11 replies to this topic

[Purè90]

Hi Mates, is any image for Amiko Alien SHD8900 STB including IPTV streamer? Many thanks in advance for your help. Bye

[Taapat]

You're in wrong forum.
Check http://openpli.org/ for supported stb. There is no support for Amiko Alien SHD8900.

[Purè90]

Hi thank you for your answer. Bye

[gorski]

PBNIGMA, OpenATV, OpenSPA, OpenRSI etc.

 

Mixture of OpenPLi and OpenViX (OE-A)...

[oxejatte]

Hi i don't know if i can post a link to external forum, by the way you can google "OpenPLi-4 / Gstreamer 1.7.1 - STI7111"

 

Tested ok with iptv streams on my GM990 (Amiko Alien 1)

 

Here are the specs :

 

OpenPLi-4 / Gstreamer 1.7.1 (master git) images 2016-01-05
Please reflash your receiver since a software update will most likely fail.
Especially on spark/spark7162.

Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:
* The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.
* Libsoup has been updated so I've dropped the revert for the old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.
- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.
* This should give us a few more MBs to work with (Dreambox *cough*).
- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.
* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.
* Enable of the zram module.
* Shipping his wifi drivers.
* VFD time is now synced every 5 minutes using a cron job.
* Software update and plugin-installation has been fixed.
* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:
* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.
- Libsoup has been updated to 2.52 (from master-next).
- Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the
mt7600 anymore, the correct driver should hopefully be loaded when you
plugin your wifi stick.


Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

TODO:
- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink
driver to load on startup (eg. rt3070, rt55xx, mt7600), since they
cannot be loaded at the same time.

- Linux 2.6.18: Look into the v4l usb drivers.
- Add Spark specific plugins by gorski.
- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.

[WanWizard]

As long as you realize that something downloaded from another site than http://openpli.org is NOT an OpenPLi image, but someone who used our sources as a starting point for something else, and illegally used our name!

 

So don't come here to ask questions or ask for support...

[Taapat]

This is a quote from this forum: http://forums.openpl...ges-2016-01-05/
MastaG never told that this is a images of OpenPLi team.
Just people do not understand what it means "compiled from" or "based on".
They see the word "openpli" and immediately write in this forum. 

Edited by Taapat, 19 January 2016 - 14:11.

[WanWizard]

I didn't say (or even imply) that. I'm only responding to the posted specs, which clearly open with the fact it's an OpenPLi-4 image.

 

I don't know where those came from, but they should indeed read "MastaG image, based on OpenPLi-4 ...".

[oxejatte]

Sorry my apologize.
I didn't want to post this first time, just wanted to point someone to where he could find help

[Purè90]

Hi Mates, 

sorry for the discussion started in the wrong place or Forum I think.

 

I installed in the STB Amiko Alien SHD8900 one MastaG image (STI7111) downloaded from the link in the following post of this Forum indicated by one of you:

 

http://forums.openpl...ges-2016-01-05/

 

It is perfect, as always! The only thing is that from the feed it is possible to install only a softcam: oscam, that I do not know. Could you please indicate me a way or/and a file .ipk to install CCCam (2.21 or 2.30 version) manually or to insert them in the feed so that everybody can install it with the Green Button? 

Many and many thanks for all your support and help.

Bye

[MastaG]

Well, the meta-openpli recipes are not sh4-oriented since there's no support for sh4 receivers.

So it's best you fetch a nice ipk for CCcam ipk from somewhere else.

Or just setup oscam with dvbapi and a cccam-reader

[Purè90]

Hi Mastag,

I'll follow your suggestion.

Thanks and Bye