31 replies to this topic

[Marchella]

WTE computer and android box everything works , I do not think that the stick is damaged ....

[Marchella]

 

WTE I set ATV_5.3 image defined in the log but its menu is not ....

 

Spoiler

root@formuler3:~# 

lsmod

 

 

Module                  Size  Used by

ipv6                  381343  45

dvb_usb_cxusb          45308  1

dib0070                 8219  1 dvb_usb_cxusb

dvb_usb                17738  1 dvb_usb_cxusb

boxmodel                 868  0

xfs                   695910  0

libcrc32c                714  1 xfs

formuler3            7697798  2

formuler3_3            33009  1 formuler3

formuler3_2            22287  0

formuler3_1             6541  3 formuler3_2,formuler3_3,formuler3

root@formuler3:~# 

lsusb

 

 

Bus 001 Device 003: ID 05e3:0608

Bus 002 Device 002: ID 04a3:0101

Bus 001 Device 001: ID 1d6b:0002

Bus 002 Device 001: ID 1d6b:0001

Bus 001 Device 004: ID 0572:c688

root@formuler3:~# 

dmesg

 

 

SMP: CPU1 is running

Brought up 2 CPUs

devtmpfs: initialized

NET: Registered protocol family 16

USB0: power enable is active high; overcurrent is active low

SCSI subsystem initialized

libata version 3.00 loaded.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Linux video capture interface: v2.00

Advanced Linux Sound Architecture Driver Initialized.

Bluetooth: Core ver 2.20

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

cfg80211: Calling CRDA to update world regulatory domain

Switched to clocksource wktmr

FS-Cache: Loaded

NET: Registered protocol family 2

TCP established hash table entries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

TCP: reno registered

UDP hash table entries: 256 (order: 1, 8192 bytes)

UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

futex hash table entries: 512 (order: 3, 32768 bytes)

NFS: Registering the id_resolver key type

Key type id_resolver registered

Key type id_legacy registered

nfs4filelayout_init: NFSv4 File Layout Driver Registering...

Installing knfsd (copyright © 1996 okir@monad.swb.de).

fuse init (API version 7.23)

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

io scheduler noop registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

console [ttyS0] disabled

serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A

console [ttyS0] enabled

serial8250.0: ttyS1 at MMIO 0

x10406840 (irq = 63, base_baud = 5062500) is a 16550A

serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A

loop: module loaded

ahci ahci.0: SSS flag set, parallel bus scan disabled

ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

ahci ahci.0: flags: ncq sntf stag clo slum part 

scsi host0: ahci

scsi host1: ahci

ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87

ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87

brcmstb_nand: NAND controller driver is loaded

libphy: Fixed MDIO Bus: probed

__clk_enable: network [1]

__clk_enable: enet [1]

bcm7552_pm_genet_enable 00

bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0

bcmgenet bcmgenet.0: failed to get enet-eee clock

libphy: bcmgenet MII bus: probed

bcmgenet bcmgenet.0: configuring instance for internal PHY

attached PHY at address 1

__clk_disable: enet [0]

bcm7552_pm_genet_disable 00

__clk_disable: network [0]

usbcore: registered new interface driver zd1201

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

__clk_enable: usb [1]

bcm7552_pm_usb_enable 00

ehci-brcm ehci-brcm.0: Broadcom STB EHCI

ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300

ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

ohci-brcm ohci-brcm.0: Broadcom STB OHCI

ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2

ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400

ata1: SATA link down (SStatus 0 SControl 300)

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

usbcore: registered new interface driver usb-storage

mousedev: PS/2 mouse device common for all mice

i2c /dev entries driver

usbcore: registered new interface driver btusb

Driver 'mmcblk' needs updating - please use bus_type methods

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyri

ght© Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

sdhci-brcmstb sdhci-brcmstb.0: Enabling controller

sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found

sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found

mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA

hidraw: raw HID events driver © Jiri Kosina

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

TCP: cubic registered

NET: Registered protocol family 17

Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Bluetooth: HIDP socket layer initialized

Key type dns_resolver registered

PM: CP0 COUNT/COMPARE frequency does not depend on divisor

EBI CS0: setting up NAND flash (primary)

nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda

nand: AMD/Spansion S34ML02G1

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda

nand: AMD/Spansion S34ML02G1

nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

Creating 3 MTD partitions on "brcmnand.0":

0x000000500000-0x000010000000 : "complete"

