[UKsat] Missing EPG - UKsat
Re: [UKsat] Missing EPG - UKsat #101
Posted 26 September 2016 - 01:20
1:0:1:9:2BC:13E:820000:0:0:0: 13.0E
1:0:1:2760:402:1:C00000:0:0:0: 19.2E
1:0:1:1388:7:56:300000:0:0:0: 4.8E
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Re: [UKsat] Missing EPG - UKsat #102
Posted 26 September 2016 - 08:34
I could. But nobody can use these channels on an enigma2 receiver.
So I would not be adding these HD versions.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: [UKsat] Missing EPG - UKsat #103
Posted 26 September 2016 - 13:01
I could. But nobody can use these channels on an enigma2 receiver.
So I would not be adding these HD versions.
Willy
I think you are not correct.
There are some HD channels still available on Enigma2 boxes. I'm not sure but MUTV HD and Boxnation HD are probably two of them.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: [UKsat] Missing EPG - UKsat #104
Re: [UKsat] Missing EPG - UKsat #105
Re: [UKsat] Missing EPG - UKsat #106
Re: [UKsat] Missing EPG - UKsat #107
Posted 27 September 2016 - 13:04
First: Since a couple of days I have removed the links with a whole bunch of HD channels. Because nobody on an enigma2 receiver can watch these channels.
Are you sure you are not looking at a HD version?
Second: More4, E4, Film4 SD versions have EPG on my receiver
Also all ITV's (2-4) have EPG in both the SD and HD versions. Also Channel5 has EPG on SD and HD
I guess there is something wrong on your receiver. F.i. in the last couple of days ITV3 and 4 have moved from transponder.
So check this pls.
Next reboot your receiver, and try then again an import.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: [UKsat] Missing EPG - UKsat #108
Posted 27 September 2016 - 15:36
First: Since a couple of days I have removed the links with a whole bunch of HD channels. Because nobody on an enigma2 receiver can watch these channels.
Are you sure you are not looking at a HD version?
Second: More4, E4, Film4 SD versions have EPG on my receiver
Also all ITV's (2-4) have EPG in both the SD and HD versions. Also Channel5 has EPG on SD and HD
I guess there is something wrong on your receiver. F.i. in the last couple of days ITV3 and 4 have moved from transponder.
So check this pls.
Next reboot your receiver, and try then again an import.
Willy
Thank you for your reply
I try to explain why I need the EPG of this channels.
I am living in Austria near Salzburg (no change to receive UK channels from satellite)
But, I have an E2 Box and can watch the UK channels over IPTV.
I listed on my Receiver the UK IPTV channels and also the satellit channels.
So I have an EPG for my UK channels
mfg
Josef
Re: [UKsat] Missing EPG - UKsat #109
Posted 27 September 2016 - 16:05
Ok. You probably have selected a HD version of the channel.
Following service refs should be OK:
<channel id="More4.uk">1:0:1:2094:7FA:2:11A0000:0:0:0:</channel> <!-- More4 --> <channel id="More4.uk">1:0:1:2EFE:7EF:2:11A0000:0:0:0:</channel> <!-- More 4 --> <channel id="E4.uk">1:0:1:2071:7FA:2:11A0000:0:0:0:</channel> <!-- E4 --> <channel id="E4.uk">1:0:1:23F8:7FA:2:11A0000:0:0:0:</channel> <!-- e4 --> <channel id="E4.uk">1:0:1:2F12:7EF:2:11A0000:0:0:0:</channel> <!-- E4 --> <channel id="Channel5.uk">1:0:19:1E46:809:2:11A0000:0:0:0:</channel> <!-- Channel 5 HD --> <channel id="Channel5.uk">1:0:19:F69:7D5:2:11A0000:0:0:0:</channel> <!-- Channel 5 HD --> <channel id="Channel5.uk">1:0:1:1E15:809:2:11A0000:0:0:0:</channel> <!-- Channel 5 --> <channel id="Channel5.uk">1:0:1:1E16:809:2:11A0000:0:0:0:</channel> <!-- Channel 5 --> <channel id="Film4.uk">1:0:1:2404:7F9:2:11A0000:0:0:0:</channel> <!-- Film4 --> <channel id="Film4.uk">1:0:1:209E:7FA:2:11A0000:0:0:0:</channel> <!-- Film4 --> <channel id="ITV2.uk">1:0:19:50E6:80F:2:11A0000:0:0:0:</channel> <!-- ITV 2 HD --> <channel id="ITV2.uk">1:0:1:2756:7FC:2:11A0000:0:0:0:</channel> <!-- ITV 2 --> <channel id="ITV3.uk">1:0:19:523A:812:2:11A0000:0:0:0:</channel> <!-- ITV 3 HD --> <channel id="ITV3.uk">1:0:1:2814:806:2:11A0000:0:0:0:</channel> <!-- ITV 3 --> <channel id="ITV4.uk">1:0:19:5244:812:2:11A0000:0:0:0:</channel> <!-- ITV 4 HD --> <channel id="ITV4.uk">1:0:1:2758:7FC:2:11A0000:0:0:0:</channel> <!-- ITV 4 -->
Attach your IPTV ref to one of the corresponding service refs. You have to edit your bouquet file for this.
You may have to try a several, because some may not be available in your receiver. (I know some are outdated)
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: [UKsat] Missing EPG - UKsat #110
Re: [UKsat] Missing EPG - UKsat #111
Posted 1 October 2016 - 23:23
Has a different shedule to the SD channel would it be possible to update it with the HD shedule, it can be found here on number 490 http://tv.sky.com/tv-guide#/day/0
Thanks
Re: [UKsat] Missing EPG - UKsat #112
Re: [UKsat] Missing EPG - UKsat #113
Posted 3 October 2016 - 15:25
Same thing on the +1 version of channels
Do you think it could be a problem with the source?
Regards
Re: [UKsat] Missing EPG - UKsat #114
Posted 3 October 2016 - 15:49
Channel 4 HD za 08.10.2016 Grand Designs (?) 20:00 - 21:00 (60 min.) Channel 4 HD za 08.10.2016 Walking Through Time (?) 21:00 - 22:00 (60 min.)
You mean this?
This is indeed a problem with the source.
Will take a look if i can be remedied.
Willy
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: [UKsat] Missing EPG - UKsat #115
Re: [UKsat] Missing EPG - UKsat #116
Re: [UKsat] Missing EPG - UKsat #117
Re: [UKsat] Missing EPG - UKsat #118
Re: [UKsat] Missing EPG - UKsat #119
Re: [UKsat] Missing EPG - UKsat #120
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users