Will OpenPLi 4 support stop after OpenPli 5 release?
Openpli-5 (still next master)
Re: Openpli-5 (still next master) #141
Re: Openpli-5 (still next master) #142
Posted 30 March 2016 - 15:54
No decision has been made about that yet, but we will probably stop the build at some point in time. It is very difficult and time consuming to maintain two different codebases.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Openpli-5 (still next master) #143
Posted 30 March 2016 - 16:12
i get this error
Build Configuration:
BB_VERSION = "1.29.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-15.10"
TARGET_SYS = "mipsel-oe-linux"
MACHINE = "vuduo2"
DISTRO = "openpli"
DISTRO_VERSION = "5"
TUNE_FEATURES = "o32 fpu-hard mips32"
TARGET_FPU = ""
meta-oe
meta-filesystems
meta-multimedia
meta-networking
meta-python = "HEAD:44f0e74954628d6a3d04fa5249dbe0c94f6dff59"
meta = "HEAD:34e7292fb40635cee1f1237ac3156530f8dfce37"
meta-openpli
meta-dream = "master-next:ead1ad08bdf69d0b521aa444281b3d36cae03bb0"
meta-vuplus = "HEAD:a01227dd046d6bac58801629158d8813efe8c5dc"
meta-xsarius = "HEAD:6a3dfce2f6948e4cd854d5f1ee1dc034a09340d7"
meta-xp = "HEAD:a76d71624dcdc6185cb75276c565fa2bace086d2"
meta-xtrend = "HEAD:3db13416bc92c35488ffdc7885849c9433d8aa81"
meta-formuler = "HEAD:0f5c174099e9cc7e038a4d1d9e07000df102b6ba"
meta-hd = "HEAD:938b6a10f3360480b8b0239c2353fad4afb2b51b"
meta-xpeedc = "HEAD:dbde5f66bb0486d72609a20e882dad0eacae8645"
meta-wetek = "HEAD:dad4b116612c73d2cab21280500d1c2fcf54df04"
meta-zgemma = "HEAD:d5452f6ccafd40a0e8551c34ede47d22628940fb"
meta-edision = "HEAD:d77362ac447a2d054608ad498ac63c73a2272a8c"
meta-local = "master-next:ead1ad08bdf69d0b521aa444281b3d36cae03bb0"
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: mpfr-native-3.1.3-r0 do_fetch: Failed to fetch URL http://www.mpfr.org/...fr-3.1.3.tar.xz, attempting MIRRORS if available
ERROR: libtalloc-2.1.3-r0 do_configure: Function failed: do_configure (log file is located at /home/jan-egil/openpli-next/build/tmp/work/mips32el-oe-linux/libtalloc/2.1.3-r0/temp/log.do_configure.15285)
ERROR: Logfile of failure stored in: /home/jan-egil/openpli-next/build/tmp/work/mips32el-oe-linux/libtalloc/2.1.3-r0/temp/log.do_configure.15285
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| cat: /home/jan-egil/openpli-next/meta-openembedded/meta-oe/files/waf-cross-answers/cross-answers-mipsel.txt: No such file or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /home/jan-egil/openpli-next/build/tmp/work/mips32el-oe-linux/libtalloc/2.1.3-r0/temp/log.do_configure.15285)
ERROR: Task 2101 (/home/jan-egil/openpli-next/meta-openembedded/meta-networking/recipes-support/libtalloc/libtalloc_2.1.3.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1235 tasks of which 0 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed:
/home/jan-egil/openpli-next/meta-openembedded/meta-networking/recipes-support/libtalloc/libtalloc_2.1.3.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:86: recipe for target 'image' failed
make: *** [image] Error 1
Attached Files
Re: Openpli-5 (still next master) #144
Posted 30 March 2016 - 16:17
www.mpfr.org seems to be offline at the moment.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Openpli-5 (still next master) #145
Re: Openpli-5 (still next master) #146
Posted 30 March 2016 - 17:40
I personally stopped trying to compile pli ... higher then 4.
WHY ?????
