100 replies to this topic

[3SDoc]

Goedemiddag,

 

Als newbie vandaag een nieuwe Formuler F1 neergezet, hier zojuist de laatste Openpli image opgezet.

 

Na het doorlopen van de standaard vragen krijg ik op alle satellieten beeld, uitgezonderd die via de Canaal Digitaal kaart lopen.

 

Na het een en ander door te lezen, zie ik wel een hoop vragen over het zwart beeld echter dit is met CCcam, ik heb echter de standaard ingebouwde OScam geselecteerd.

 

In de andere topics zie ik dat bij de CCcam sprake is over een zogenaamd CCcam prio bestand, ik neem echter aan dat dit niet geld bij de OScam?

 

Om vergissingen uit te sluiten de kaart nog getest in mijn oude Topfield, daar wel beeld (is originele CD kaart oranje) ook bij de Topfield had ik andere modules.

 

De zogenaamde Aston module en ook nog een Powercam, ook deze ziet de Formuler F1 wel, maar ook hier geen beeld :-(

 

Wat doet deze newbie nu fout?

 

Graag advies, mijn vrouwtje zit al hevig te mopperen op mij ;-)

 

Groeten 3S.

 

 

[Pedro_Newbie]

Hoe zit je smartcard in de Formuler, draai hem eens om, misschien zit de chip aan de verkeerde kant (boven/onder)

[3SDoc]

Volgens diverse topics zou de chip aan de boven/achterkant dienen te zitten, en dat zit die :-)

 

Maar zal hem eens omdraaien

 

Nee werkt ook niet

[Erik Slagter]

Weet je zeker dat een decryptie-probleem is, heb je wel ontvangst, weet je dat heel zeker?

[3SDoc]

De ontvangst is in orde, heb na het flashen van de box de gewone installatie gevolgd.

Heb de zenderlijsten van de Astra1, 2 en 3 laten inladen.

 

Via Astra 1 en 2 en 3 zie ik de gewone FTA zenders, in de cd lijst kan ik ook gewoon naar BVN kijken dus dat is geen probleem

 

Zap ik echter naar NPO1 of een van de andere kananlen dan krijg ik zwart beeld.

 

Nu zat ik net in een andere topic te lezen (welke ook over Formuler F1 ging) http://forums.openpl...f1/?hl=formuler

 

dat de kaart met de chip naar beneden moet?

 

Ik heb nogthans begrepen naar boven en aan de achterkant.

 

Via de CI (powercam pro) ook nog gekeken die ziet dat het een CD kaart is en dat het abo loopt tot 2-3-2016 en actief is.

[Erik Slagter]

De ontvangst is in orde, heb na het flashen van de box de gewone installatie gevolgd.
Heb de zenderlijsten van de Astra1, 2 en 3 laten inladen.
Via Astra 1 en 2 en 3 zie ik de gewone FTA zenders, in de cd lijst kan ik ook gewoon naar BVN kijken dus dat is geen probleem

Dat is nog steeds absoluut geen garantie. Of je "LOCK" hebt op de transponder, daar gaat het om. Dat is niet zo heel simpel te zien, maar als dat het geval is, dan zie je in de skin (eventueel een keer extra op OK drukken voor de second infobar) een SNR waarde van aanmerkelijk meer dan "0" (procent of dB, dat maakt niet uit). Als het 0 is, dan heb je geen ontvangst.

[3SDoc]

@ Erik,

 

In de 2e infobar staat dat het om de 1e tuner gaat, en de waarde in dB is rond 15, nog wat.

 

Via menu instellingen ook de signaal bekeken en er staat dat er een lock is. zie plaatje  https://dl.dropboxus...88/IMAG0175.jpg

[Autodelta]

Toets een op de blauwe toets en ga naar Softcam Setup.

Bij Select Softcam staat data CCcam of een andere softcam geselecteerd.

 

Deze werd pas op blank gezet na een update.

[3SDoc]

Blauwe toets ingedrukt levert hier het scherm Kies een plugin aub...

daarna de keus

 

1 PPanels

2 Softcam instellingen

rood Zappen in Pip

en blauw Activeer Picture 

 

kies ik optie 2 Softcam instellingen

 

dan staat er aangegeven: Kies Softcam   Daarachter staat vermeld oscam

 

daaronder de regel Softcam herstarten.