0x000000500000-0x000000b00000 : "kernel"

0x000000b00000-0x000010000000 : "rootfs"

ubi0: default fastmap pool size: 95

ubi0: default fastmap WL pool size: 25

ubi0: attaching mtd2

ata2: SATA link down (SStatus 0 SControl 300)

ubi0: attached by fastmap

ubi0: fastmap pool size: 95

ubi0: fastmap WL pool size: 25

ubi0: attached mtd2 (name "rootfs", size 245 MiB)

ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi0: good PEBs: 1956, bad PEBs: 4, corrupted PEBs: 0

ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128

ubi0: max/mean erase counter: 2/0, WL

 threshold: 4096, image sequence number: 1805831095

ubi0: available PEBs: 0, total reserved PEBs: 1956, PEBs reserved for bad PEB handling: 36

usb 2-1: new full-speed USB device number 2 using ohci-brcm

ubi0: background thread "ubi_bgt0d" started, PID 64

ALSA device list:

  No soundcards found.

UBIFS: background thread "ubifs_bgt0_0" started, PID 65

usb 1-2: new high-speed USB device number 3 using ehci-brcm

UBIFS: recovery needed

hub 1-2:1.0: USB hub found

hub 1-2:1.0: 2 ports detected

random: nonblocking pool is initialized

UBIFS: recovery completed

UBIFS: mounted UBI device 0, volume 0, name "rootfs"

UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS: FS size: 241635328 bytes (230 MiB, 1903 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

UBIFS: reserved for root: 0 bytes (0 KiB)

UBIFS: media format: w4/r0 (latest is w4/r0), UUID 553CF684-F9D9-4367-901D-D9B3D2F138BC, small LPT model

VFS: Mounted root (ubifs filesystem) on device 0:13.

devtmpfs: mounted

Freeing unused kernel memory: 232K (80906000 - 80940000)

usb 1-2.1: new high-speed USB device number 4 using ehci-brcm

usb 1-2.1: language id specifier not provided by device, defaulting to English

usbcore: registered new interface driver tpm

formuler3: module_layout: kernel tainted.

Disabling lock debugging due to kernel taint

i2c i2c-2: This adapter will soon drop class based instantiation of devices. Please make sure client 0x24 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.

input: dreambox remote control (native) as /devices/virtual/input/input0

input: dreambox advanced remote control (native) as /devices/virtual/input/input1

DVB: registering new adapter (dvb0)

i2c i2c-1: This adapter will soon drop class based instantiation of devices. Please make sure client 0x08 gets instantiated by other means. Check 'Documentation/i2c/instantiating-devices' for details.

platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...

input: fro

nt panel as /devices/virtual/input/input2

SGI XFS with security attributes, realtime, no debug enabled

boxmodel: module license 'proprietary' taints kernel.

dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == e1d81150, ra == e1d807e4

Oops[#1]:

CPU: 0 PID: 237 Comm: modprobe Tainted: PF          O    4.0.1 #1

task: af6da5e0 ti: ad99c000 task.ti: ad99c000

$ 0   : 00000000 10008700 e1d81150 00000000

$ 4   : 00000000 10008701 00000001 809497c0

$ 8   : ad99dfe0 00008700 fffffffc 00000118

$12   : 00000000 00000000 00000000 00000000

$16   : 80061ff0 e1db06fc 807374e4 00000000

$20   : e1da9c00 00000000 800827cc e1da9d28

$24   : 00000000 80056998                  

$28   : ad99c000 ad99db88 0000001d e1d807e4

Hi    : 000019ea

Lo    : 00000006

epc   : e1d81150 dvb_usb_i2c_init+0x0/0xdc [dvb_usb]

    Tainted: PF          O   

ra    : e1d807e4 dvb_usb_device_init+0x208/0x6f4 [dvb_usb]

Status: 10008703        KERNEL EXL IE 

Cause : 00800008

BadVA : 00000000

PrId  : 0002a065 (Broadcom BMIPS4380)

Modules linked in: dvb_usb_cxusb(+) dib0070 dvb_usb boxmodel(PO) xfs libcrc32c formuler3(OF) formuler3_3(O) formuler3_2(O) formuler3_1(O)

Process modprobe (pid: 237, threadinfo=ad99c000, task=af6da5e0, tls=77402490)

Stack : af492038 e1da9804 e1db0710 00000000 e1da9f10 00000000 aff8f468 aff8f4c4

          00000004 10008701 8038bc20 e1da9f10 e1da9cf4 5249349c e1d805dc e1db06fc

          e1db0000 aff9be00 e1da9ad0 aff9be00 e1da9cf4 00000000 0000001d e1da6324

          10008701 00000000 aff20400 804d721c e1db06fc aff8f400 e1da9ad0 aff9be20

          e1da9a9c aff8f468 aff8f400 804e7d10 80950000 808b7080 e1db0710 803ee6d0

          ...