It's all shitty , pli mod's DO NOT LISTEN to remerkas and probs . The gst versions they use sucks for 100 % and ......
And after a remark like I just did some of idiot pli moderator will abuse his power to give a -1 one to my remark which I can't return to him .
Re: Openpli-5 (still next master) #147
Posted 30 March 2016 - 17:51
It probably has something to do with this kind of language, and repeating yourself over and over again. Which is not appreciated. Certainly not in a non-related topic.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Openpli-5 (still next master) #148
Posted 30 March 2016 - 18:50
It probably has something to do with this kind of language, and repeating yourself over and over again. Which is not appreciated. Certainly not in a non-related topic.
You're fun , and always speaking about language and .... bla bla bla ...
I made and opened this topic NOT TO COMPLAIN but did hoped (I do now understand its a bad hope ???) to have a real nice stable new image , well I do now see that i'm self A idiot stupid naif person and that the pli team does NOT WANT a good stable image
even the contrary and you're comment just proved that by 100 %.
Re: Openpli-5 (still next master) #149
Posted 30 March 2016 - 22:53
You act like a small child being denied a piece of candy. Grow up please.
If you have something good to contribute, do that. But remember that we decide what the definition of "good" is, and not you. Time and time again you get feedback, but stubornly you refuse to see things any other than your way. If you don't like that, if you can't deal with that, if you can't live with that, sorry, but that is your problem. Stop complaining and be constructive. This behaviour doesn't lead to anything...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Openpli-5 (still next master) #150
Re: Openpli-5 (still next master) #151
Posted 31 March 2016 - 00:49
You act like a small child being denied a piece of candy. Grow up please.
If you have something good to contribute, do that. But remember that we decide what the definition of "good" is, and not you. Time and time again you get feedback, but stubornly you refuse to see things any other than your way. If you don't like that, if you can't deal with that, if you can't live with that, sorry, but that is your problem. Stop complaining and be constructive. This behaviour doesn't lead to anything...
Well sorry very nice. I made this topic in a positive creative way that's all. I made a lot constructive remarks even a lot of tests (and there very very extensive ones). This to support the master-next. Actually to help MiLo to adjust the last versions, this with the goal of a future name ,, ?? but I guess pli5 . This all instead of sticking to the master (modified for gst-1.0).
That all do cost a tremendous extra time (apart from the fact that I'm bussy e2-gst general media support problem).
Ok yes I stopped whit it for 9 weeks now , and this simply since a major extreme bug of e2 is still not admitted by the guys who call themselves experts. ?????
Well they had 9 weeks to test themselves and did not ....
If telling the trough and real facts is childish , yes then I'm childish sorry I'm not perfect , guess that's life not ?
Edited by christophecvr, 31 March 2016 - 00:50.
Re: Openpli-5 (still next master) #152
Posted 31 March 2016 - 22:40
i get this error
Summary: 1 task failed:
/home/jan-egil/openpli-next/meta-openembedded/meta-networking/recipes-support/libtalloc/libtalloc_2.1.3.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Makefile:86: recipe for target 'image' failed
make: *** [image] Error 1
You can add the libtalloc patch, I took it from OpenATV https://github.com/o...pport/libtalloc
After this I get a similar problem with libtevent_0.9.25.bb
I think the latest Openembedded upgrade was not a very good one...
Amiko8240, DM500HD, DM800, DM800SE, DM800SESR4, DM800SEV2, VU+ SoloSEV2, VU+ UnoSE
Re: Openpli-5 (still next master) #153
Re: Openpli-5 (still next master) #154
Posted 1 April 2016 - 08:41
...
You can add the libtalloc patch, I took it from OpenATV
Please don't, we'd have to revert that later.
I think the latest Openembedded upgrade was not a very good one...
Just use the ref before it then. No one is forcing you to use the head of the master-next branch.
Re: Openpli-5 (still next master) #155
Posted 1 April 2016 - 11:37
@Chris: I use master-next with several boxes. What are the issues you have encountered?
tried but currently severe build issues master next.