 

Zoals vermeld ik start topic is dit een nieuw apparaat, waarop ik vandaag voor het eerst openpli op hebt geflasht.

Vervolgens alle standaard instellingen doorlopen.

 

Apparaat start prima op,  fta zenders op de diverse satellieten zijn geen probleem, maar zodra ik zenders selecteer uit de CD lijst dan heb ik geen beeld.

 

Ook de SD lijst geeft bv ook de CD info en TVV info kanalen gewoon weer, dus de ontvangst lijkt me in orde.

 

Toch gaat er hier iets niet goed.

 

Gelukkig ook een 3e tuner mee besteld (kabel) deze er nu ook maar ingeprikt en gelukkig deze doet het, dus mijn vrouw kan gelukkig de gewone zenders zien.

 

Maar goed daar heb ik geen schotel voor op het dak staan uiteraard. :-)

[WanWizard]

De standaard Oscam config verwacht de kaart in de juiste reader, wellicht zit de kaart in het verkeerde slot?

[3SDoc]

Wist niet dat dit wat uitmaakte, maar de kaart zit in het bovenste sleufje.
Zal het morgen anders eens in de andere stoppen.

[3SDoc]

nu de kaart op verschillende manieren in de 2 sloten gehad, chip omhoog chip omlaag, het bovenste slot, het 2e slot, geen enkele verandering.

 

Ben even het spoor bijster en heb geen idee wat ik nu moet/kan doen.

[WanWizard]

Even via de Oscam webif kijken of deze uberhaupt wel draait, en zo ja, wat deze wel of niet ziet.

[3SDoc]

moest eerst even weten wat Oscam webif nu weer was  kende wel open webif

 

maar goed ik ken dit natuurlijk niet zo dus misschien dat je kunt aangeven wat je wilt zien?

 

heb een screenshot hier staan, ik zie hier zelf dat de bovenste kaartreader een fout geeft   https://dl.dropboxus...04 14.30.24.png

 

In het live log zie ik een error melding over ATR staan geloof ik 

 

1970/01/01 01:00:16 00000000 s     (main) Host name      = formuler1

1970/01/01 01:00:16 00000000 s     (main) Release        = 4.0.1

1970/01/01 01:00:16 00000000 s     (main) Version        = #1 SMP Thu Oct 1 03:12:39 CEST 2015

1970/01/01 01:00:16 00000000 s     (main) Machine        = mips

1970/01/01 01:00:16 00000000 s     (main) Stb model      = dm800se

1970/01/01 01:00:16 00000000 s     (main) Stb boxtype    = formuler1

1970/01/01 01:00:16 00000000 s     (main) The current system time is smaller than the build date (Dec 27 2015). Waiting up to 60 seconds for time to correct

2016/01/04 14:26:56 00000000 s     (main) creating pidfile /tmp/oscam.pid with pid 462

2016/01/04 14:26:56 00000000 s   (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2016/01/04 14:26:56 00000000 s     (main) signal handling initialized

2016/01/04 14:26:56 00000000 s   (config) 10 provid's loaded

2016/01/04 14:26:56 00000000 s   (config) 164 service-id's loaded in 3 ms

2016/01/04 14:26:56 00000000 s      (net) cs378x: initialized (fd=3, port=12005)

2016/01/04 14:26:57 00000000 s   (reader) lower_card [internal] creating thread for device /dev/sci0

2016/01/04 14:26:57 00000000 s   (reader) upper_card [internal] creating thread for device /dev/sci1

2016/01/04 14:26:57 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2016/01/04 14:26:57 00000000 s     (main) waiting for local card init

2016/01/04 14:26:57 5057D9D4 r   (reader) upper_card [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2016/01/04 14:26:57 5057D9D4 r   (reader) upper_card [internal] Reader sci internal, detected box type: formuler1

2016/01/04 14:26:57 50010BDB r   (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2016/01/04 14:26:57 50010BDB r   (reader) lower_card [internal] Reader sci internal, detected box type: formuler1

2016/01/04 14:26:57 16F68E6D h    (webif) webif: decompressed 165919 bytes back into 395200 bytes

2016/01/04 14:26:57 16F68E6D h    (webif) HTTP Server running. ip=0.0.0.0 port=8081

