OK, i changed the feed paths to openpli because i don`t have my own feed.
I have to setup a webserver and setup my own feed.
I would like to install only iptables from my feed and than change back to openpli feed. Could this be a problem?
Iptables on Openpli
Started by christophe_dury, 08 Feb 2016 08:52
53 replies to this topic
Re: Iptables on Openpli #21
-
- Senior Member
- 68 posts
+1
Neutral
Posted 26 February 2016 - 21:32
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #22
-
- Senior Member
- 68 posts
+1
Neutral
Posted 26 February 2016 - 21:35
I can also move the feed to my local stb hdd and change the paths to the local hdd. I will try this first.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #23
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 26 February 2016 - 22:05
Yes that works 
Here is an example when I had xpeedc feeds on usb stick...
Here is an example when I had xpeedc feeds on usb stick...
src openpli-xpeedc file:///media/usb/build/tmp/deploy/ipk/xpeedc
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Iptables on Openpli #24
-
- Senior Member
- 68 posts
+1
Neutral
Posted 26 February 2016 - 23:07
feed works but there is a new problem.
... * parse_from_stream_nomalloc: Missing new line character at end of file! * parse_from_stream_nomalloc: Missing new line character at end of file! * parse_from_stream_nomalloc: Missing new line character at end of file! * parse_from_stream_nomalloc: Missing new line character at end of file! * opkg_install_cmd: Cannot install package iptables.
i can`t install iptables. 
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #25
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 26 February 2016 - 23:11
Can you show how you have changed the feeds to point in local media?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Iptables on Openpli #26
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 27 February 2016 - 00:33
You can also copy the needed ipks from your build to your box and install them there manually via "opkg install <path to file>".
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: Iptables on Openpli #27
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 27 February 2016 - 17:38
feed works but there is a new problem.
... * parse_from_stream_nomalloc: Missing new line character at end of file! * parse_from_stream_nomalloc: Missing new line character at end of file! * parse_from_stream_nomalloc: Missing new line character at end of file! * parse_from_stream_nomalloc: Missing new line character at end of file! * opkg_install_cmd: Cannot install package iptables.i can`t install iptables.
This is a familiar problem. I don't know what it is caused by, but what helps is to change src/gz into src in the feeds files. And then probably clear the opkg tmp directory.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Iptables on Openpli #28
-
- Senior Member
- 68 posts
+1
Neutral
Posted 27 February 2016 - 21:58
I have now removed the /gz in the feed config files.
src openpli-all file://media/hdd/ipk/all #src/gz openpli-all http://downloads.pli-images.org/feeds/openpli-4/all
src openpli-mips32el file://media/hdd/ipk/mips32el #src/gz openpli-mips32el http://downloads.pli-images.org/feeds/openpli-4/mips32el
src openpli-vusolo2 file://media/hdd/ipk/vusolo2 #src/gz openpli-vusolo2 http://downloads.pli-images.org/feeds/openpli-4/vusolo2
opkg can not find iptables.
root@vusolo2:~# opkg update Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-3rd-party. Downloading http://downloads.pli-images.org/feeds/openpli-4/3rd-party-vusolo2/Packages.gz. Updated list of available packages in /var/lib/opkg/openpli-3rd-party-vusolo2. Downloading file://media/hdd/ipk/all/Packages. Updated list of available packages in /var/lib/opkg/openpli-all. Downloading file://media/hdd/ipk/mips32el/Packages. Updated list of available packages in /var/lib/opkg/openpli-mips32el. Downloading file://media/hdd/ipk/vusolo2/Packages. Updated list of available packages in /var/lib/opkg/openpli-vusolo2. root@vusolo2:~# opkg install iptables Unknown package 'iptables'. Collected errors: * opkg_install_cmd: Cannot install package iptables.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #29
-
- Senior Member
- 68 posts
+1
Neutral
Posted 28 February 2016 - 20:48
Manual installation works but there are still some modules missing.
