172 replies to this topic

[MastaG]

Please reflash your receiver since a software update will most likely fail.

Especially on spark/spark7162.

Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:

  * The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.

  * Libsoup has been updated so I've dropped the revert for the old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.

- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.

  * This should give us a few more MBs to work with (Dreambox *cough*).

- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.

  * Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.

  * Enable of the zram module.

  * Shipping his wifi drivers.

  * VFD time is now synced every 5 minutes using a cron job.

  * Software update and plugin-installation has been fixed.

  * Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:

  * A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.

- Libsoup has been updated to 2.52 (from master-next).

- Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the mt7600 anymore, the correct driver should hopefully be loaded when you plugin your wifi stick.

 

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
  Using the same patches as openpli-oe-core gst-1 with only these changes:
  Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
  because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.

- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
  These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
  added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype  =  dreambox' for oscam dvbapi.
  Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
  This is a hardware/driver limitation.
  Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
  This causes button presses to register multiple times instead of just once.
  As a workaround you can adjust the key interval:
  Go to: Menu - System - Input devices - dreambox remote control (native).
  Set "Change repeat and delay settings" to yes
  Set "Interval between keys when repeating:" to 200ms or 300ms.
  Press green button (OK)
  Now set the same delay for: "dreambox advanced remote control (native)" as well.

 

TODO:

- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.

- Linux 2.6.18: Look into the v4l usb drivers.

- Add Spark specific plugins by gorski.

- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.

 

Download:

https://mega.nz/#F!z...ILooVVyTRve-soQ

 

Happy testing everyone!

Edited by MastaG, 6 January 2016 - 15:39.

[mm40]

MastaG thank you very much.

[athoik]

@Mastag

You can apply the following also to enigma2 in order to reduce size.

LDFLAGS += "-Wl,--gc-sections"
CXXFLAGS += "-ffunction-sections -fdata-sections"

Same applies can be applied for other programs (for C use CFLAGS), but reducing the big ones worth..

[MastaG]

Thank you Athoik

I'll add those for sure.

I was already happy with upx so this will reduce it even further.

 

Also for the ones wondering why smbd and nmbd are now running from /tmp/.

Since those binaries couldn't be compressed with upx, I've added a task to manually compress them with bzip2 and replace them by a shell script which will unpack them to /tmp and run them from there.

[auston]

Great MastaG

[Akki]

Thanks MastaG for your new image and ist intensive work.

 

Na short test I had even in your notice image that at the
known test streams, here again, the spinner appears and the box can not be controlled.

#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//live.rpctv.com/rpctv/tm.smil/playlist.m3u8:Test3
#DESCRIPTION Test3
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//xg5tbqm52h1pot9.babahhcdn.com/witch/season1/304680.mp4:Dougnut test
#DESCRIPTION Dougnut test
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//cdn.phoenix.intergi.com/19850/videos/4357110/video-sd.mp4:Test MP4
#DESCRIPTION Test MP4
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//movietrailers.apple.com/movies/sony_pictures/hoteltransylvania2/hoteltransylvania2-tlr2_h480p.mov?#User-Agent=iTunes:trailer
#DESCRIPTION Trailer

Is that a problem of VU + boxes and you can confirm this with you?

 

Greeting Akki

Edited by Akki, 6 January 2016 - 19:32.

[MastaG]

Thanks for the report Akki, I'll test this myself and report back :-)

[fransali]

thx MastaG

[Anzo]

Is it possible to include the Samba client? I can't find it.

[Akki]

Thanks for the report Akki, I'll test this myself and report back :-)

 

Thank you MastaG, am already on your report
tensioned :-)

[sportfootbol]

Thanks MastaG, work fine -DM 800 HD SE..Good luck in your future work...

[gutosie]

 MastaG
Thanks for your new image and ist intensive work.

I found an error

 

 

[Dancia11]

MastaG thank you very much.

My DM800 HD PVR
install enigma2settingsbackup no DNS


manual DNS restart GUI OK



but reboot again no DNS

[MastaG]

@Anzo:

The Samba server should be running right?

You should be able to access your receiver from within your LAN network.

 

@gutosie:

Thanks for reporting, I'll look into it.

