KB/s) - Connection closed at byte 2210112. Retrying.

 

--2016-11-02 12:25:26--  (try: 2)  http://archive.vuplu...-3.13.5.tar.bz2

Connecting to archive.vuplus.com (archive.vuplus.com)|50.62.36.1|:80... connected.

HTTP request sent, awaiting response... 206 Partial Content

Length: 94621523 (90M), 92411411 (88M) remaining [application/x-bzip2]

Saving to: ‘/home/redouan/openpli/openpli-oe-core/sources/stblinux-3.13.5.tar.bz2’

 

        [ skipping 2150K ]

  2150K ,,,,,,,,.. .......... .......... .......... ..........  2% 39.9K 45m10s

  2200K .......... .......... .......... .......... ..........  2% 58.3K 34m34s

  2250K .......... .......... .......... .......... ..........  2% 53.7K 32m14s

  2300K .......... .......... .......... .......... ..........  2% 28.1K 37m44s

  2350K .......... .......... .......... .......... ..........  2% 24.3K 42m42s

  2400K .......... .......... .......... .......... ..........  2% 34.0K 42m55s

  2450K .......... .......... .......... .......... ..........  2% 44.5K 41m33s

  2500K .......... .......... .......... .......... ..........  2% 20.0K 45m47s

  2550K .......... .......... .......... .......... ..........  2% 21.3K 48m31s

  2600K .......... .......... .......... .......... ..........  2% 31.9K 48m20s

  2650K .......... .......... .......... .......... ..........  2% 40.5K 47m15s

  2700K .......... .......... .......... .......... ..........  2% 50.6K 45m44s

  2750K .......... .......... .......... .......... ..........  3% 29.4K 46m6s

  2800K .......... .......... .......... .......... ..........  3% 44.1K 45m11s

  2850K .......... .......... .......... .......... ..........  3% 56.5K 43m54s

  2900K .......... .......... .......... .......... ..........  3% 26.4K 44m40s

  2950K .......... .......... .......... .......... ..........  3% 35.0K 44m31s

  3000K .......... .......... .......... .......... ..........  3% 19.3K 46m20s

  3050K .......... .......... .......... .......... ..........  3% 26.1K 46m52s

  3100K .......... .......... .......... .......... ..........  3% 22.3K 47m51s

  3150K .......... .......... .......... .......... ..........  3% 33.8K 47m38s

  3200K .......... .......... .......... .......... ..........  3% 40.5K 47m7s

  3250K .......... .......... .......... .......... ..........  3% 27.9K 47m21s

  3300K .......... .......... .......... .......... ..........  3% 32.7K 47m15s

  3350K .......... .......... .......... .......... ..........  3% 54.0K 46m25s

  3400K .......... .......... .......... .......... ..........  3% 31.6K 46m25s

  3450K .......... .......... .......... .......... ..........  3% 32.8K 46m21s

  3500K .......... .......... .......... .......... ..........  3% 21.8K 47m6s

  3550K .......... .......... .......... .......... ..........  3% 29.3K 47m11s

  3600K .......... .......... .......... .......... ..........  3% 36.0K 46m57s

  3650K .......... .......... .......... .......... ..........  4% 44.6K 46m29s

  3700K .......... .......... .......... .......... ..........  4% 58.1K 45m48s

  3750K .......... .......... .......... .......... ..........  4% 40.5K 45m29s

  3800K .......... .......... .......... .......... ..........  4% 23.6K 45m58s

  3850K .......... .......... .......... .......... ..........  4% 13.5K 47m46s

  3900K .......... .......... .......... .......... ..........  4% 27.3K 47m55s

  3950K .......... .......... .......... .......... ..........  4% 16.2K 49m3s

  4000K .......... .......... .......... .......... ..........  4% 40.5K 48m42s

  4050K .......... .......... .......... .......... ..........  4% 32.4K 48m35s

  4100K .......... .......... .......... .......... ..........  4% 14.8K 49m50s

  4150K .......... .......... .......... .......... ..........  4% 18.9K 50m29s

  4200K .......... .......... .......... .......... ..........  4% 32.5K 50m20s

  4250K .......... .......... .......... .......... ..........  4% 34.9K 50m7s

  4300K .                                                       4% 2092G=73s

 

2016-11-02 12:26:40 (29.3 KB/s) - Connection closed at byte 4404323. Giving up.

 

 

ERROR: linux-vusolo2-3.13.5-r2.6.4 do_fetch: Function failed: Fetcher failure for URL: 'http://archive.vuplu...-3.13.5.tar.bz2'. Unable to fetch URL from any source.