2016/01/04 14:26:58 5057D9D4 r   (reader) upper_card [internal] card detected

2016/01/04 14:26:59 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:26:59 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:26:59 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 1/7  fs = 9

2016/01/04 14:27:00 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:00 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:00 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 2/7  fs = 8

2016/01/04 14:27:01 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:01 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:01 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 3/7  fs = 7

2016/01/04 14:27:03 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:03 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:03 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 4/7  fs = 6

2016/01/04 14:27:04 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:04 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:04 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 5/7  fs = 5

2016/01/04 14:27:05 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:05 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:05 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 6/7  fs = 4

2016/01/04 14:27:06 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:06 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:06 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 7/7  fs = 3

2016/01/04 14:27:06 5057D9D4 r   (reader) upper_card [internal] Error activating card.

2016/01/04 14:27:08 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:08 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:08 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 1/7  fs = 9

2016/01/04 14:27:09 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:09 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:09 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 2/7  fs = 8

2016/01/04 14:27:11 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:11 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:11 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 3/7  fs = 7

2016/01/04 14:27:12 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:12 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:12 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 4/7  fs = 6

2016/01/04 14:27:13 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:13 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:13 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 5/7  fs = 5

2016/01/04 14:27:14 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:14 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:14 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 6/7  fs = 4

2016/01/04 14:27:16 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:16 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:16 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 7/7  fs = 3

2016/01/04 14:27:16 5057D9D4 r   (reader) upper_card [internal] Error activating card.

2016/01/04 14:27:17 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:17 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:17 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 1/7  fs = 9

2016/01/04 14:27:19 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:19 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:19 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 2/7  fs = 8

2016/01/04 14:27:20 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:20 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:20 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 3/7  fs = 7

2016/01/04 14:27:21 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:21 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:21 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 4/7  fs = 6

2016/01/04 14:27:22 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:22 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:22 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 5/7  fs = 5

2016/01/04 14:27:24 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:24 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:24 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 6/7  fs = 4

2016/01/04 14:27:25 5057D9D4 r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:27:25 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:27:25 5057D9D4 r   (reader) upper_card [internal] Read ATR fail, attempt 7/7  fs = 3

2016/01/04 14:27:25 5057D9D4 r   (reader) upper_card [internal] Error activating card.

2016/01/04 14:27:25 5057D9D4 r   (reader) upper_card [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2016/01/04 14:27:25 5057D9D4 r   (reader) upper_card [internal] card initializing error

2016/01/04 14:27:26 00000000 s     (main) init for all local cards done

2016/01/04 14:27:26 00000000 s (anticasc) anti cascading disabled

2016/01/04 14:27:26 13DDDB2F c   (client) plain dvbapi-client granted (dvbapiau, au=auto (4 reader))

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) PMT6 CA PMT Server connected on fd 15!

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0711 PROVID: 00006A 

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1818 ECM_PID: 0725 PROVID: 00006C 

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 1819 ECM_PID: 0739 PROVID: 00006D 

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 0207 length: 75)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0711 PROVID: 00006A PBM: FFE000000000000 DATE: 4-1-2016

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 0725 PROVID: 00006C PBM: FFE000000000000 DATE: 4-1-2016

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 0100 ECM_PID: 0739 PROVID: 00006D PBM: FFE000000000000 DATE: 4-1-2016

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 0C39 PROVID: 051900 

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0063 length: 75)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0028 length: 0)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0032 length: 0)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 found 7 ECMpids and 4 STREAMpids in caPMT

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 serving srvid 5225 (1817@00006A:5225 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0AA9

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 0207 length: 74)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0063 length: 87)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0028 length: 7)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0032 length: 5)

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 found 7 ECMpids and 4 STREAMpids in PMT

2016/01/04 14:27:26 13DDDB2F c   (dvbapi) Demuxer 0 serving srvid 5225 (1817@00006A:5225 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0AA9

2016/01/04 14:27:30 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:06 16F68E6D h        (-) -- Skipped 7 duplicated log lines --

2016/01/04 14:28:06 16F68E6D h    (webif) Reader upper_card restarted by WebIF from 192.168.1.9

2016/01/04 14:28:07 5057D9D4 r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:07 5057D9D4 r   (reader) upper_card [internal] creating thread for device /dev/sci1

2016/01/04 14:28:07 3BF1F76E r   (reader) upper_card [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2016/01/04 14:28:07 3BF1F76E r   (reader) upper_card [internal] Reader sci internal, detected box type: formuler1

