14 replies to this topic

[acandido]

Hi, I realize support for the wetek box is very new, but just wondering if the following packages will make their way to the feeds:

 

- kernel-module-dvb-usb-gp8psk

- enigma2-plugin-softcams-cccam

 

Thanks

[WanWizard]

cccam is impossible, that is a MIPSEL-only binary, and the WeTek has an ARM processor. The other one is only possible if all source is available, and that source is compatible with the platform.

[Erik Slagter]

If the kernel that the WeTek uses has support for this device, you might ask the manufacturer to enable it in the kernel config.

[WeTek]

Hello, 

 

https://github.com/w...sb/Makefile#L12

 

There is support in Kernel for kernel-module-dvb-usb-gp8psk , we can turn it on

[Erik Slagter]

Just update the BSP then

[acandido]

It looks like the kernel module for gp8psk is now installable, but enigma2 does not recognize it as a tuner:

[    5.184608@0] usb 2-1: New USB device found, idVendor=09c0, idProduct=0203
[    5.185863@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.193140@0] usb 2-1: Product: Genpix SkyWalker-1
[    5.197928@0] usb 2-1: Manufacturer: Genpix Electronics

[    5.039571@1] wetek-dvb dvb.8: Found Wetek i2c-1 adapter ...
[    5.041637@1] wetek-dvb dvb.8: Found Wetek i2c-2 adapter ...
[    5.047296@1] wetek-dvb dvb.8: ts0: parallel
[    5.051645@1] wetek-dvb dvb.8: ts2: parallel
[    5.884121@1] wetek-dvb dvb.8: Wetek NIM(s) detection in progress ...
[    5.884924@1] wetek-dvb dvb.8: Checking for Sony CXD2837 DVB-C/T/T2 demod ...
[    5.955240@1] wetek-dvb dvb.8: Checking for Panasonic MN88436 ATSC demod ...
[    5.976331@1] wetek-dvb dvb.8: Total Wetek NIM(s) found: 1
[    9.564221@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Panasonic MN88436)...

Module                  Size  Used by
dvb_usb_gp8psk          9004  1 
dvb_usb                14955  1 dvb_usb_gp8psk
sysfillrect             3143  0 
syscopyarea             2789  0 
rfcomm                 30010  0 
mceusb                 11994  0 
rc_core                10827  2 dvb_usb,mceusb
mali                  164059  0 
hidp                   11772  0 
bluetooth             193611  4 hidp,rfcomm
e2_procfs              27543  0 
dhd                   603783  0 
wetekdvb              181703  1 e2_procfs

Edited by acandido, 8 February 2016 - 19:58.

[athoik]

Please post full dmesg (sometimes there are errors in dmesg eg missing demodulator).

[acandido]

Sure, here's the full dmesg

[pop_eye]

[    8.757410@0] wetekdvb: module license 'Proprietary' taints kernel.
[    8.758075@0] Disabling lock debugging due to kernel taint
[    9.004159@0] DVB: registering new adapter (wetek)
[    9.004261@0] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Panasonic MN88436)...
...
[   14.321013@1] dvb-usb: found a 'Genpix SkyWalker-1 DVB-S receiver' in warm state.
[   15.386819@0] gp8psk: FW Version = 2.15.3 (0x20f03)  Build 2011/04/18
[   15.388846@0] gp8psk: FPGA Version = 1
[   15.392058@0] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   15.401089@0] DVB: registering new adapter (Genpix SkyWalker-1 DVB-S receiver)
[   15.436075@0] usb 2-1: DVB: registering adapter 1 frontend 0 (Genpix DVB-S)...
[   15.445319@0] dvb-usb: Genpix SkyWalker-1 DVB-S receiver successfully initialized and connected.
[   15.449190@0] gp8psk: found Genpix USB device pID = 203 (hex)
[   15.466153@0] usbcore: registered new interface driver dvb_usb_gp8psk

It does not seem to register vtuner interface. Does wetek support usb dvb -> vtuner pooling ?

Edited by pop_eye, 9 February 2016 - 02:35.

[Erik Slagter]

Maybe it doesn't have vtuner support in their drivers...

[acandido]

So I assume this is something that has to be taken care of on the Wetek side of things and not in OpenPLi?

[ETNiES]

Didn't want to make a new topic for this, 

 

is it possible to pause live tv on the openpli image?  i've read permanenttimeshift plugin makes this possible, but it doesn't install

[WanWizard]

Yes, just press the pause button. You don't need to install anything, timeshift is built-in. You do need to device to record to (disk, stick), and you do need to configure the timeshift path.

[Meega]

And also configure it automatic.
In the system settings.

[ETNiES]

 

 

Thanks