ERROR: Logfile of failure stored in: /home/redouan/openpli/openpli-oe-core/build/tmp/work/vusolo2-oe-linux/linux-vusolo2/3.13.5-r2.6.4/temp/log.do_fetch.21468

ERROR: Task /home/redouan/openpli/openpli-oe-core/meta-vuplus/recipes-bsp/linux/linux-vusolo2_3.13.5.bb:do_fetch (/home/redouan/openpli/openpli-oe-core/meta-vuplus/recipes-bsp/linux/linux-vusolo2_3.13.5.bb:do_fetch) failed with exit code '1'

 

[Erik Slagter]

What's wrong is that VU+ it's web servers drops the connection after 4300 Kbytes. It's not the first time that this is happening.

[dax]

What happens?

Build Configuration:
BB_VERSION        = "1.32.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "ArchLinux"
TARGET_SYS        = "mipsel-oe-linux"
MACHINE           = "vusolo2"
DISTRO            = "openpli"
DISTRO_VERSION    = "5"
TUNE_FEATURES     = "o32 fpu-hard mips32"
TARGET_FPU        = ""
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       = "HEAD:7a491f384c277ee42ac895fec6fc2ef70f15df4d"
meta              = "HEAD:2a59d0fa7bda78927435603e3049ce373cf6a198"
meta-openpli      
meta-dream        = "master-next:0bb837464479ce11daa146f2e744e49f877db741"
meta-vuplus       = "HEAD:8c1ad6d94b62ca45096a746d0cef0c523a977b0c"
meta-xsarius      = "HEAD:fd1d22a114074aac38aeb4e6f3bfb3053d468a66"
meta-xp           = "HEAD:3b0534aeeb8108d029d3db2cffbcf92d3079bcc2"
meta-xtrend       = "HEAD:4dc1373ccbf7a5d0c789ee3d85e0ac0018bb7f7f"
meta-formuler     = "HEAD:9ba268f8142b2ac3619787f848f4bb322ec22ddf"
meta-hd           = "HEAD:f0cc3625f35c67b9b77f2249639aa25ca82f46f2"
meta-xpeedc       = "HEAD:5dd87db177f8f67725ef6cb220123ca9aee927a6"
meta-wetek        = "HEAD:5868788e42986be336d0e6a5f7b47f741df102bb"
meta-zgemma       = "HEAD:8e3da52e517a8accf27d8869d1fb379f4a8a7b26"
meta-edision      = "HEAD:776934070adcf857fb9ea3769958ea718df77760"
meta-miraclebox   = "HEAD:0f1aca1dcaaa43f7768aff0c16a0c2ce1b32bdfd"
meta-spycat       = "HEAD:718b41b432dbd0b787ab8a2987462e03103e7793"
meta-gi           = "HEAD:6a9a4ce636831f0d37ae8178bcc2367c0766895f"
meta-local        = "master-next:0bb837464479ce11daa146f2e744e49f877db741"