Call Trace:

[<e1d81150>] dvb_usb_i2c_init+0x0/0xdc [dvb_usb]

[<e1d807e4>] dvb_usb_device_init+0x208/0x6f4 [dvb_usb]

[<e1da6324>] cxusb_probe+0x214/0x224 [dvb_usb_cxusb]

[<804e7d10>] usb_probe_interface+0x1dc/0x2bc

[<803eed9c>] driver_probe_device+0xbc/0x2fc

[<803ef0fc>] __driver_attach+0xb

c/0xc4

[<803eceac>] bus_for_each_dev+0x6c/0xb4

[<803ee410>] bus_add_driver+0x17c/0x23c

[<803ef890>] driver_register+0x84/0x12c

[<804e6044>] usb_register_driver+0x88/0x1a4

[<8000158c>] do_one_initcall+0xe8/0x25c

[<80737680>] do_init_module+0x70/0x1c8

[<8009e9f4>] load_module+0x1f94/0x22f8

[<8009ef9c>] SyS_finit_module+0x9c/0xbc

[<80015334>] handle_sys+0x134/0x158

 

 

Code: 00001025  00000000  00000000 <8c820000> 30420001  10400024  00000000  27bdffe0  afb00014 

---[ end trace 6e16841706090a73 ]---

__clk_enable: network [1]

__clk_enable: enet [1]

bcm7552_pm_genet_enable 00

NET: Registered protocol family 10

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

bcmgenet bcmgenet.0 eth0: Link is Down

bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

root@formuler3:~# 

cat /proc/bus/nim_sockets

 

 

NIM Socket 0:

        Type: DVB-S2

        Name: BCM7346 (internal)

        Has_Outputs: no

        Internally_Connectable: 0

        Frontend_Device: 0

        I2C_Device: 1

root@formuler3:~# 

[WTE]

Finally, your device is recognized. As I said the device crash with a kernel error.

This is report to linux developers and hope the problem with the older mipsel devices will been solved soon.

[Marchella]

WTE, Thank you for your help and a question of who will carry this problem to the developers ....

Edited by marshella, 10 April 2016 - 03:32.

[nikolasi]

 

t230 t220 t220a working on PLI solo2 duo2 solose without any problems

[WTE]

Yes, it works on quite a few boxes.

 

There is a kernel problem with BCM362 and BCM7358 chipset. Hope with a new kernel update it will been fixed.

[Vitaly_k]

I have problem with Geniatech-T230 on Vu+ Zero.

I use  drivers repacked from Solo2 (change 'vusolo2' to 'vuzero' in CONTROL file) - http://zalil.su/1564869

Installation of drivers is successful:

Spoiler

Installing enigma2-plugin-firmware-t230 (0.1-r0) on root.

Installing kernel-module-dib0070 (1:3.13.5-r7.5) on root.

Installing kernel-module-dib7000p (1:3.13.5-r7.5) on root.

Installing kernel-module-dibx000-common (1:3.13.5-r7.5) on root.

Package kernel-module-dibx000-common (1:3.13.5-r7.5) installed in root is up to date.

Installing kernel-module-dvb-usb-cxusb (1:3.13.5-r7.5) on root.

Installing kernel-module-dvb-usb (1:3.13.5-r7.5) on root.

Package kernel-module-dvb-usb (1:3.13.5-r7.5) installed in root is up to date.

Installing kernel-module-i2c-mux (1:3.13.5-r7.5) on root.

Installing kernel-module-si2157 (1:3.13.5-r7.5) on root.

Installing kernel-module-si2168 (1:3.13.5-r7.5) on root.

Configuring kernel-module-si2157.

Configuring kernel-module-i2c-mux.

Configuring kernel-module-si2168.

Configuring kernel-module-dibx000-common.

Configuring kernel-module-dvb-usb.

Configuring kernel-module-dib0070.

Configuring kernel-module-dib7000p.

Configuring kernel-module-dvb-usb-cxusb.

