67 replies to this topic

[zeros]

I can assure you the previous problem, if DVB-C is selected! Yes, the problem there exist!

I did a test, I changed my average tuner from DVB-T to DVB-C, then restart to my dreambox.

The results:

 

root@dm7020hd:~# cat /proc/bus/nim_sockets

NIM Socket 0:

        Type: DVB-S2

        Name: BCM4505

        Has_Outputs: no

        Frontend_Device: 0

        I2C_Device: 0

NIM Socket 1:

        Type: DVB-C

        Name: CXD1981

        Has_Outputs: yes

        Mode 0: DVB-C

        Mode 1: DVB-T

        Frontend_Device: 1

        I2C_Device: 2

NIM Socket 2:

        Type: DVB-T

        Name: PCTV 290e

        Has_Outputs: no

        Frontend_Device: 2

root@dm7020hd:~#

 

Attached Files

•  Screenshot-problem-with-DVB-C.jpg   48.08KB   1 downloads
•  settings-Nims.1-terrestrial.jpg   253.31KB   1 downloads

[zeros]

I can not currently test with DVB-T2, so maybe this is now OK (post #60 =

[zeros]

I checked and I`m going to try make this change - NimManager-Lines-628-634-need-probably-swap. Soon, I`m reporting the result.

Attached Files

•  NimManager-Lines-628-634-need-probably-swap.jpg   111.43KB   1 downloads

Edited by zeros, 6 February 2016 - 21:45.

[zeros]

I think we need to swap on NimManager.py

 

connectable = {

"DVB-C": ("DVB-C", "DVB-C2"),

"DVB-T": ("DVB-T","DVB-T2"),

"DVB-T2": ("DVB-T", "DVB-T2"),

"DVB-S": ("DVB-S", "DVB-S2"),

"DVB-S2": ("DVB-S", "DVB-S2"),

"ATSC": ("ATSC"),

 

 

return {

"DVB-C": "DVB-C",

"DVB-T": "DVB-T",

"DVB-T2": "DVB-T2",

"DVB-S": "DVB-S",

"DVB-S2": "DVB-S2",

"ATSC": "ATSC",

None: _("empty")

}[self.getType()]

[el bandido]

Are your vtuners or usb tuners changing types at start-up or reboot? If the answer is yes, then you may need to check and see how they are loading using rs232 debug before you pull your hair out or make tons of changes in NimManager.

My RS232 Debug at cold start or reboot :
 

Internal tuners

BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...

vtuners (incorrect)
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)...

vtuners (correct)
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Sundtek ATSC / ClearQAM (0/0))...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Sundtek DVB-S/S2 (IV) (0/0))...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Sundtek DVB-S/S2 (IV) (0/0))...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Sundtek ATSC / ClearQAM (0/0))...

[zeros]

Ignore my post #63, where the sequence is wrong.
Recently, we changed the order here:
types = [type for type in ["DVB-C", "DVB-T", "DVB-T2", "DVB-S", "DVB-S2", "ATSC"] if eDVBResourceManager.getInstance().frontendIsCompatible(slot.frontend_id, type)]
But we are not changed the order in three other places, I think that this should be done.
And also the last current lines, the order must be obviously
DVB-C
DVB-T
DVB-S
And there probably should be also added the ATSC?
if slot.canBeCompatible("DVB-S"):
createSatConfig(nim, x, empty_slots)
empty = False
if slot.canBeCompatible("DVB-C"):
createCableConfig(nim, x)
empty = False
if slot.canBeCompatible("DVB-T"):
createTerrestrialConfig(nim, x)
empty = False
if empty:
empty_slots += 1

[zeros]

I did it, something worse not gone, but it didn´t fix the error, which was described in post #57

Attached Files

•  NimManager.rar   313.57KB   5 downloads

[Dimitrij]

I did it, something worse not gone, but it didn´t fix the error, which was described in post #57

#57

This is not a bug, just slot(tuner) index changed and config name is same "enabled".

		elif slot.isCompatible("DVB-C"):
			nim.configMode = ConfigSelection(
				choices = {
					"enabled": _("enabled"),
					"nothing": _("nothing connected"),
					},
				default = "enabled")
			createCableConfig(nim, x)
		elif slot.isCompatible("DVB-T"):
			nim.configMode = ConfigSelection(
				choices = {
					"enabled": _("enabled"),
					"nothing": _("nothing connected"),
					},

Edited by Dimitrij, 8 February 2016 - 08:34.