Jump to content


Photo

Openpli-5 (still next master)


  • Please log in to reply
1177 replies to this topic

Re: Openpli-5 (still next master) #581 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 13 November 2016 - 16:37

But we do not build DM900 (arm) on our OE, how mipsel affected by arm (that doesn't exist on our OE)?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Openpli-5 (still next master) #582 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 16 November 2016 - 19:48

I am build pli5 with ffmpeg 3.2, christophecvr gstreamer-multibox-dvbmediasink,gstreamer 1.11.0.1(but same 1.9.0)-sat channel works fine,but play some iptv(hls stream) enigma restart and not crash.

 

Re: Openpli-5 (still next master) #583 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 16 November 2016 - 19:58

Log:

action->OkCancelActionsok

playing4097:0:1:1:0:0:0:0:0:0:http%3a//77.120.104.64/hls/newsone-hd/stream.m3u8:NewsOneHD
[eServiceMP3]stoprtmp://sftr89en.edem.tv/iptv/502?key=LLGSQYQBCN
[eServiceMP3]stopstate:PLAYINGpending:VOID_PENDINGret:SUCCESS
[eServiceMP3]destruct!
[eServiceMP3]construct!
[eServiceMP3]startingpipeline
[eServiceMP3]statetransitionNULL->READY
resolvedtoPLAY
resolvedtoPLAY
resolvedtoPLAY
newservicestarted!tryingtodownloadcuts!
RemovePopup,id=ZapError
[eServiceMP3]statetransitionREADY->PAUSED
[eServiceMP3]loadingcuesheet
[eServiceMP3]cutfilenotfound!
resolvedtoPLAY
[eServiceMP3]trickSeeknoneedtounpause!
resolvedtoPLAY
[eServiceMP3]trickSeeknoneedtounpause!
resolvedtoPLAY
[eServiceMP3]trickSeeknoneedtounpause!
newservicestarted!tryingtodownloadcuts!
RemovePopup,id=ZapError
[eServiceMP3]async-done-1video,1audio,0subtitle
[eServiceMP3]AUDIOSTRUCT=audio/mpeg
[eServiceMP3]audiostream=0codec=MPEG-4AAClanguage=und
[eServiceMP3]statetransitionPAUSED->PLAYING
PC:615efeb0
00000000000000010000000000000001
74b639000000001c0000000000000000
00000000000087000000000bcd306000
00000000ffffff000000000177a0d4f0
0000000174b6396c74b6390074b58b78
615bf000615c40d4615c2ed4015e2260
00000000615ef0800000000000000000
61616af0642d8c5074b63d50615efea4
-------FATALSIGNAL
Segmentationfault.
This channel in Openpli4 stop through 20-30 sec?and enigma not restart.But in Openpli4 out of sync through next time when play hls stream.


Re: Openpli-5 (still next master) #584 fairbird

  • Senior Member
  • 413 posts

+20
Neutral

Posted 17 November 2016 - 02:21

I have got this error ...

How to fix it please ?!