Configuring enigma2-plugin-firmware-t230.

 

But stick do not work. There are no DVB-C/T2 tuners.

Diagnostic info (dmesg):

Spoiler

loop: module loaded

ahci strict-ahci.0: can't get clock

__clk_enable: sata [1]

ahci strict-ahci.0: SSS flag set, parallel bus scan disabled

ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode

ahci strict-ahci.0: flags: ncq sntf stag clo slum part 

scsi0 : ahci_platform

scsi1 : ahci_platform

ata1: FORCE: PHY spd limit set to 1.5Gbps

ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87

ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87

brcmstb_nand: NAND controller driver is loaded

__clk_enable: network [1]

__clk_enable: enet [1]

bcm7552_pm_genet_enable 00

bcmgenet: configuring instance #0 for internal PHY

bcmgenet bcmgenet.0 eth0: link down

__clk_disable: enet [0]

bcm7552_pm_genet_disable 00

__clk_disable: network [0]

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

__clk_enable: usb [1]

bcm7552_pm_usb_enable 00

ehci-brcm ehci-brcm.0: Broadcom STB EHCI

ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1

ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300

ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

ohci-brcm ohci-brcm.0: Broadcom STB OHCI

ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2

ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

usbcore: registered new interface driver usb-storage

mousedev: PS/2 mouse device common for all mice

i2c /dev entries driver

IR NEC protocol handler initialized

IR RC5(x) protocol handler initialized

IR RC6 protocol handler initialized

IR JVC protocol handler initialized

IR Sony protocol handler initialized

IR RC5 (streamzap) protocol handler initialized

IR SANYO protocol handler initialized

ata1: SATA link down (SStatus 0 SControl 310)

IR MCE Keyboard/mouse protocol handler initialized

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright© Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

hidraw: raw HID events driver © Jiri Kosina

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

TCP: cubic registered

NET: Registered protocol family 17

Key type dns_resolver registered

PM: CP0 COUNT/COMPARE frequency does not depend on divisor

EBI CS0: setting up NAND flash (primary)

NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix H27U2G8F2CTR-BC)

NAND device: 256MiB, SLC, page size: 2048, OOB size: 64

NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix H27U2G8F2CTR-BC)

NAND device: 256MiB, SLC, page size: 2048, OOB size: 64

brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC

Bad block table found at page 131008, version 0x01

Bad block table found at page 130944, version 0x01

Creating 4 MTD partitions on "brcmnand.0":

0x000002100000-0x000010000000 : "rootfs"

0x000002100000-0x000010000000 : "rootfs(redundant)"

0x000000200000-0x000000900000 : "kernel"

0x000000900000-0x000000a00000 : "mac"

UBI: attaching mtd0 to ubi0

ata2: SATA link down (SStatus 0 SControl 300)

usb 1-1: new high-speed USB device number 2 using ehci-brcm

usb 1-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409

random: nonblocking pool is initialized

UBI: scanning is finished

UBI: attached mtd0 (name "rootfs", size 223 MiB) to ubi0

UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

UBI: VID header offset: 2048 (aligned 2048), data offset: 4096

UBI: good PEBs: 1780, bad PEBs: 4, corrupted PEBs: 0

UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

UBI: max/mean erase counter: 11/6, WL threshold: 4096, image sequence number: 1647056000

UBI: available PEBs: 0, total reserved PEBs: 1780, PEBs reserved for bad PEB handling: 36

UBI: background thread "ubi_bgt0d" started, PID 52

ALSA device list:

  No soundcards found.

UBIFS: parse sync

UBIFS: background thread "ubifs_bgt0_0" started, PID 55

UBIFS: mounted UBI device 0, volume 0, name "rootfs"

UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

UBIFS: FS size: 219541504 bytes (209 MiB, 1729 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

UBIFS: reserved for root: 0 bytes (0 KiB)

UBIFS: media format: w4/r0 (latest is w4/r0), UUID D959CB2A-5F77-4267-8D5D-CE0088738658, small LPT model

VFS: Mounted root (ubifs filesystem) on device 0:12.

devtmpfs: mounted

Freeing unused kernel memory: 216K (8073a000 - 80770000)

procmk_init

dvb_bcm7362: module license 'Proprietary' taints kernel.