root@vusolo2:~# cd /media/hdd/ipk/mips32el root@vusolo2:/media/hdd/ipk/mips32el# opkg install iptables_1.4.21-r0_mips32el.ipk Installing iptables (1.4.21-r0) on root. iptables: unsatisfied recommendation for kernel-module-nf-defrag-ipv4 iptables: unsatisfied recommendation for kernel-module-nf-conntrack iptables: unsatisfied recommendation for kernel-module-ipt-masquerade iptables: unsatisfied recommendation for kernel-module-nf-nat iptables: unsatisfied recommendation for kernel-module-nf-conntrack-ipv4 iptables: unsatisfied recommendation for kernel-module-iptable-nat Installing kernel-module-x-tables (3.13.5-r2.4.4) on root. Downloading file://media/hdd/ipk/vusolo2/kernel-module-x-tables_3.13.5-r2.4.4_vusolo2.ipk. Installing kernel-module-ip-tables (3.13.5-r2.4.4) on root. Downloading file://media/hdd/ipk/vusolo2/kernel-module-ip-tables_3.13.5-r2.4.4_vusolo2.ipk. Installing kernel-module-iptable-filter (3.13.5-r2.4.4) on root. Downloading file://media/hdd/ipk/vusolo2/kernel-module-iptable-filter_3.13.5-r2.4.4_vusolo2.ipk. Configuring kernel-module-x-tables. Configuring kernel-module-ip-tables. Configuring kernel-module-iptable-filter. Configuring iptables.
I will try to build a new image. Hopefully i will find all missing modules.
If that works, can i change the feed config paths back openpli? Or is it better to keep the local feed on my hdd?
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #30
-
- Senior Member
- 68 posts
+1
Neutral
Posted 28 February 2016 - 21:25
It seems that i dont need to build again.
My rules has been accepted in the command line.
Seems that the following modules are enough:
kernel-module-x-tables. kernel-module-ip-tables. kernel-module-iptable-filter
I changed die feed config paths to openpli because the packages in the local feed can not be found by opkg. But i think it was a bad idea because my kernel has been updated now.
root@vusolo2:~# opkg install openvpn Installing openvpn (2.3.2-r0.0) on root. Downloading http://downloads.pli-images.org/feeds/openpli-4/mips32el/openvpn_2.3.2-r0.0_mips32el.ipk. Installing liblzo2-2 (2.08-r0.0) on root. Downloading http://downloads.pli-images.org/feeds/openpli-4/mips32el/liblzo2-2_2.08-r0.0_mips32el.ipk. Installing kernel-module-tun (3.13.5-r2.4.4.8) on root. Downloading http://downloads.pli-images.org/feeds/openpli-4/vusolo2/kernel-module-tun_3.13.5-r2.4.4.8_vusolo2.ipk. Upgrading kernel-3.13.5 from 3.13.5-r2.4.4 to 3.13.5-r2.4.4.8 on root. Downloading http://downloads.pli-images.org/feeds/openpli-4/vusolo2/kernel-3.13.5_3.13.5-r2.4.4.8_vusolo2.ipk. Upgrading kernel-image-3.13.5 from 3.13.5-r2.4.4 to 3.13.5-r2.4.4.8 on root. Downloading http://downloads.pli-images.org/feeds/openpli-4/vusolo2/kernel-image-3.13.5_3.13.5-r2.4.4.8_vusolo2.ipk. Configuring kernel-image-3.13.5. Erasing 128 Kibyte @ 200000 - 28% complete. Skipping bad block at 0x00220000 Erasing 128 Kibyte @ 700000 - 100% complete. Writing at 0x00000000 Writing at 0x00020000 Writing at 0x00040000 Writing at 0x00060000 Writing at 0x00080000 Writing at 0x000a0000 Writing at 0x000c0000 Writing at 0x000e0000 Writing at 0x00100000 Writing at 0x00120000 Writing at 0x00140000 Writing at 0x00160000 Writing at 0x00180000 Writing at 0x001a0000 Writing at 0x001c0000 Writing at 0x001e0000 Writing at 0x00200000 Skipping bad block at 0x00220000 Writing at 0x00240000 Writing at 0x00260000 Writing at 0x00280000 Writing at 0x002a0000 Writing at 0x002c0000 Writing at 0x002e0000 Writing at 0x00300000 Writing at 0x00320000 Writing at 0x00340000 Writing at 0x00360000 Writing at 0x00380000 Writing at 0x003a0000 Writing at 0x003c0000 Writing at 0x003e0000 Writing at 0x00400000 Configuring kernel-3.13.5. Configuring liblzo2-2. Configuring kernel-module-tun. Configuring openvpn.
What can be the reason for the problem with the local feed?
root@vusolo2:~# opkg install openvpn Unknown package 'openvpn'. Collected errors: * opkg_install_cmd: Cannot install package openvpn.
The config is in Post 28.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #31
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 28 February 2016 - 21:52
As said why don't you copy the needed ipks to your box and install them manually?
I guess at first you want to test whether it really works. Later you can try to setup the feed.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: Iptables on Openpli #32
-
- Senior Member
- 68 posts
+1
Neutral
Posted 29 February 2016 - 21:48
I did so and it works. You can see it in Post 29.