| rm -f python/libenigma_python.a
| mipsel-oe-linux-ar cru python/libenigma_python.a python/connections.o python/python.o python/pythonconfig.o python/python_helpers.o python/enigma_python.o
| mipsel-oe-linux-ar: `u' modifier ignored since `D' is the default (see `U')
| mipsel-oe-linux-ranlib python/libenigma_python.a
| make[4]: Leaving directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/lib'
| make[3]: Leaving directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/lib'
| make[2]: Leaving directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/lib'
| Making all in main
| make[2]: Entering directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/main'
| touch version-intermediate.h
| [ -n "`git --git-dir=../../git/.git log --no-color -n 1 --pretty=format:%cd --date=short`" ] && echo "#define ENIGMA2_COMMIT_DATE \"`git --git-dir=../../git/.git log --no-color -n 1 --pretty=format:%cd --date=short`\"" >> version-intermediate.h
| [ -n "`git --git-dir=../../git/.git branch --no-color 2>/dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/\1/'`" ] && echo "#define ENIGMA2_BRANCH \"`git --git-dir=../../git/.git branch --no-color 2>/dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/\1/'`\"" >> version-intermediate.h
| [ -n "`git --git-dir=../../git/.git describe --abbrev=7 --always --long --tags`" ] && echo "#define ENIGMA2_REV \"`git --git-dir=../../git/.git describe --abbrev=7 --always --long --tags`\"" >> version-intermediate.h
| ([ -f version.h ] && diff -q version.h version-intermediate.h >/dev/null) || /usr/bin/install -c -m 644 version-intermediate.h version.h
| make  all-am
| make[3]: Entering directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/main'
| mipsel-oe-linux-g++  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se -DHAVE_CONFIG_H -I. -I../../git/main -I..  -I../../git -I../../git/include -include Python.h -include ../enigma2_config.h -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/python2.7  -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0=/usr/src/debug/enigma2/2.7+gitAUTOINC+da350195d2-r0 -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se= -fvisibility-inlines-hidden -Wall -pthread -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/freetype2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/fribidi -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/gstreamer-1.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/glib-2.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/glib-2.0/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libpng16 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libxml2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/sigc++-1.2/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/sigc++-1.2 -fno-rtti -fno-exceptions -pthread -fopenmp     -MT bsod.o -MD -MP -MF .deps/bsod.Tpo -c -o bsod.o ../../git/main/bsod.cpp
| ERROR: oe_runmake failed
| mipsel-oe-linux-g++  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se -DHAVE_CONFIG_H -I. -I../../git/main -I..  -I../../git -I../../git/include -include Python.h -include ../enigma2_config.h -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/python2.7  -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0=/usr/src/debug/enigma2/2.7+gitAUTOINC+da350195d2-r0 -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se= -fvisibility-inlines-hidden -Wall -pthread -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/freetype2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/fribidi -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/gstreamer-1.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/glib-2.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/glib-2.0/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libpng16 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libxml2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/sigc++-1.2/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/sigc++-1.2 -fno-rtti -fno-exceptions -pthread -fopenmp     -MT enigma.o -MD -MP -MF .deps/enigma.Tpo -c -o enigma.o ../../git/main/enigma.cpp
| mv -f .deps/bsod.Tpo .deps/bsod.Po
| mipsel-oe-linux-g++  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se -DHAVE_CONFIG_H -I. -I../../git/main -I..  -I../../git -I../../git/include -include Python.h -include ../enigma2_config.h -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/python2.7  -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0=/usr/src/debug/enigma2/2.7+gitAUTOINC+da350195d2-r0 -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se= -fvisibility-inlines-hidden -Wall -pthread -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/freetype2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/fribidi -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/gstreamer-1.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/glib-2.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/glib-2.0/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libpng16 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libxml2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/sigc++-1.2/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/sigc++-1.2 -fno-rtti -fno-exceptions -pthread -fopenmp     -MT version_info.o -MD -MP -MF .deps/version_info.Tpo -c -o version_info.o ../../git/main/version_info.cpp
| mv -f .deps/version_info.Tpo .deps/version_info.Po
| mv -f .deps/enigma.Tpo .deps/enigma.Po
| mipsel-oe-linux-g++  -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se  -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0=/usr/src/debug/enigma2/2.7+gitAUTOINC+da350195d2-r0 -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se= -fvisibility-inlines-hidden -Wall -pthread -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/freetype2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/fribidi -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/gstreamer-1.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/glib-2.0 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/glib-2.0/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libpng16 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/libxml2 -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib/sigc++-1.2/include -I/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/include/sigc++-1.2 -fno-rtti -fno-exceptions -pthread -fopenmp      -lxml2 -Wl,-O1  -Wl,--as-needed -o enigma2 -Wl,--export-dynamic bsod.o enigma.o version_info.o \
| 		-Wl,--whole-archive ../lib/actions/libenigma_actions.a ../lib/base/libenigma_base.a ../lib/components/libenigma_components.a ../lib/driver/libenigma_driver.a ../lib/mmi/libenigma_mmi.a ../lib/dvb/libenigma_dvb.a ../lib/dvb_ci/libenigma_dvb_ci.a ../lib/gdi/libenigma_gdi.a ../lib/gui/libenigma_gui.a ../lib/python/libenigma_python.a ../lib/nav/libenigma_nav.a ../lib/network/libenigma_network.a ../lib/service/libenigma_service.a -Wl,--no-whole-archive -lfreetype -lfribidi -lgstpbutils-1.0 -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -ldvbsi++ -lpng16 -lxml2 -lsigc-1.2 -lssl -lcrypto -lgif -ljpeg -L/home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/dm800se/usr/lib -lpython2.7 -ldreamdvd -ltuxtxt -ltuxtxt32bpp -lcrypt -lrt
| /home/raed/openpl5/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/bin/mipsel-oe-linux/../../libexec/mipsel-oe-linux/gcc/mipsel-oe-linux/6.1.1/ld: cannot find -lssl
| collect2: error: ld returned 1 exit status
| make[3]: *** [enigma2] Error 1
| make[3]: Leaving directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/main'
| make[2]: *** [all] Error 2
| rm version-intermediate.h
| make[2]: Leaving directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build/main'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/build'
| make: *** [all] Error 2
| ERROR: Function failed: do_compile (log file is located at /home/raed/openpl5/openpli-oe-core/build/tmp/work/dm800se-oe-linux/enigma2/2.7+gitAUTOINC+da350195d2-r0/temp/log.do_compile.24272)
ERROR: Task /home/raed/openpl5/openpli-oe-core/meta-openpli/recipes-openpli/enigma2/enigma2.bb:do_compile (/home/raed/openpl5/openpli-oe-core/meta-openpli/recipes-openpli/enigma2/enigma2.bb:do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4437 tasks of which 4402 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/raed/openpl5/openpli-oe-core/meta-openpli/recipes-openpli/enigma2/enigma2.bb:do_compile