Disabling lock debugging due to kernel taint

DVB: registering new adapter (_vuplus_zero_)

bcm7362: hotplug_callback(): 

Hotplug - status.connected 1:0:0

bcm7362: hotplug_callback(): 

Hotplug - connecting HDMI to display 0xe

[GP]:brcm_pwm_init

 

brcm_demux_init: $Id: bcm_demux.c,v 0.7 $

bcm7362: hotplug_callback(): 

Hotplug - status.connected 1:1:2

[MPVR]: >> misc_pvr_init

[VID]: 6bcm7335_video_init

[AUD]: 6bcm7335_audio_init

BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7362 FE)...

input: dreambox advanced remote control (native) as /devices/virtual/input/input0

[LCD]: registered

0:0

[DFP]: registered dbox fp

[SC]: registered sci0

system_time_set wakeup mode get 

system_time_set wakeup mode get 0xc4

fpga update driver loaded

dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.

dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (Mygica T230 DVB-T/T2/C)

i2c i2c-3: Added multiplexed i2c bus 4

si2168 3-0064: Silicon Labs Si2168 successfully attached

CPU 1 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 00000000

Oops[#1]:

CPU: 1 PID: 190 Comm: modprobe Tainted: P           O 3.13.5 #1

task: af71c490 ti: af4f4000 task.ti: af4f4000

$ 0   : 00000000 10008b00 00000000 00010000

$ 4   : af6fa7c8 00000017 00000001 ffff00fe

$ 8   : af4f5fe0 00008b00 fffffffc 00000001

$12   : 00000080 ffffff00 004bc4e0 0044e010

$16   : 00000001 80700000 80780000 00000006

$20   : 10008b08 802f0000 e12e0000 00000001

$24   : 000000fc 800110d0                  

$28   : af4f4000 af4f5818 00000000 00000000

Hi    : 00000001

Lo    : e716d300

epc   : 00000000   (null)

    Tainted: P           O

ra    : 00000000   (null)

Status: 10008b03 KERNEL EXL IE 

Cause : 00800008

BadVA : 00000000

PrId  : 0002a065 (Broadcom BMIPS4380)

Modules linked in: si2157 si2168 i2c_mux dvb_usb_cxusb(+) dib0070 dvb_usb dib7000p dibx000_common fpga_directc(PO) brcmfb(O) dvb_bcm7362(PO) procmk(O)

Process modprobe (pid: 190, threadinfo=af4f4000, task=af71c490, tls=771db6a0)

Stack : 00000020 af4f58d0 00000000 8033da80 000000d5 00000001 806ffe08 807293c0

 10008b01 00000000 00000000 800a2984 00000178 af4f58d0 af6fa7e0 802f7ad0

 af6fa7f8 af4f58c0 00000001 806f0000 fffb8c0b fffffff5 00600100 adc0ae00

 af4f5b84 80423db4 00000000 80345b58 8077e3d4 0000001f af72a000 af66c000

 00000001 00000001 af4f5970 fffffff5 00000001 e1426030 af6fa7e0 00000000

 ...

Call Trace:

[<8033da80>] mem32_serial_out+0x0/0x20

[<800a2984>] get_page_from_freelist+0x1d0/0x6ac

[<802f7ad0>] arch_local_irq_restore+0x20/0x30

[<80423db4>] __i2c_transfer+0x90/0xc8

[<80345b58>] create_syslog_header+0xbc/0x1c0

[<e1426030>] si2168_select+0x64/0xd0 [si2168]

[<e141c060>] i2c_mux_master_xfer+0x60/0xa4 [i2c_mux]

[<8030c090>] atomic64_read+0x60/0x84

[<8030c090>] atomic64_read+0x60/0x84

[<80423db4>] __i2c_transfer+0x90/0xc8

[<80420000>] evdev_connect+0x10c/0x234

[<80424690>] i2c_transfer+0x7c/0xc0

[<80424770>] i2c_master_recv+0x44/0x5c

[<801512ec>] __sysfs_add_one+0x84/0x184

[<e142e18c>] si2157_cmd_execute+0x10c/0x158 [si2157]

[<801514e0>] sysfs_add_one+0x1c/0x60

[<e142e874>] si2157_probe+0x9c/0x168 [si2157]

[<801523c4>] sysfs_do_create_link_sd.isra.2+0x100/0x348

[<e142e7d8>] si2157_probe+0x0/0x168 [si2157]