Initialising tasks: 100% |###################################################################################################| Time: 0:00:09
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: pseudo-native-1.8.1-r0 do_compile: oe_runmake failed
ERROR: pseudo-native-1.8.1-r0 do_compile: Function failed: do_compile (log file is located at /home/davide/openpli_5.0/openpli-oe-core/build/tmp/work/x86_64-linux/pseudo-native/1.8.1-r0/temp/log.do_compile.10929)
ERROR: Logfile of failure stored in: /home/davide/openpli_5.0/openpli-oe-core/build/tmp/work/x86_64-linux/pseudo-native/1.8.1-r0/temp/log.do_compile.10929
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: Building/installing only 64-bit libpseudo.so for pseudo-native.
| NOTE: If you need to run 32-bit executables, ensure that NO32LIBS is set to 0.
| NOTE: make -j 4
| ERROR: oe_runmake failed
| SQLite header for version 3014001 found in /home/davide/openpli_5.0/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr.
| getfattr runs, enabling extended attribute support
| Enabling in-memory database by default.
| mkdir -p lib/pseudo/lib64
| CC="gcc  -isystem/home/davide/openpli_5.0/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/include -march=native -O2 -pipe -pipe -std=gnu99 -Wall -W -Wextra -fPIC -D_LARGEFILE64_SOURCE -D_ATFILE_SOURCE -isystem/home/davide/openpli_5.0/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/include -march=native -O2 -pipe -DPSEUDO_PREFIX='"/home/davide/openpli_5.0/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr"' -DPSEUDO_SUFFIX='""' -DPSEUDO_BINDIR='"bin"' -DPSEUDO_LIBDIR='"lib/pseudo/lib64"' -DPSEUDO_LOCALSTATEDIR='"var/pseudo"' -DPSEUDO_VERSION='"1.8.1"' -DUSE_MEMORY_DB -DPSEUDO_FORCE_ASYNC -DPSEUDO_PASSWD_FALLBACK='NULL'   -DPSEUDO_XATTR_SUPPORT       -O2 -g -L/home/davide/openpli_5.0/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/lib -I/home/davide/openpli_5.0/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/include " ./makewrappers "xattr=true"
| ./maketables enums/*.in
| mkdir -p bin
|   File "./maketables", line 76
|     print "Flags: set for %s" % self.name
|                             ^
| SyntaxError: Missing parentheses in call to 'print'
| make: *** [Makefile:147: tables] Error 1
| make: *** Waiting for unfinished jobs....
|   File "./makewrappers", line 327
|     return """/* This function is not called if pseudo is configured --enable-force-async */
|                                                                                            ^
| TabError: inconsistent use of tabs and spaces in indentation
| make: *** [Makefile:150: wrappers] Error 1
| ERROR: Function failed: do_compile (log file is located at /home/davide/openpli_5.0/openpli-oe-core/build/tmp/work/x86_64-linux/pseudo-native/1.8.1-r0/temp/log.do_compile.10929)
ERROR: Task (virtual:native:/home/davide/openpli_5.0/openpli-oe-core/openembedded-core/meta/recipes-devtools/pseudo/pseudo_1.8.1.bb:do_compile) failed with exit code '1'

[asiBenlik]

What happens? 

I could not make it.

Loading cache: 100% |###################################################################################################################################| Time: 0:00:01
Loaded 3017 entries from dependency cache.
NOTE: /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/openmultiboot/openmultiboot.bb: base_contains is deprecated, please use bb.utils.contains instead.
NOTE: /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/openmultiboot/openmultiboot.bb: base_contains is deprecated, please use bb.utils.contains instead.
NOTE: /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/openmultiboot/openmultiboot.bb: base_contains is deprecated, please use bb.utils.contains instead.
NOTE: /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/openmultiboot/openmultiboot.bb: base_contains is deprecated, please use bb.utils.contains instead.
NOTE: /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/openmultiboot/openmultiboot.bb: base_contains is deprecated, please use bb.utils.contains instead.
NOTE: /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/openmultiboot/openmultiboot.bb: base_contains is deprecated, please use bb.utils.contains instead.
Parsing recipes: 100% |#################################################################################################################################| Time: 0:00:11
Parsing of 2391 .bb files complete (2321 cached, 70 parsed). 3087 targets, 489 skipped, 0 masked, 0 errors.
NOTE: There are 1 recipes to be removed from sysroot vusolose, removing...
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION        = "1.32.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "LinuxMint-17.3"
TARGET_SYS        = "mipsel-oe-linux"
MACHINE           = "vusolose"
DISTRO            = "openpli"
DISTRO_VERSION    = "5"
TUNE_FEATURES     = "o32 fpu-hard mips32"
TARGET_FPU        = ""
meta-oe           
meta-filesystems  
meta-multimedia   
meta-networking   
meta-python       = "HEAD:7a491f384c277ee42ac895fec6fc2ef70f15df4d"
meta              = "HEAD:2a59d0fa7bda78927435603e3049ce373cf6a198"
meta-openpli      
meta-dream        = "master-next:14ae13d35df8689fa8245e987b6b8c4af3737f95"
meta-vuplus       = "HEAD:2621a0fce74c39b36f5fd0fea69e0954f1c76028"
meta-xsarius      = "HEAD:fd1d22a114074aac38aeb4e6f3bfb3053d468a66"
meta-xp           = "HEAD:3b0534aeeb8108d029d3db2cffbcf92d3079bcc2"
meta-xtrend       = "HEAD:e84fd3fdbc28db74aa5f4e2e9b0b8aea419bd9ae"
meta-formuler     = "HEAD:9ba268f8142b2ac3619787f848f4bb322ec22ddf"
meta-hd           = "HEAD:f0cc3625f35c67b9b77f2249639aa25ca82f46f2"
meta-xpeedc       = "HEAD:5dd87db177f8f67725ef6cb220123ca9aee927a6"
meta-wetek        = "HEAD:5868788e42986be336d0e6a5f7b47f741df102bb"
meta-zgemma       = "HEAD:8e3da52e517a8accf27d8869d1fb379f4a8a7b26"
meta-edision      = "HEAD:776934070adcf857fb9ea3769958ea718df77760"
meta-miraclebox   = "HEAD:049167faac2b0665a32200efc098946f8e53f58c"
meta-spycat       = "HEAD:718b41b432dbd0b787ab8a2987462e03103e7793"
meta-gi           = "HEAD:6a9a4ce636831f0d37ae8178bcc2367c0766895f"
meta-local        = "master-next:14ae13d35df8689fa8245e987b6b8c4af3737f95"