Thank you


Edited by fairbird, 17 November 2016 - 02:22.

DM500s
DM800

DM800se

DM920UHD


Re: Openpli-5 (still next master) #585 fairbird

  • Senior Member
  • 413 posts

+20
Neutral

Posted 17 November 2016 - 03:41

Ok...

I have fixed ...

remove tmp folder from build tree 

and compile image again after restart computer ...


DM500s
DM800

DM800se

DM920UHD


Re: Openpli-5 (still next master) #586 zeros

  • PLi® Contributor
  • 1,635 posts

+61
Good

Posted 17 November 2016 - 15:58

Hooray, without errors, only some of the warnings for dreambox! I just tried today over the time.  :)

 

Openembedded for the OpenPLi 4 environment has been initialized

properly. Now you can start building your image, by doing either:
 
 MACHINE=... make image
 
        or:
 
 cd /home/user1/openpli5/build
 source env.source
 MACHINE=... bitbake openpli-enigma2-image
 
        or, if you want to build not just the image, but the optional packages in the feed as well:
 
 MACHINE=... bitbake openpli-enigma2-feed
 
user1@Debian8:~/openpli5$ cd ~/openpli5
user1@Debian8:~/openpli5$ MACHINE=dm7020hd make image
Building image for dm7020hd
Parsing recipes: 100% |######################################################################################################################################################################################################| Time: 02:00:06
Parsing of 2176 .bb files complete (0 cached, 2176 parsed). 2665 targets, 335 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
 
Build Configuration:
BB_VERSION        = "1.25.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Debian-8.6"
TARGET_SYS        = "mipsel-oe-linux"
MACHINE           = "dm7020hd"
DISTRO            = "openpli"
DISTRO_VERSION    = "4"
TUNE_FEATURES     = "o32 fpu-hard mips32"
TARGET_FPU        = ""
meta-oe
meta-filesystems
meta-multimedia
meta-networking
meta-python       = "(detachedfrom9c926ef):9c926ef2d463e643fb0dc87f6535a12e35d039ab"
meta              = "(detachedfromeb9d896):eb9d896db2fc67bac8efd258744d06fbbee87f06"
meta-openpli
meta-dream        = "master:8c7ba58f36ea50dfff30fcec1166460a6463bda9"
meta-vuplus       = "(detachedfrom8c1ad6d):8c1ad6d94b62ca45096a746d0cef0c523a977b0c"
meta-xsarius      = "(detachedfromfd1d22a):fd1d22a114074aac38aeb4e6f3bfb3053d468a66"
meta-xp           = "(detachedfrom3b0534a):3b0534aeeb8108d029d3db2cffbcf92d3079bcc2"
meta-xtrend       = "(detachedfrom4dc1373):4dc1373ccbf7a5d0c789ee3d85e0ac0018bb7f7f"
meta-formuler     = "(detachedfrom9ba268f):9ba268f8142b2ac3619787f848f4bb322ec22ddf"
meta-hd           = "(detachedfrombb15f78):bb15f78e397d8961947db25fb211271f9fc5fc01"
meta-xpeedc       = "(detachedfrom5dd87db):5dd87db177f8f67725ef6cb220123ca9aee927a6"
meta-wetek        = "(detachedfrom5868788):5868788e42986be336d0e6a5f7b47f741df102bb"
meta-zgemma       = "(detachedfrom8e3da52):8e3da52e517a8accf27d8869d1fb379f4a8a7b26"
meta-edision      = "(detachedfrom7769340):776934070adcf857fb9ea3769958ea718df77760"
meta-miraclebox   = "(detachedfrom0f1aca1):0f1aca1dcaaa43f7768aff0c16a0c2ce1b32bdfd"
meta-spycat       = "(detachedfrom718b41b):718b41b432dbd0b787ab8a2987462e03103e7793"
meta-gi           = "(detachedfrom6a9a4ce):6a9a4ce636831f0d37ae8178bcc2367c0766895f"
meta-local        = "master:8c7ba58f36ea50dfff30fcec1166460a6463bda9"
 