I just wanted to install openvpn after the successful installation of iptables but it failed. A manual installation should work.
What i don't understand is why opkg cant find packages on my local feed.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #33
-
- Senior Member
- 68 posts
+1
Neutral
Posted 29 February 2016 - 22:48
Ok, it seems that there is still one or more kernel-modules are missing.
root@vusolo2:~# iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables: No chain/target/match by that name.
The problem is that i cant find all needed modules in the config tool.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #34
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 1 March 2016 - 19:20
I did not say "remote the whole line", I said "remove the /gz".
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Iptables on Openpli #35
-
- Senior Member
- 68 posts
+1
Neutral
Posted 1 March 2016 - 21:42
I did so like posted in post 28.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #36
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 1 March 2016 - 21:57
Did you build openvpn? Just compiling image with MACHINE=xxx make image will build the bare minimum. You need to build feeds or openvpn separately.
Edited by athoik, 1 March 2016 - 21:57.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Iptables on Openpli #37
-
- Senior Member
- 68 posts
+1
Neutral
Posted 1 March 2016 - 22:06
I have build the feed.
MACHINE=vusolo2 bitbake openpli-enigma2-feed
Then copied the whole ipk folder to my vusolo2 hdd.
Last night i build a new image + feed. There are more kernel-modules activated. I will test it in the next hour.
But i think there is still something missing because i can not find all required kernel-modules in the config tool. If the needed modules are not in the source thay can not be found and activated.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #38
-
- Senior Member
- 68 posts
+1
Neutral
Posted 1 March 2016 - 22:35
The test with the new build was not successful.
root@vusolo2:/media/hdd/ipk/mips32el# opkg install iptables Installing iptables (1.4.21-r0) on root. Downloading file://media/hdd/ipk/mips32el/iptables_1.4.21-r0_mips32el.ipk. iptables: unsatisfied recommendation for kernel-module-nf-defrag-ipv4 iptables: unsatisfied recommendation for kernel-module-nf-conntrack iptables: unsatisfied recommendation for kernel-module-ipt-masquerade iptables: unsatisfied recommendation for kernel-module-nf-nat iptables: unsatisfied recommendation for kernel-module-nf-conntrack-ipv4 iptables: unsatisfied recommendation for kernel-module-iptable-nat Installing kernel-module-x-tables (3.13.5-r2.4.4) on root. Downloading file://media/hdd/ipk/vusolo2/kernel-module-x-tables_3.13.5-r2.4.4_vusolo2.ipk. Installing kernel-module-ip-tables (3.13.5-r2.4.4) on root. Downloading file://media/hdd/ipk/vusolo2/kernel-module-ip-tables_3.13.5-r2.4.4_vusolo2.ipk. Installing kernel-module-iptable-filter (3.13.5-r2.4.4) on root. Downloading file://media/hdd/ipk/vusolo2/kernel-module-iptable-filter_3.13.5-r2.4.4_vusolo2.ipk. Configuring kernel-module-x-tables. Configuring kernel-module-ip-tables. Configuring kernel-module-iptable-filter. Configuring iptables. root@vusolo2:/media/hdd/ipk/mips32el# iptables -P INPUT ACCEPT root@vusolo2:/media/hdd/ipk/mips32el# iptables -F root@vusolo2:/media/hdd/ipk/mips32el# iptables -A INPUT -i lo -j ACCEPT root@vusolo2:/media/hdd/ipk/mips32el# iptables -A INPUT -i eth0 -j ACCEPT root@vusolo2:/media/hdd/ipk/mips32el# iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables: No chain/target/match by that name. root@vusolo2:/media/hdd/ipk/mips32el# iptables -A INPUT -i eth0 -p tcp --dport 21 -j ACCEPT iptables: No chain/target/match by that name. root@vusolo2:~#
There is still something missing.
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
Re: Iptables on Openpli #39
-
- PLi® Core member
- 70,562 posts
+1,815
Excellent
Posted 1 March 2016 - 22:42
What does this give you?
iptables -L
and
lsmod|grep tables
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Iptables on Openpli #40
-
- Senior Member
- 68 posts
+1
Neutral
Posted 1 March 2016 - 22:48
I found the attachment function. 
Can someone delete my last post?
Attached Files
-
vusolo2_defconfig.txt 76.57KB
15 downloads
TechniSat Multytenne Twin: 19,2°E | 13,0°E | 23,5°E | 28,2°E -> OpenPLi4.0@vusolo2
Multifeed Offset: 19,2°E | 13,0°E | 4,8°E | 5,0°W -> OpenPLi4.0@dm800se + OpenPLi4.0@vuzero
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