2016/01/04 14:28:08 3BF1F76E r   (reader) upper_card [internal] card detected

2016/01/04 14:28:09 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:09 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:09 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 1/7  fs = 9

2016/01/04 14:28:10 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:10 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:10 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:10 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 2/7  fs = 8

2016/01/04 14:28:11 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:11 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:11 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 3/7  fs = 7

2016/01/04 14:28:13 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:13 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:13 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 4/7  fs = 6

2016/01/04 14:28:14 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:14 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:14 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 5/7  fs = 5

2016/01/04 14:28:15 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:15 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:15 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:15 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 6/7  fs = 4

2016/01/04 14:28:16 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:16 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:16 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 7/7  fs = 3

2016/01/04 14:28:16 3BF1F76E r   (reader) upper_card [internal] Error activating card.

2016/01/04 14:28:18 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:18 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:18 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 1/7  fs = 9

2016/01/04 14:28:19 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:19 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:19 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 2/7  fs = 8

2016/01/04 14:28:20 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:21 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:21 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:21 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 3/7  fs = 7

2016/01/04 14:28:22 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:22 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:22 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 4/7  fs = 6

2016/01/04 14:28:23 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:23 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:23 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 5/7  fs = 5

2016/01/04 14:28:24 16F68E6D h    (webif) Reader lower_card restarted by WebIF from 192.168.1.9

2016/01/04 14:28:24 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:24 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:24 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 6/7  fs = 4

2016/01/04 14:28:25 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:25 50010BDB r   (reader) lower_card [internal] Deactivating card

2016/01/04 14:28:25 50010BDB r   (reader) lower_card [internal] creating thread for device /dev/sci0

2016/01/04 14:28:25 3B33A332 r   (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2016/01/04 14:28:25 3B33A332 r   (reader) lower_card [internal] Reader sci internal, detected box type: formuler1

2016/01/04 14:28:26 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:26 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:26 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 7/7  fs = 3

2016/01/04 14:28:26 3BF1F76E r   (reader) upper_card [internal] Error activating card.

2016/01/04 14:28:27 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:27 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:27 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 1/7  fs = 9

2016/01/04 14:28:29 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:29 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:29 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 2/7  fs = 8

2016/01/04 14:28:30 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:30 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:30 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:30 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 3/7  fs = 7

2016/01/04 14:28:31 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:31 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:31 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 4/7  fs = 6

2016/01/04 14:28:32 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:32 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:32 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 5/7  fs = 5

2016/01/04 14:28:34 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:34 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:34 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 6/7  fs = 4

2016/01/04 14:28:35 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:35 3BF1F76E r   (reader) upper_card [internal] ERROR: no characters found in ATR!

2016/01/04 14:28:35 3BF1F76E r   (reader) upper_card [internal] Deactivating card

2016/01/04 14:28:35 3BF1F76E r   (reader) upper_card [internal] Read ATR fail, attempt 7/7  fs = 3

2016/01/04 14:28:35 3BF1F76E r   (reader) upper_card [internal] Error activating card.

2016/01/04 14:28:35 3BF1F76E r   (reader) upper_card [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2016/01/04 14:28:35 3BF1F76E r   (reader) upper_card [internal] card initializing error

2016/01/04 14:28:39 16F68E6D h    (webif) Reader lower_card restarted by WebIF from 192.168.1.9

2016/01/04 14:28:40 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:28:40 3B33A332 r   (reader) lower_card [internal] Deactivating card

2016/01/04 14:28:40 3B33A332 r   (reader) lower_card [internal] creating thread for device /dev/sci0

2016/01/04 14:28:40 17F1EAEC r   (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2016/01/04 14:28:40 17F1EAEC r   (reader) lower_card [internal] Reader sci internal, detected box type: formuler1

2016/01/04 14:28:45 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:29:10 13DDDB2F c        (-) -- Skipped 4 duplicated log lines --

2016/01/04 14:29:21 16F68E6D h        (-) -- Skipped 3 duplicated log lines --

2016/01/04 14:29:21 16F68E6D h    (webif) Reader lower_card restarted by WebIF from 192.168.1.9

2016/01/04 14:29:22 17F1EAEC r   (reader) lower_card [internal] Deactivating card