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL http://gnome-build-s...id-1.6.2.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.3.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.or...r-1.5.1.tar.bz2, attempting MIRRORS if available
WARNING: QA Issue: gstreamer: configure was passed unrecognised options: --disable-docs-build --with-check [unknown-configure-option]
WARNING: Failed to fetch URL http://serf.googleco...f-1.3.8.tar.bz2, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.or...-1.8.10.tar.bz2, attempting MIRRORS if available
WARNING: Failed to fetch URL http://downloads.sou...g-1.6.16.tar.xz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://libproxy.goog...roxy-0.4.11.zip, attempting MIRRORS if available
WARNING: QA Issue: gst-plugins-base-apps requires /usr/bin/perl, but no providers in its RDEPENDS [file-rdeps]
WARNING: Failed to fetch URL http://downloads.sou...t-0.1.5.tar.bz2, attempting MIRRORS if available
WARNING: Failed to fetch URL ftp://ftp.remotesensing.org/pub/libtiff/tiff-4.0.3.tar.gz, attempting MIRRORS if available
WARNING: QA Issue: libtuxtxt: Files/directories were installed but not shipped
  /usr/lib/libtuxtxt.so [installed-vs-shipped]
WARNING: QA Issue: bluez4: configure was passed unrecognised options: --disable-udevrules [unknown-configure-option]
WARNING: Failed to fetch URL http://downloads.sou...se-2.9.3.tar.gz, attempting MIRRORS if available
WARNING: QA Issue: cdrkit requires /usr/bin/perl, but no providers in its RDEPENDS [file-rdeps]
WARNING: Failed to fetch URL http://jerakeen.org/...ap-0.7.1.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://ushare.geexbo...re-1.1a.tar.bz2, attempting MIRRORS if available
WARNING: QA Issue: giflib-utils requires /usr/bin/perl, but no providers in its RDEPENDS [file-rdeps]
WARNING: QA Issue: File '/usr/bin/ushare' from ushare was already stripped, this will prevent future debugging! [already-stripped]
WARNING: QA Issue: gst-plugins-good: configure was passed unrecognised options: --without-check [unknown-configure-option]
WARNING: QA Issue: gst-plugins-bad-bz2 rdepends on libbz2, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-bad-cog rdepends on libpng, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-bad-dtsdec rdepends on libdca, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-bad-resindvd rdepends on libdvdread, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-bad-resindvd rdepends on libdvdnav, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-bad-sndfile rdepends on libsndfile1, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-good-matroska rdepends on libbz2, but it isn't a build dependency? [build-deps]
WARNING: /home/user1/openpli5/build/tmp/work/dm7020hd-oe-linux/dreambox-dvb-modules-dm7020hd/3.2-20160615-r7.0/dreambox-dvb-modules-dm7020hd-3.2-20160615 ('S') don't exist, you must set 'S' to a proper value
WARNING: QA Issue: dreambox-dvb-modules-dm7020hd: Files/directories were installed but not shipped
  /lib/modules/3.2-dm7020hd/extra/LICENSE [installed-vs-shipped]
WARNING: /home/user1/openpli5/build/tmp/work/mips32el-oe-linux/sysvinit-inittab/2.88dsf-r6/sysvinit-2.88dsf ('S') don't exist, you must set 'S' to a proper value
WARNING: Failed to fetch URL ftp://metalab.unc.edu/pub/Linux/utils/file/stat-3.3.tar.gz, attempting MIRRORS if available
WARNING: dreambox-enigma2-config: No generic license file exists for: WTFPL in any provider
WARNING: QA Issue: enigma2-plugin-extensions-openuitzendinggemist rdepends on python-argparse, but it isn't a build dependency? [build-deps]
WARNING: /home/user1/openpli5/build/tmp/work/all-oe-linux/volatile-media/2-r0/volatile-media-2 ('S') don't exist, you must set 'S' to a proper value
WARNING: openpli-bootlogo: No generic license file exists for: CC-BY-NC-ND-4.0 in any provider
WARNING: /home/user1/openpli5/build/tmp/work/mips32el-oe-linux/kernel-params/20110114-r0/kernel-params-20110114 ('S') don't exist, you must set 'S' to a proper value
WARNING: QA Issue: nfs-utils requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
WARNING: QA Issue: samba: configure was passed unrecognised options: --without-libtalloc [unknown-configure-option]
WARNING: QA Issue: samba: Files/directories were installed but not shipped
  /run
  /run/lock
  /usr/lib/idmap
  /usr/lib/rpc
  /usr/lib/nss_info
  /usr/lib/pdb [installed-vs-shipped]
WARNING: QA Issue: samba requires /usr/bin/perl, but no providers in its RDEPENDS [file-rdeps]
NOTE: Tasks Summary: Attempted 4006 tasks of which 10 didn't need to be rerun and all succeeded.
 