 

@Dancia11

So if you manually configure your interface and setup your DNS they'll return to 0.0.0.0 after a reboot?

Also do you have another network device connected? (eg usb wifi stick?)

I'll have to test this myself and try to reproduce it.

 

@Akki

I've tried all streams on my DM800Se and Zgemma H2 and they're all working fine here.

No spinner on any of them:

#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//live.rpctv.com/rpctv/tm.smil/playlist.m3u8:Test3
#DESCRIPTION Test3
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//xg5tbqm52h1pot9.babahhcdn.com/witch/season1/304680.mp4:Dougnut test
#DESCRIPTION Dougnut test
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//cdn.phoenix.intergi.com/19850/videos/4357110/video-sd.mp4:Test MP4
#DESCRIPTION Test MP4
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//movietrailers.apple.com/movies/sony_pictures/hoteltransylvania2/hoteltransylvania2-tlr2_h480p.mov?#User-Agent=iTunes:trailer
#DESCRIPTION Trailer

 

However I don't have a VU+ receiver to test with.

 

I hope Christophecvr is willing to test these streams on his VU+ for me.

I'm using his multibox dvbmediasink with the following configure options for all VU+ receivers:

DVBMEDIASINK_CONFIG = "--with-vuplus --with-wmv --with-pcm --with-eac3 --with-aactranscode"

 

Chris you there?

[gorski]

Feedback re. Alien2 on PowerBoard, MastaG...

[christophecvr]

@Anzo:

The Samba server should be running right?

You should be able to access your receiver from within your LAN network.

 

@gutosie:

Thanks for reporting, I'll look into it.

 

@Dancia11

So if you manually configure your interface and setup your DNS they'll return to 0.0.0.0 after a reboot?

Also do you have another network device connected? (eg usb wifi stick?)

I'll have to test this myself and try to reproduce it.

 

@Akki

I've tried all streams on my DM800Se and Zgemma H2 and they're all working fine here.

No spinner on any of them:

#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//live.rpctv.com/rpctv/tm.smil/playlist.m3u8:Test3
#DESCRIPTION Test3
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//xg5tbqm52h1pot9.babahhcdn.com/witch/season1/304680.mp4:Dougnut test
#DESCRIPTION Dougnut test
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//cdn.phoenix.intergi.com/19850/videos/4357110/video-sd.mp4:Test MP4
#DESCRIPTION Test MP4
#SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//movietrailers.apple.com/movies/sony_pictures/hoteltransylvania2/hoteltransylvania2-tlr2_h480p.mov?#User-Agent=iTunes:trailer
#DESCRIPTION Trailer

However I don't have a VU+ receiver to test with.

 

I hope Christophecvr is willing to test these streams on his VU+ for me.

I'm using his multibox dvbmediasink with the following configure options for all VU+ receivers:

DVBMEDIASINK_CONFIG = "--with-vuplus --with-wmv --with-pcm --with-eac3 --with-aactranscode"

 

Chris you there?

The first three do work perfect on vuduo2 i'm now well running master next. The last I did not test

[christophecvr]

As Info the last enigma2 does not start anymore due to error :

Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 563, in <module>
    Components.Lcd.InitLcd()
  File "/usr/lib/enigma2/python/Components/Lcd.py", line 102, in InitLcd
TypeError: argument of type 'bool' is not iterable

to be shure I reverted enigma2 up to version commit :

76c35c3066c55ec724c307ffdc9a628e3f7d4469

Edited by christophecvr, 7 January 2016 - 15:22.

[gorski]

Dancia, I sorted it out manually and if there is a connection - it is saved and sorted...

 

Not sure how it would work if I only did it via DHCP...

[christophecvr]

Oh Yes I always set off the lcd plugin since that is not working and causes problems for much media on vuduo2.

[Akki]

@MastaG

 

Thank you for your feedback. I Christophers Multibox dvbmediasink used and its GST 171 Recipes, thank you for Christopher.

 

The settings for your identical MastaG not understand it either.

 

@Christopher

 

Could you times the image of MastaG with you test to your Duo2, because the streams. With me
hang all the 4 and the spinner is whether this with you is well.

 

Or is the problen on LCD Plugin? should I uninstall it.

 

Greeting Akki