Initialising tasks: 100% |##############################################################################################################################| Time: 0:00:09
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: openpli-enigma2-image-1.0-r0 do_image_ubi: Function failed: do_image_ubi (log file is located at /media/yetkin/LINUXX/openpli-next/build/tmp/work/vusolose-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_ubi.5684)
ERROR: Logfile of failure stored in: /media/yetkin/LINUXX/openpli-next/build/tmp/work/vusolose-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_ubi.5684
Log data follows:
| DEBUG: Executing python function set_image_size
| DEBUG: Python function set_image_size finished
| DEBUG: Executing shell function do_image_ubi
| ubinize: volume size was not specified in section "ubifs", assume minimum to fit image "/media/yetkin/LINUXX/openpli-next/build/tmp/work/vusolose-oe-linux/openpli-enigma2-image/1.0-r0/deploy-openpli-enigma2-image-image-complete/openpli-enigma2-5-vusolose.rootfs.ubifs"95232000 bytes (90.8 MiB)
| cp: cannot stat ‘/media/yetkin/LINUXX/openpli-next/build/tmp/deploy/images/vusolose/openpli-enigma2-5-vusolose.rootfs.ubi’: No such file or directory
| WARNING: /media/yetkin/LINUXX/openpli-next/build/tmp/work/vusolose-oe-linux/openpli-enigma2-image/1.0-r0/temp/run.do_image_ubi.5684:1 exit 1 from 'cp /media/yetkin/LINUXX/openpli-next/build/tmp/deploy/images/vusolose/openpli-enigma2-5-vusolose.rootfs.ubi /media/yetkin/LINUXX/openpli-next/build/tmp/deploy/images/vusolose/vuplus/solose/root_cfe_auto.bin'
| ERROR: Function failed: do_image_ubi (log file is located at /media/yetkin/LINUXX/openpli-next/build/tmp/work/vusolose-oe-linux/openpli-enigma2-image/1.0-r0/temp/log.do_image_ubi.5684)
ERROR: Task (/media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_ubi) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4729 tasks of which 4712 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /media/yetkin/LINUXX/openpli-next/meta-openpli/recipes-openpli/images/openpli-enigma2-image.bb:do_image_ubi
Summary: There was 1 ERROR message shown, returning a non-zero exit code

my ubinize-openpli-enigma2-5-vusolose.cfg file

[ubifs]
mode=ubi
image=/media/yetkin/LINUXX/openpli-next/build/tmp/work/vusolose-oe-linux/openpli-enigma2-image/1.0-r0/deploy-openpli-enigma2-image-image-complete/openpli-enigma2-5-vusolose.rootfs.ubifs
vol_id=0
vol_type=dynamic
vol_name=rootfs
vol_flags=autoresize

[ostende]

 

What happens? 

I could not make it.

| cp: cannot stat ‘/media/yetkin/LINUXX/openpli-next/build/tmp/deploy/images/vusolose/openpli-enigma2-5-vusolose.rootfs.ubi’: No such file or directory

did you delet some files or what

[asiBenlik]

I did not erase anything.

This is the first compilation.

[MastaG]

 

I was able to compile the latest head for Vu+ Uno. So far working well. 

 

I think so too, until I tried ffmpeg.
At the library is load, I got an error:

error while loading shared libraries: /usr/lib/libavformat.so.57: ELF file ABI version invalid

But I see that on the openembedded-core has been added glibc patch that would fix it and so I'll try to update openembedded-core again.

I wanted to add that immediately after gcc 6.1 update on openembedded-core, I did not have such problems.

 

P.S.

Or any of openpli watched pull requests and comments on github?

 

Hi Taapat,

 

I have the same issue on ffmpeg atm.

Did you mean this patch for glibc? https://github.com/o...dfee344def9e53a

[Taapat]

Sorry, I do not remember anymore.

But on master-nex already is added my pull request, which for me fix this problem: https://github.com/O...8cc7553bf305977

[peti]

for me upgrade to 3.1.3 solved the issue