Summary: There were 40 WARNING messages shown.
user1@Debian8:~/openpli5$
 

 

Instead openpli4 in file build.txt use the openpli5  ;)

Attached Files


DM920UHD DVB-S2X TRIPLE tuner + Triple M.S tuner DVB-S2X, DVB-T2/T, QboxHD, QboxHD Mini, Icecrypt T2300HD,
Qviart Lunix3 4K, Raspberry Pi 4 Model B 4GB & 8GB

Vertex 4K60 4:4:4 600MHz


Re: Openpli-5 (still next master) #587 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 17 November 2016 - 17:59

@Milo

 

Vuduo2 does not build anymore with last master. Looks like something is going wrong with rootfs and ubi end tasks.

 

For try I just removed the full vuduo2 kernel . with :

MACHINE=vuduo2 bitbake -b /home/christophe/openpli50/openpli-oe-core/meta-vuplus/recipes-bsp/linux/linux-vuduo2_3.13.5.bb -c cleanall
MACHINE=vuduo2 bitbake cvr-image -c clean


The rebuild image all build nice just the end error. :

NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: linux-vuduo2-3.13.5-r1.6.4 do_populate_lic: linux-vuduo2: No generic license file exists for: GPL in any provider
WARNING: linux-vuduo2-3.13.5-r1.6.4 do_package: QA Issue: linux-vuduo2: Files/directories were installed but not shipped in any package:
  /tmp/vmlinux-3.13.5
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
linux-vuduo2: 1 installed and not shipped files. [installed-vs-shipped]
ERROR: cvr-image-1.0-r0 do_image_ubi: Function failed: do_image_ubi (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/vuduo2-oe-linux/cvr-image/1.0-r0/temp/log.do_image_ubi.9632)
ERROR: Logfile of failure stored in: /home/christophe/openpli50/openpli-oe-core/build/tmp/work/vuduo2-oe-linux/cvr-image/1.0-r0/temp/log.do_image_ubi.9632
Log data follows:
| DEBUG: Executing python function set_image_size
| DEBUG: Python function set_image_size finished
| DEBUG: Executing shell function do_image_ubi
| ubinize: volume size was not specified in section "ubifs", assume minimum to fit image "/home/christophe/openpli50/openpli-oe-core/build/tmp/work/vuduo2-oe-linux/cvr-image/1.0-r0/deploy-cvr-image-image-complete/openpli-enigma2-5-vuduo2.rootfs.ubifs"106913792 bytes (102.0 MiB)
| cp: cannot stat '/home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/vuduo2/openpli-enigma2-5-vuduo2.rootfs.ubi': No such file or directory
| WARNING: /home/christophe/openpli50/openpli-oe-core/build/tmp/work/vuduo2-oe-linux/cvr-image/1.0-r0/temp/run.do_image_ubi.9632:1 exit 1 from 'cp /home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/vuduo2/openpli-enigma2-5-vuduo2.rootfs.ubi /home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/vuduo2/vuplus/duo2/root_cfe_auto.bin'
| ERROR: Function failed: do_image_ubi (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/vuduo2-oe-linux/cvr-image/1.0-r0/temp/log.do_image_ubi.9632)
ERROR: Task (/home/christophe/openpli50/openpli-oe-core/meta-local/recipes-local/images/cvr-image.bb:do_image_ubi) failed with exit code '1'
NOTE: Tasks Summary: Attempted 7554 tasks of which 7529 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/christophe/openpli50/openpli-oe-core/meta-local/recipes-local/images/cvr-image.bb:do_image_ubi
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

however actually all is build nice. So something is changed in the rootfs and or ubi task.

or maybe this warning is a real one which causes later on in final build a problem

WARNING: linux-vuduo2-3.13.5-r1.6.4 do_package: QA Issue: linux-vuduo2: Files/directories were installed but not shipped in any package:
  /tmp/vmlinux-3.13.5

the vmlinux is build and is in work directory

openpli50/openpli-oe-core/build/tmp/work/vuduo2-oe-linux/linux-vuduo2/3.13.5-r1.6.4/image/tmp



Re: Openpli-5 (still next master) #588 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 17 November 2016 - 18:14

Try: http://forums.openpl...-28#entry612751
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: Openpli-5 (still next master) #589 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 17 November 2016 - 18:43

@athoik

 

Yes that solves the problem image now build. :)

 

Can that patch be pushed ?



