Posted 11 February 2016 - 11:38
Hi, i have a vu+solo with a fresh image from today. Then i run on telnet
opkg update opkg upgrade enigma2-plugin-extensions-xmltvimport opkg upgrade enigma2-plugin-extensions-xmltvimport-rytec
After a reboot i configure the sources (rytec italy) but when i try to start the import manually
[EPGImport] Error at start: 'NoneType' object has no attribute 'endswith'
Why? What i missed?
On my solo2 working well with the same commands/configuration.
Thanks
Posted 11 February 2016 - 11:39
That is een OpenPLi image? From our website?
That looks like a bug that has been fixed weeks ago...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 February 2016 - 11:53
That is een OpenPLi image? From our website?
That looks like a bug that has been fixed weeks ago...
Of course, openpli image downloaded from here
http://downloads.pli...0160211_usb.zip
Posted 11 February 2016 - 21:48
I have the same problem.
Same error.
I tried everything possible.
I flashed the vu+ solo many times with different official version of opli 4.0.
Nothing happened all the time I receive the same mistake.
[EPGImport] Error at start: 'NoneType' object has no attribute 'endswith'
Edited by debaser69, 11 February 2016 - 21:51.
Posted 12 February 2016 - 08:52
Is it a bug? We can hope only in dev's help 
Posted 12 February 2016 - 10:49
Just checked the log on my box, no problems with this mornings import?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 February 2016 - 11:20
Just checked the log on my box, no problems with this mornings import?
Do you have a solo? Mine today, after a software upgrade, same error. On solo2 no problem.
Posted 12 February 2016 - 11:41
No, I don't. But as the plugin is not hardware dependent, I wouldn't know what would be different. There is only one version of the plugin.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 February 2016 - 11:43
The error line suspects the plugin needs a sanity check for not give the GSOD... but somehow it also suggested it is related that it did not recieve data...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 12 February 2016 - 11:49
Why only on solo? Could be related to version of python packages?
root@vusolo2:~# opkg list-installed | grep python libpython2.7-1.0 - 2.7.3-r5.3.9 python-cheetah - 2.4.4-r3.9 python-codecs - 2.7.3-r5.3.9 python-compression - 2.7.3-r5.3.9 ---
root@vusolo:~# opkg list-installed | grep python libpython2.7-1.0 - 2.7.3-r5.3.0 python-cheetah - 2.4.4-r3.0 python-codecs - 2.7.3-r5.3.0 python-compression - 2.7.3-r5.3.0 ---
What can we do to solve?
Edited by dax, 12 February 2016 - 11:49.
Posted 12 February 2016 - 11:54
First step is to know where the error comes from, because this single line doesn't really help... Can you post the entire log?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 February 2016 - 16:30
First step is to know where the error comes from, because this single line doesn't really help... Can you post the entire log?
Yes, but it isn't very verbose...
[EPGImport] autostart (0) occured at 156.338551 [EPGImport] autostart (0) occured at 156.510103 [EPGImport] WakeUpTime now set to 25187 (now=156) [EPGImport] No settings [Errno 2] No such file or directory: '/etc/enigma2/epgimport.conf' [EPGImport] Selected sources: ['Rytec Italy XMLTV'] sourcesDone(): True ['Rytec Italy XMLTV'] [EPGImport] nextImport, source= Rytec Italy XMLTV [EPGImport] Error at start: 'NoneType' object has no attribute 'endswith'
The file epgimport.conf is present, configured for rytec italy.
After 35 minutes no events imported. But if i try again a manual download the log say
[EPGImport] autostart (0) occured at 156.338551 [EPGImport] autostart (0) occured at 156.510103 [EPGImport] WakeUpTime now set to 25187 (now=156) [EPGImport] No settings [Errno 2] No such file or directory: '/etc/enigma2/epgimport.conf' [EPGImport] Selected sources: ['Rytec Italy XMLTV'] sourcesDone(): True ['Rytec Italy XMLTV'] [EPGImport] nextImport, source= Rytec Italy XMLTV [EPGImport] Error at start: 'NoneType' object has no attribute 'endswith' [EPGImport] Already running, won't start again
Posted 12 February 2016 - 16:32
The file epgimport.conf is present, configured for rytec italy.
[EPGImport] No settings [Errno 2] No such file or directory: '/etc/enigma2/epgimport.conf'
As you see in the log... it is not present... 
(possibly renamed? typo?)
Edited by littlesat, 12 February 2016 - 16:33.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 12 February 2016 - 16:49
As you see in the log... it is not present...
I'm absolutely sure that the file is present! Why the next lines say
[EPGImport] No settings [Errno 2] No such file or directory: '/etc/enigma2/epgimport.conf' [EPGImport] Selected sources: ['Rytec Italy XMLTV'] sourcesDone(): True ['Rytec Italy XMLTV']
???
I have been also tried a copy/paste file from a (working) solo2. Same error..
root@vusolo:~# ls -l /etc/enigma2/ | grep epg -rw-r--r-- 1 root root 43 Feb 12 16:51 epgimport.conf
epgimport.conf.tar.gz 183bytes
13 downloads
Edited by dax, 12 February 2016 - 16:52.
Posted 13 February 2016 - 10:20
That is een OpenPLi image? From our website?
That looks like a bug that has been fixed weeks ago...
Nope this was never fixed !
I posted about this a few months ago and no one could find the answer even after posting my logs and my dmesg ect
Ive had to resort to using the older version from before the plugin was updated and locking it down using the chattr command to prevent it being updated to the newer version when I update the image online.
Ian.
Posted 13 February 2016 - 10:26
Dam this inability to edit your posts is a pain.
Here's the thread.
http://forums.openpl...date-on-github/
Ian.
Posted 13 February 2016 - 10:56
on the Glassfibre 1GB DVB-C...
Posted 13 February 2016 - 15:49
So the bug is still present...
@ian1095: which kind of decoder do you have?
Posted 13 February 2016 - 17:49
VU+ Solo
The bug affects only Gen 1 VU+ boxes.
Gen 2 are unaffected.
Ian.
Posted 14 February 2016 - 14:39
For the sake of comparison, I have selected Italy on my receiver (ET-9500) in the EPGimport and saved the configuration.
The image of the file is attached. (I cannot see a difference with your file).
Willy
epgimport.conf.jpg 76.56KB
8 downloads
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
0 members, 2 guests, 0 anonymous users
