Jump to content


Photo

How to read Viasatcard on VU+SOLO2

usb Oscam PLi

  • Please log in to reply
5 replies to this topic

#1 Idefixer

  • Member
  • 23 posts

0
Neutral

Posted 4 February 2016 - 19:20

I have Vu+Solo2 and PLi.

I have downloaded Oscam through Menue on box and configured the files of Oscam.

 

I have got the box to read a Canaldigital-card, CAID 0B00, in one of the internal readers. No problems!

But when I try to read a Viasatvard, CAID 090F, It does not work.

 

The log sais following:

 

(reader) upper_card_Viasat [internal] card detected

(reader) upper_card_Viasat [internal] ATR: 00 00

(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention

(reader) upper_card_Viasat [internal] Error activating card.

(reader) upper_card_Viasat [internal] ATR: 00 00

(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention

(reader) upper_card_Viasat [internal] Error activating card.

(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

(reader) upper_card_Viasat [internal] ATR: 00 00

(reader) upper_card_Viasat [internal] ERROR: Could not read reader->convention

reader) upper_card_Viasat [internal] Error activating card.

(reader) upper_card_Viasat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

reader) upper_card_Viasat [internal] card initializing error

 

 

 

 

The Readersection in Oscam.user looks like this:

 

[reader]
label                         = upper_card_Viasat
enable                        = 0
protocol                      = internal
device                        = /dev/sci1
caid                          = 090F
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,3,15,0
blockemm-unknown              = 1
dropbadcws                    = 1
ratelimitecm                  = 4
ratelimittime                 = 9000
ecmunique                     = 1
srvidholdtime                 = 2000
cooldown                      = 30,600

 

 

I have tried to set both mhz and cardmhz to 357 and also deleted them totally, but no progress.

 

So either the VU+Solo can't read Viasatcards or I am doing something wrong.

 

How about a external reader connected to USB.

 

Should the protocol be "smargo"?

What number has the USB on the front? /dev/ttyUSB0 ?

 

Do I have to install some driver for the USB-reader?

 

 

 

 



Re: How to read Viasatcard on VU+SOLO2 #2 Blacksimon

  • Senior Member
  • 51 posts

0
Neutral

Posted 4 February 2016 - 19:58

Hi Idefixer,

enable = 1 ??

 

 

try this:

 

[reader]
label                         = upper_card_Viasat
enable                        = 1
protocol                      = internal
device                        = /dev/sci1
caid                          = 090F

detect                        = cd
mhz                           = 600
cardmhz                       = 500
group                         = 1
emmcache                  = 1,3,2


Edited by Blacksimon, 4 February 2016 - 20:02.

Zgemma H7S Openpli 6.0 R.C.
Zgemma H2.H OpenPli 6.0 R.C.

Zgemma H2 OpenPli 4


Re: How to read Viasatcard on VU+SOLO2 #3 Idefixer

  • Member
  • 23 posts

0
Neutral

Posted 4 February 2016 - 21:02

Hi Blacksimon.

 

I will try that.

 

Have You own experiance from Viasat-cards and Vu+Solo2 ?

 

I know that dreamboxes has reputation to burn Viasat-cards but I have not heard anything about Vu+Solo2.

 

Best regards



Re: How to read Viasatcard on VU+SOLO2 #4 stefansat

  • Member
  • 3 posts

+1
Neutral

Posted 5 February 2016 - 12:18

Hi Idefixer,

enable = 1 ??

 

 

try this:

 

[reader]
label                         = upper_card_Viasat
enable                        = 1
protocol                      = internal
device                        = /dev/sci1
caid                          = 090F

detect                        = cd
mhz                           = 600
cardmhz                       = 500
group                         = 1
emmcache                  = 1,3,2

By vu+solo2 there is only one speed avbl for internal reader an that's 450.

 

Just go to website :

 

http://www.streamboa.../wbb2/index.php

 

Shure someone can help You there.



Re: How to read Viasatcard on VU+SOLO2 #5 Idefixer

  • Member
  • 23 posts

0
Neutral

Posted 5 February 2016 - 13:55

OK, Thanks Stefansat.

 

So regardless what settings in Oscam.server, the internal reader will only use 450 ?

 

Good to know

 

Brg

Idefixer



Re: How to read Viasatcard on VU+SOLO2 #6 Idefixer

  • Member
  • 23 posts

0
Neutral

Posted 7 February 2016 - 12:00

This is what I have got sofare...

 

Still no picture :-(

 

Oscam.server

[reader]
label                         = upper_card_Viasat
enable                        = 0
protocol                      = internal
device                        = /dev/sci1
caid                          = 090F
detect                        = cd
mhz                           = 375
cardmhz                       = -1
group                         = 1
emmcache                      = 1,3,15,0
blockemm-unknown              = 1
dropbadcws                    = 1
ratelimitecm                  = 4
ratelimittime                 = 9000
ecmunique                     = 1
srvidholdtime                 = 2000
cooldown                      = 30,600

Log from Oscam

(main) System name    = Linux2
(main) Host name      = vusolo2
(main) Release        = 3.13.5
(main) Version        = #1 SMP Wed Feb 3 22:21:13 CET 2016
(main) Machine        = mips
(main) Stb model      = dm8000
(main) Stb vumodel    = vusolo2
(main) Stb boxtype    = vusolo2
(main) creating pidfile /tmp/oscam.pid with pid 6342 couldn't open statistics file: /var/log/oscam/oscamuser.log
(config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
(main) signal handling initialized
(config) 10 provid's loaded
(config) 164 service-id's loaded in 1 ms
(net) monitor: initialized (fd=4, port=988)
(net) newcamd: initialized (fd=5, port=10000)
(net) -> CAID: 0B00 PROVID: 000000, FFFFFF

(reader) upper_card_Viasat [internal] creating thread for device /dev/sci1
(reader) lower_card_CanalDigital [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
(reader) lower_card_CanalDigital [internal] Reader sci internal, detected box type: vusolo2
(stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
(main) waiting for local card init
 
(reader) upper_card_Viasat [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
 
(reader) upper_card_Viasat [internal] Reader sci internal, detected box type: vusolo2
(reader) upper_card_Viasat [internal] card detected
(reader) upper_card_Viasat [internal] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
(reader) upper_card_Viasat [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
 
(reader) upper_card_Viasat [internal] Calculated work ETU is 82.67 us reader mhz = 450

(reader) upper_card_Viasat [internal] Buffers readed  0 bytes total time_us 4796699
 
(reader) upper_card_Viasat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
(reader) upper_card_Viasat [internal] Card type:   VTTV 
(reader) upper_card_Viasat [internal] Rom version: 10L9  
(reader) upper_card_Viasat [internal] Credit available on card: 0 euro
(reader) upper_card_Viasat [internal] classD0 ins36: returned unknown type=0xF9 - parsing may fail
(reader) upper_card_Viasat [internal] classD0 ins36: returned unknown type=0x03 - parsing may fail
(reader) upper_card_Viasat [internal] FuseByte: 25
(reader) upper_card_Viasat [internal] Region Code: SWE00000
(reader) upper_card_Viasat [internal] Country Code: SWE







Also tagged with one or more of these keywords: usb, Oscam, PLi

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users