Re: Openpli-5 (still next master) #590 MiLo

  • PLi® Core member
  • 14,055 posts

+298
Excellent

Posted 17 November 2016 - 18:52

alternatively, to avoid touching oe submodule bbclass, openpli.conf could be adjusted like this:

diff --git a/meta-openpli/conf/distro/openpli.conf b/meta-openpli/conf/distro/openpli.conf
index bc0556c..7d05ab9 100644
--- a/meta-openpli/conf/distro/openpli.conf
+++ b/meta-openpli/conf/distro/openpli.conf
@@ -20,6 +20,7 @@ IMAGE_LINK_NAME = ""
 CACHE ?= "${TMPDIR}/cache/${LIBC}/${MACHINE}"
 DEPLOY_DIR ?= "${TMPDIR}/deploy/${LIBC}"
 DEPLOY_DIR_IMAGE = "${DEPLOY_DIR}/images/${MACHINE}"
+IMGDEPLOYDIR_forcevariable = "${DEPLOY_DIR_IMAGE}"
 
 VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
 VIRTUAL-RUNTIME_login_manager = "busybox"
however I guess default image.bbclass assignment should be weaken indeed, to allow override it in layers
(btw, I somehow thought you can simply override even hard assignment in distro.conf, and it turned out you can't /without forcing/ in this case?)


I fear though that simply forcing that variable will lead to other, subtle, problems.
Real musicians never die - they just decompose

Re: Openpli-5 (still next master) #591 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 17 November 2016 - 19:39

gues so the dm8000 has similar issue even with that patch it does not build

NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: cvr-image-1.0-r0 do_image_ubinfi: Function failed: do_image_ubinfi (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/dm8000-oe-linux/cvr-image/1.0-r0/temp/log.do_image_ubinfi.22635)
ERROR: Logfile of failure stored in: /home/christophe/openpli50/openpli-oe-core/build/tmp/work/dm8000-oe-linux/cvr-image/1.0-r0/temp/log.do_image_ubinfi.22635
Log data follows:
| DEBUG: Executing python function set_image_size
| DEBUG: Python function set_image_size finished
| DEBUG: Executing shell function do_image_ubinfi
| ubinize: volume size was not specified in section "root", assume minimum to fit image "/home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000/openpli-enigma2-5-dm8000.rootfs.ubifs"81414144 bytes (77.6 MiB)
| /home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000/secondstage-dm8000.bin: No such file or directory
| Invalid boot partition!
| WARNING: /home/christophe/openpli50/openpli-oe-core/build/tmp/work/dm8000-oe-linux/cvr-image/1.0-r0/temp/run.do_image_ubinfi.22635:1 exit 1 from 'buildimage --arch dm8000 ${EXTRA_BUILDCMD} --erase-block-size 0x20000 --flash-size 0x10000000 --sector-size 2048 --boot-partition 0x100000:/home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000/secondstage-dm8000.bin --data-partition 0x700000:/home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000/openpli-enigma2-5-dm8000.boot.jffs2 --data-partition 0xF800000:/home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000/openpli-enigma2-5-dm8000.rootfs.ubi > /home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000/openpli-enigma2-5-dm8000.nfi'
| ERROR: Function failed: do_image_ubinfi (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/dm8000-oe-linux/cvr-image/1.0-r0/temp/log.do_image_ubinfi.22635)
ERROR: Task (/home/christophe/openpli50/openpli-oe-core/meta-local/recipes-local/images/cvr-image.bb:do_image_ubinfi) failed with exit code '1'
NOTE: Tasks Summary: Attempted 7481 tasks of which 7476 didn't need to be rerun and 1 failed.

Summary: 1 task failed:
  /home/christophe/openpli50/openpli-oe-core/meta-local/recipes-local/images/cvr-image.bb:do_image_ubinfi


Re: Openpli-5 (still next master) #592 blzr

  • PLi® Core member
  • 2,270 posts

+118
Excellent

Posted 17 November 2016 - 20:17

for dreambox you also probably need some tweaks in image_types_nfi.bbclass,
take a look at @Taapat's post #546
True sarcasm doesn't need green font...