2016/01/04 14:29:22 17F1EAEC r   (reader) lower_card [internal] creating thread for device /dev/sci0

2016/01/04 14:29:22 4CF5E406 r   (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2016/01/04 14:29:22 4CF5E406 r   (reader) lower_card [internal] Reader sci internal, detected box type: formuler1

2016/01/04 14:29:25 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:29:42 13DDDB2F c        (-) -- Skipped 3 duplicated log lines --

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stop descrambling program number 5225 (1817@00006A:5225 unknown)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0716 PROVID: 00006A 

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1818 ECM_PID: 0729 PROVID: 00006C 

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 1819 ECM_PID: 0758 PROVID: 00006D 

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 020d length: 75)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0716 PROVID: 00006A PBM: FFE000000000000 DATE: 4-1-2016

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 0729 PROVID: 00006C PBM: FFE000000000000 DATE: 4-1-2016

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 0100 ECM_PID: 0758 PROVID: 00006D PBM: FFE000000000000 DATE: 4-1-2016

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 0C3D PROVID: 051900 

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0069 length: 75)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 002b length: 0)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0033 length: 0)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 found 7 ECMpids and 4 STREAMpids in caPMT

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 serving srvid 17C0 (1817@00006A:17C0 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 09B0

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 020d length: 74)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0069 length: 87)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 002b length: 7)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0033 length: 5)

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 found 7 ECMpids and 4 STREAMpids in PMT

2016/01/04 14:29:42 13DDDB2F c   (dvbapi) Demuxer 0 serving srvid 17C0 (1817@00006A:17C0 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 09B0

2016/01/04 14:29:46 13DDDB2F c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2016/01/04 14:30:47 13DDDB2F c        (-) -- Skipped 11 duplicated log lines --

2016/01/04 14:31:47 13DDDB2F c        (-) -- Skipped 12 duplicated log lines --

2016/01/04 14:32:47 13DDDB2F c        (-) -- Skipped 12 duplicated log lines --

 

 

Onder het kopje FILES de Oscam version

 

Unix starttime: 1451914016

Starttime:      04.01.2016 14:26:56

Version:        oscam-1.20-unstable_svn-r11202

Compiler:       mipsel-oe-linux

Box type:       formuler1 (generic)

PID:            460

TempDir:        /tmp/.oscam

ConfigDir:      /etc/tuxbox/config/oscam/

WebifPort:      8081

 

Web interface support:                   yes

LiveLog support:                         yes

jQuery support intern:                   yes

Touch interface support:                 yes

SSL support:                             yes

DVB API support:                         yes

DVB API with AZBOX support:              no

DVB API with MCA support:                no

DVB API with COOLAPI support:            no

DVB API with COOLAPI2 support:           no

DVB API with STAPI support:              no

DVB API with STAPI5 support:             no

DVB API read-sdt charsets:               yes

Irdeto guessing:                         yes

Anti-cascading support:                  yes

Debug mode:                              yes

Monitor:                                 yes

Loadbalancing support:                   yes

Cache exchange support:                  yes

CW Cycle Check support:                  yes

LCD support:                             no

LED support:                             no

Clockfix with realtime clock:            yes

IPv6 support:                            no

 

camd 3.3x:                               no

camd 3.5 UDP:                            yes

camd 3.5 TCP:                            yes

newcamd:                                 yes

CCcam:                                   yes

CCcam share:                             yes

gbox:                                    yes

radegast:                                yes

scam:                                    yes

serial:                                  yes

constant CW:                             yes

Pandora:                                 yes

ghttp:                                   yes

 

Reader support:                          yes

 

Nagra:                                   yes

Irdeto:                                  yes

Conax:                                   yes

Cryptoworks:                             yes

Seca:                                    yes

Viaccess:                                yes

NDS Videoguard:                          yes

DRE Crypt:                               yes

TONGFANG:                                yes

Bulcrypt:                                yes

Griffin:                                 yes

DGCrypt:                                 yes

 

cardreader_phoenix:                      yes

cardreader_internal_azbox:               no

cardreader_internal_coolapi:             no

cardreader_internal_coolapi2:            no

cardreader_internal_sci:                 yes

cardreader_sc8in1:                       yes

cardreader_mp35:                         yes

cardreader_smargo:                       yes

cardreader_pcsc:                         no

cardreader_smartreader:                  yes

cardreader_db2com:                       yes

cardreader_stapi:                        no

cardreader_stapi5:                       no

cardreader_stinger:                      yes

 

