7 replies to this topic

[dmh]

Hi,

 

I'm all new to this forum, and I've considered to install the Open Pli image on my DM800HD SE (Not a clone), as I've heard positives about the image. Currently I'm running the latest image of NewNigma2, and I'm pretty much satisfied with it. From what I've read and heard some tend more to NewNigma while others says 'Open Pli' is a must, therefore I've decided to try Open Pli after years with NewNigma2. Before the install of Open Pli I have some quesitons, and I hope some of you guys have the answers. I think it's necessary having tried both images before being able to answer the questions.

 

1. The main differences of setting up Open Pli vs NewNigma2? Do I need to be aware of something which could be crucial?

 

2. Will I be able to load my channel-list with bouquets etc. directly by exporting my current channel-list from NewNigma2 and sendind the files to the dreambox when Open Pli is installed?

 

3. Does Open Pli contain/is-it-possible-to-install a web interface such as NewNigma2 is born with an installed webinterface plugin?

 

4. If yes: The web interface of Open Pli is better/worse, because? This is more or less a 'In my opinion Open Pli/NewNigma2 is better/worse because there are....'

 

5. Is FlashExpander available in Open Pli? - I've had som issues with NewNigma2 where I ran out of Flash memory, and had to install the image from new, and install FlashExpander, which expanded the flash capacity to a USB. This gave me the option to install more plugins (even If I'm not downloading skins, picons etc. the flash space was full shortly after installing NewNigma2).

 

6. I'm using the Positioner Setup in NewNigma2 to fine tune the position of my satellite dish, is this feature available in Open Pli?

 

7) This question is not directly linked to Open Pli, but I would assume it's the same issue if it's possible to stream through the web interface in Open Pli. Sometimes I'm streaming content through the web interface in NewNigma2 (outside of my home) through my iPhone, iPad etc. I was just wondering even if I have changed the password on root, or in this case, using another user (created through Telnet), I've found out that through IP sniffing the *.m3u files content can be sniffed and used by others to stream through ie. VLC without having the user or pass to my dreambox. I'm just wondering why is this not more protected, or is there a way to protect my streaming-method?

 

I think these are my questions for now. I know there are a lot, and I hope some of you will answer them. Please feel free to elaborate if necessary.

[Max66]

Hi,

 

I also moved from Newnigma to OpenPLI a few years ago, so maybe I can provide you with some answers:

 

1. Nothing in particular. Everything I had in Newnigma continued to work the same in PLI (fancontrol2, softcam). If you use a softcam, you may have to tune a little (usually the box type value)

 

2. Yes. You can use DreamboxEdit or iDreamX for that purpose

 

3. Yes, PLI comes with OpenWebif.

 

4. In my opinion, it is even better than the Newnigma interface

 

5. I don't know if FlashExpander is available but you should not need it. One of the reason I moved from Newnigma to OpenPLI was the Newnigma image size: it is almost double the size of OpenPLI, so you should have sufficient space available for your own stuff

 

6. I'm not sure, I use a fixed installation

 

7. Yes you can stream through the Web interface but I don't know about password-protecting or encrypting the streams

 

Since you own a Dreambox, you may want to check another image. It is called SatDreamGr and is basically OpenPLI with some specific tuning for Dreambox receivers. After moving from Newnigma to OpenPLI, I moved to SatDreamGr and am very happy with it. Another important difference is that OpenPLI is in constant development, so if you update on a "bad day", you may have some issues (which are normally fixed the next day). With SatDreamGr, you get a new fully tested release every couple of months; it is more similar to what you have with Newnigma. If you need more information, contact Athoik, he is the owner of SatDreamGr.

[WanWizard]

As to your last remark, as of OpenPLi 5, we will publish stable images again, and expirimental images for those wanting to live on the bleeding edge.

[Marc-UK]

As to your last remark, as of OpenPLi 5, we will publish stable images again, and expirimental images for those wanting to live on the bleeding edge.

Good to know, thank you

Will OpenPli 5 be available for Dreambox?

Edited by Marc-UK, 1 April 2016 - 08:55.

[WanWizard]

No decision has been made as of yet.

[dmh]

Hi guys,

 

Thanks for your replies. I've already installed OpenPli beta 4 from past 3 days, I just didn't return to this forum as I ticked the checkbox to send me a E-mail as soon as someone posted anything here - which it doesn't. Anyway a doublecheck is still a good old fashion trick

 

If OpenPli 5 won't be available for Dreambox, I will consider SatDreamGr, as I don't want to have a image which is not being developed continuously.

 

One more question, I downloaded Softcam 2.3.0 and my channels are opening very slow (4-6 seconds). Can softcam be the issue? I'm asking as I'm not able to test this at home right now.

[WanWizard]

Your last question suggests you are not using a local smartcard?

 

If so, your question is out-of-bounds. our forum rules don't allow discussing illegal activity. If you do, I doubt it would be caused by the softcam, providing you have a card that is fully supported by CCcam 2.3.0.

[dmh]

Your last question suggests you are not using a local smartcard?

 

If so, your question is out-of-bounds. our forum rules don't allow discussing illegal activity. If you do, I doubt it would be caused by the softcam, providing you have a card that is fully supported by CCcam 2.3.0.

Sorry. You are right.