Re: Openpli-5 (still next master) #593 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 17 November 2016 - 21:18

stil not ok but if I do the changes mentionned for nfi bb class

then do

MACHINE=dm8000 bitbake cvr-image -f -c rootfs

Then copy manually the file

 

secondstage-dm8000.bin

 

to map

/home/christophe/openpli50/openpli-oe-core/build/tmp/deploy/images/dm8000

 

Then again

MACHINE=dm8000 bitbake cvr-image


it will just finish off the ubivfi task and it's ok.

 

there are just severe errors in the oe used now and I realy think severe bugs in it. The bbclas files are very wrong in that what is used now.



Re: Openpli-5 (still next master) #594 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 18 November 2016 - 00:40

For the dm8000 It can be solved by a work-around hack. Problem is that the second stage loader is not copied to the final deploy during during rootfs (which starts by erasing the final deploy dir.).

 

For me I just added to my personal image file  at the end.

do_extra() {
	if [ -f "${IMAGE_ROOTFS}/tmp/secondstage-${MACHINE}.bin" ]; then
		cp -af ${IMAGE_ROOTFS}/tmp/secondstage-${MACHINE}.bin ${IMGDEPLOYDIR}/secondstage-${MACHINE}.bin
	fi
}

addtask extra before do_image_ubinfi after do_rootfs

Now it will perform that copy of the second stage loader from the rootfs deploy to the final deploy dir. Before the task do_image_ubinfi.



Re: Openpli-5 (still next master) #595 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 18 November 2016 - 16:00

So @MiLo,

 

To resume :

 

The last oe-core has a serious different behaviour i mean rather considerable.

This causes requirement for big changes changes into build finalize fase. However mostly the finalize fase. except for dm8000 also the :

http://forums.openpl...ndpost&p=614098

 

is caused by this oe-core update.

 

Everything can be solved quit easely unfortunately on more then one way.

 

For vuduo2 only change from @blzr on :

http://forums.openpl...ndpost&p=612751

 

is required.

 

For dm8000 :

Changes required are

http://forums.openpl...ndpost&p=612751

 

From @Taapat only the nfi section here. cause The force from blzr is used (even the full use of taapat and clean fresh build only does not work on dm8000 an extra is required for that I keep using blzr + Taapat ubinfi class only)

https://github.com/T...fc317aa8b969b79

 

Final touch for dm8000

 

By image cp the secondstage-dm8000.bin to deploy dir (before it was done by rootfs bbclass now anymore) like I described on :

http://forums.openpl...ndpost&p=616561

 

Ok this last change can be set in : openpli-image.bb also and will break nothing else.

 

But the  Beeker change breaks build for other arch then mipsel32el

 

So I gues somehow the rootfs bbclass and perhaps another should be altered or ...?? what are the intentions ?



Re: Openpli-5 (still next master) #596 Beeker

  • PLi® Contributor
  • 1,602 posts

+203
Excellent

Posted 18 November 2016 - 16:48

For dreamboxes we can use this for bbappends.It's machine specific.

buildtools-tarball.bbappend and uninative.tarball.bbappend(both are equal).

TARGET_ARCH_dm8000 = "mipsel"
TARGET_OS_dm8000 = "linux"

TARGET_ARCH_dm800se = "mipsel"
TARGET_OS_dm800se = "linux"

TARGET_ARCH_dm7020hd = "mipsel"
TARGET_OS_dm7020hd = "linux"

Perhaps it can be simplified.I tried dm***, dm%%% etc instead of each machine(just dreambox doesn't work), but i can find the right syntax.

This shouldn't break ARM builds..


Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.


Re: Openpli-5 (still next master) #597 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 18 November 2016 - 17:45

For dreamboxes we can use this for bbappends.It's machine specific.

buildtools-tarball.bbappend and uninative.tarball.bbappend(both are equal).

TARGET_ARCH_dm8000 = "mipsel"
TARGET_OS_dm8000 = "linux"

TARGET_ARCH_dm800se = "mipsel"
TARGET_OS_dm800se = "linux"

TARGET_ARCH_dm7020hd = "mipsel"
TARGET_OS_dm7020hd = "linux"

Perhaps it can be simplified.I tried dm***, dm%%% etc instead of each machine(just dreambox doesn't work), but i can find the right syntax.

This shouldn't break ARM builds..

Yes that would be nice but ....

 

My final question to @MiLo :

 

So I gues somehow the rootfs bbclass and perhaps another should be altered or ...?? what are the intentions ?