Packages :
/home/christophe/openpli50/openpli-oe-core/meta-openembedded/meta-networking/recipes-support/libtalloc/libtalloc_2.1.3.bb, do_configure /home/christophe/openpli50/openpli-oe-core/meta-openpli/recipes-multimedia/gstreamer/gstreamer1.0_git.bb, do_compile /home/christophe/openpli50/openpli-oe-core/meta-openembedded/meta-networking/recipes-support/libtdb/libtdb_1.3.7.bb, do_configure /home/christophe/openpli50/openpli-oe-core/meta-openpli/recipes-multimedia/rtmp/librtmp.bb, do_compile
are failing (note librtmp required for gstreamer). Looks like the is something wrong with the ld scripts with last openembedded. I do not now which was the last ok working.
Tried to solve using CFLAGS += "-I/blabla" LDFLAGS += "-L/blabla" but no luck (for librtmp by example but the best i could get is till
ERROR: Logfile of failure stored in: /home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/temp/log.do_compile.5249 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j 8 CROSS_COMPILE=mipsel-oe-linux- CFLAGS= -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include -fPIC LDFLAGS=-Wl,-O1 -Wl,--as-needed -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/lib -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/lib -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/lib -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/lib/mipsel-oe-linux/5.3.0 | mipsel-oe-linux-gcc -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include -fPIC -c -o rtmp.o rtmp.c | mipsel-oe-linux-gcc -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include -fPIC -c -o log.o log.c | mipsel-oe-linux-gcc -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include -fPIC -c -o amf.o amf.c | mipsel-oe-linux-gcc -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include -fPIC -c -o hashswf.o hashswf.c | mipsel-oe-linux-gcc -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/git/librtmp=/usr/src/librtmp -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2= -I/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/include -fPIC -c -o parseurl.o parseurl.c | mipsel-oe-linux-ar rs librtmp.a rtmp.o log.o amf.o hashswf.o parseurl.o | mipsel-oe-linux-gcc -shared -Wl,-soname,librtmp.so.1 -Wl,-O1 -Wl,--as-needed -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/lib -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/lib -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/lib -L/home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/vuduo2/usr/lib/mipsel-oe-linux/5.3.0 -o librtmp.so.1 rtmp.o log.o amf.o hashswf.o parseurl.o -lssl -lcrypto -lz | mipsel-oe-linux-ar: creating librtmp.a | /home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/libexec/mipsel-oe-linux/gcc/mipsel-oe-linux/5.3.0/ld: cannot find crti.o: No such file or directory | /home/christophe/openpli50/openpli-oe-core/build/tmp/sysroots/x86_64-linux/usr/libexec/mipsel-oe-linux/gcc/mipsel-oe-linux/5.3.0/ld: cannot find crtbeginS.o: No such file or directory | collect2: error: ld returned 1 exit status | make: *** [librtmp.so.1] Error 1 | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (log file is located at /home/christophe/openpli50/openpli-oe-core/build/tmp/work/mips32el-oe-linux/librtmp/2.4+gitAUTOINC+a1900c3e15-r2/temp/log.do_compile.5249) ERROR: Task 3666 (/home/christophe/openpli50/openpli-oe-core/meta-openpli/recipes-multimedia/rtmp/librtmp.bb, do_compile) failed with exit code '1'
The crtxx.o files are well present .
Re: Openpli-5 (still next master) #156
Re: Openpli-5 (still next master) #157
Re: Openpli-5 (still next master) #158
Re: Openpli-5 (still next master) #159
Posted 1 April 2016 - 12:32
GStreamer is compiling with gobject-introspection.( i building with openembedded-core, meta-openembedded en bitbake against git master head).
You can try
--disable-introspection
in gstreamer-plugins.inc and gstreamer.bb
Dreambox dm920, Uclan Ustym4Kpro, Gigablue UHD TRIO 4K and Dreambox dm8000. Wavefrontier T55 13.0|19.2|23.5|28.2 + Ziggo.
Re: Openpli-5 (still next master) #160
3 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
-
Bing (2)