 

Oscam.config

 

[global]

disablelog = 1

disableuserfile = 1

usrfileflag = 0

maxlogsize = 10

preferlocalcards = 1

saveinithistory = 1

lb_mode = 0

unlock_parental = 1

 

[cs378x]

port                          = 12005

 

[webif]

httpport = 8081

httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

 

[dvbapi]

enabled = 1

pmt_mode = 6

au = 1

user = dvbapiau

boxtype = dreambox

 

oscam.user

 

[account]

user = dvbapiau

pwd =

disabled = 0

group = 1

au = 1

 

[account]

user                          = slaapkamer

pwd                           = slaapkamer

group                         = 1

 

 

oscam.server

 

[reader]

label                         = lower_card

enable                        = 1

protocol                      = internal

device                        = /dev/sci0

detect                        = cd

group                         = 1

emmcache                      = 1,3,15

audisabled                    = 0

mhz                           = 357

cardmhz                       = 2700

ratelimitecm                  = 4

ratelimittime                 = 9000

ecmunique                     = 1

srvidholdtime                 = 2000

cooldown                      = 30,600

 

 

[reader]

label                         = upper_card

enable                        = 1

protocol                      = internal

device                        = /dev/sci1

detect                        = cd

group                         = 1

emmcache                      = 1,3,15

audisabled                    = 0

mhz                           = 357

cardmhz                       = 2700

ratelimitecm                  = 4

ratelimittime                 = 9000

ecmunique                     = 1

srvidholdtime                 = 2000

cooldown                      = 30,600

 

 

[reader]

label                         = Hoofdbox

enable      = 0

protocol                      = cs378x

device                        = ip_adress_hoofdbox,12005

user                          = slaapkamer

password                      = slaapkamer

group                         = 1

 

 

[reader]

label                         = CCcam-server

enable                        = 0

protocol                      = cccam

device                        = ip_adress_server,12001

user                          = user

password                      = password

group                         = 1

cccversion                    = 2.3.0

cccmaxhops                    = 2

ccckeepalive                  = 1

audisabled                    = 1

 

 

Mocht je nog meer willen zien dan hoor ik het wel?

 

 

 

 

[goldeneye]

Boxtype = FormulerF1 bij ene setting, bij andere setting plots Boxtype = dreambox

mhz = 600 voor CDS kaarten

cardmhz = 2700 is voor dreambox interne kaartlezer (of de FormulerF1 dezelfde snelheid heeft??)

 

In elk geval zit de fout in het feit dat de ATR niet gelezen wordt.. Dat is A: heel erg verkeerde clockwaarde of B: kaart zit er verkeerd om in..

[3SDoc]

De settings komen uit de Openpli flash van vandaag, dus ik ga er vanuit dat daar dan iets niet in orde staat

 

Heb namelijk de gewone installatie door lopen en zelf nergens iets aan waardes veranderd, zou zo ook niet 1 2 3 weten hoe ik dit kan veranderen

[Tech]

De oscam config is voor alle receivers gelijk, ik heb zelf ooit getest met een f1 dus ben eigenlijk zeker dat dit correct moet zijn.
Je kunt meekijken via de webinterface van oscam, die is de bereiken via poort 8081, op je pc start je de browser en geef het ip adrrs van je box in gevolgd door :8081
Dus

http://ip-box:8081

[zeeteefje]

De kaart wordt niet gelezen, dus meekijken via de webinterface en dan de kaart omdraaien. Als het resultaat toch hetzelfde is "ERROR: no characters found in ATR!", dan is er iets mis. Een kaartlezer kan zich ook 'ophangen' , eventueel even de spanning er af halen en opnieuw opstarten.

[3SDoc]

Wat ik ook al gedaan had, diverse malen spanning er ook af. Heb opnieuw de laatste image geflasht en nu eens niet de Oscam gekozen maar de CCcam. Ook hier hetzelfde resultaat.

Lijkt wel een cardreader fout te zijn.

[goldeneye]

Als je zin hebt mag je wel even langskomen. Heb hier alles bij de hand om te testen.... Inclusief een CI "if everything else fails"... Denk meer aan een kaartlezer die flink over zijn huig gegaan is..