 

Is not answered yet ........... ??

 

So You may losing You're time by making something ok for now and tommorow  a bbclass will be altered ? or again another oe-core ... You have to start all over again.

And testings is very nice but at the end You're bussy for so what a full week and all You're efforts done can be trowed away just cause again a change in oe-core ??

On top of it the current master-next does have a complete unusable gstreamer implementation. On vuduo2 just almost nothing works with the base gstreamer like they set. The box just goes from start till end from segfault to segfault. with that  gstreamer recipe 1.8.xx .



Re: Openpli-5 (still next master) #598 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 18 November 2016 - 17:57

 

Log:

action->OkCancelActionsok

playing4097:0:1:1:0:0:0:0:0:0:http%3a//77.120.104.64/hls/newsone-hd/stream.m3u8:NewsOneHD
[eServiceMP3]stoprtmp://sftr89en.edem.tv/iptv/502?key=LLGSQYQBCN
[eServiceMP3]stopstate:PLAYINGpending:VOID_PENDINGret:SUCCESS
[eServiceMP3]destruct!
[eServiceMP3]construct!
[eServiceMP3]startingpipeline
[eServiceMP3]statetransitionNULL->READY
resolvedtoPLAY
resolvedtoPLAY
resolvedtoPLAY
newservicestarted!tryingtodownloadcuts!
RemovePopup,id=ZapError
[eServiceMP3]statetransitionREADY->PAUSED
[eServiceMP3]loadingcuesheet
[eServiceMP3]cutfilenotfound!
resolvedtoPLAY
[eServiceMP3]trickSeeknoneedtounpause!
resolvedtoPLAY
[eServiceMP3]trickSeeknoneedtounpause!
resolvedtoPLAY
[eServiceMP3]trickSeeknoneedtounpause!
newservicestarted!tryingtodownloadcuts!
RemovePopup,id=ZapError
[eServiceMP3]async-done-1video,1audio,0subtitle
[eServiceMP3]AUDIOSTRUCT=audio/mpeg
[eServiceMP3]audiostream=0codec=MPEG-4AAClanguage=und
[eServiceMP3]statetransitionPAUSED->PLAYING
PC:615efeb0
00000000000000010000000000000001
74b639000000001c0000000000000000
00000000000087000000000bcd306000
00000000ffffff000000000177a0d4f0
0000000174b6396c74b6390074b58b78
615bf000615c40d4615c2ed4015e2260
00000000615ef0800000000000000000
61616af0642d8c5074b63d50615efea4
-------FATALSIGNAL
Segmentationfault.
This channel in Openpli4 stop through 20-30 sec?and enigma not restart.But in Openpli4 out of sync through next time when play hls stream.

 

Yes this is a very known issue. But comes cause You played an rtmp  stream before. The new stream start is forced while the older has not free the needed mem segments cause gstreamer is locked in state pending.

[eServiceMP3]stopstate:PLAYINGpending:VOID_PENDINGret:SUCCESS

The problem is related gstreamer versus rtmp  but to solve that ??  But yes it will always cause a segfault and enigma2 crash.


Edited by christophecvr, 18 November 2016 - 17:58.


Re: Openpli-5 (still next master) #599 foxbob

  • Senior Member
  • 624 posts

+18
Neutral

Posted 18 November 2016 - 18:08

This problem occurs when gstreamer recipes is .bb file(full),but when I use .bbappend file(short) - ok.



Re: Openpli-5 (still next master) #600 christophecvr

  • Senior Member
  • 3,131 posts

+140
Excellent

Posted 18 November 2016 - 19:09

This problem occurs when gstreamer recipes is .bb file(full),but when I use .bbappend file(short) - ok.

Actually this problem has always been there since now more then 3 to 4 years. Was there with gst-0.10 up till now indeed today 1.9 (by me) but is related to rtmp and will definetelly not be always there but on some times of the day. It also has nothing to do with hls it will occur when switching over from that specific rtmp channel to any other media using the player(which uses gstreamer mediasinks). So switching from that rtmp channel to a file based media will cause same crash. But not always it may vary and so You have the wrong impression that test with x is ok with Y not. If You test very deep and foor a week long You will notice that it actually happens regularly on whatever gstreamer version you have. From whatever stream or media (using the mediasinks) you are going to . And yes gstreamer may hang up on gstreamer stop by a rtmp//  link based media not always but many times why  ? that must be found out but it only occurs when using rtmp and is there already since gst 0.xx   till now up to 1.11.




5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users