[<80424040>] i2c_device_probe+0x80/0xf0

[<8034a810>] driver_probe_device+0xb0/0x2d0

[<8034aa30>] __device_attach+0x0/0x64

[<805b0bb4>] klist_next+0x48/0x188

[<8034aa60>] __device_attach+0x30/0x64

[<8034aa30>] __device_attach+0x0/0x64

[<803488bc>] bus_for_each_drv+0x68/0xb0

[<802ed59c>] kobject_uevent_env+0x110/0x51c

[<80055088>] __blocking_notifier_call_chain+0x60/0x88

[<8034a714>] device_attach+0xbc/0xf0

[<80349b90>] bus_probe_device+0xa0/0xdc

[<803479a0>] device_add+0x4cc/0x5d0

[<80346050>] dev_set_name+0x24/0x30

[<802f1df4>] strlcpy+0x0/0x84

[<80090fc8>] try_module_get+0x0/0x58

[<804258d4>] i2c_new_device+0x184/0x1b8

[<80425750>] i2c_new_device+0x0/0x1b8

[<80425750>] i2c_new_device+0x0/0x1b8

[<802f78e0>] memset+0x0/0x1c

[<8004394c>] __request_module+0x0/0x308

[<e12daf00>] cxusb_mygica_t230_frontend_attach+0x1e0/0x2c8 [dvb_usb_cxusb]

[<8043a8e4>] dvb_register_device+0x210/0x318

[<e12b7610>] dvb_usb_fe_sleep+0x0/0x80 [dvb_usb]

[<e12b7690>] dvb_usb_fe_wakeup+0x0/0x8c [dvb_usb]

[<80440000>] dvb_ca_en50221_thread_update_delay+0x88/0xf4

[<e12b7b04>] dvb_usb_adapter_frontend_init+0xe8/0x1d8 [dvb_usb]

[<805b50b0>] printk+0x38/0x44

[<805b5078>] printk+0x0/0x44

[<e12b69b4>] dvb_usb_device_init+0x390/0x6fc [dvb_usb]

[<804262e0>] __process_new_adapter+0x0/0x8

[<e12b6624>] dvb_usb_device_init+0x0/0x6fc [dvb_usb]

[<e12da25c>] cxusb_probe+0x214/0x224 [dvb_usb_cxusb]

[<803e8edc>] usb_unlocked_disable_lpm+0x38/0x58

[<803f9330>] usb_probe_interface+0x1f0/0x300

[<8034a164>] driver_sysfs_add+0x78/0xac

[<8034a810>] driver_probe_device+0xb0/0x2d0

[<8034aa94>] __driver_attach+0x0/0xc4

[<803f8930>] usb_device_match+0x5c/0xa0

[<8034ab50>] __driver_attach+0xbc/0xc4

[<805b69f4>] schedule_timeout+0x1b4/0x20c

[<8034aa94>] __driver_attach+0x0/0xc4

[<803487f8>] bus_for_each_dev+0x6c/0xb4

[<805b0f90>] klist_add_tail+0x24/0x70

[<800461f4>] __queue_work+0x150/0x2cc

[<80349e84>] bus_add_driver+0x17c/0x244

[<8034b230>] driver_find+0x1c/0x48

[<8034b2e0>] driver_register+0x84/0x12c

[<803f766c>] usb_register_driver+0x88/0x1a4

[<e12e6000>] cxusb_driver_init+0x0/0x24 [dvb_usb_cxusb]

[<800015b8>] do_one_initcall+0x138/0x1e0

[<800a401c>] free_hot_cold_page+0x34/0x1f8

[<800d1a54>] remove_vm_area+0x88/0xcc

[<800d1b58>] __vunmap+0xc0/0x128

[<80094644>] load_module+0x1d50/0x2248

[<80091074>] unknown_module_param_cb+0x0/0x68

[<800e6a64>] kernel_read+0x2c/0x40

[<80092250>] copy_module_from_fd.isra.51+0x13c/0x1d4

[<800c81a4>] vma_merge+0x1a8/0x2ec

[<80094cb0>] SyS_finit_module+0x88/0xa8

[<80011334>] handle_sys+0x134/0x158

Code: (Bad address in epc)

---[ end trace 81e60fdeaf49c418 ]---

 

lsmod:

Spoiler

oot@vuzero:~# lsmod
Module                  Size  Used by
ipv6                  331884  24
rt2800usb              17562  0
rt2800lib              78027  1 rt2800usb
crc_ccitt               1067  1 rt2800lib
rt2x00usb              10274  1 rt2800usb
rt2x00lib              42623  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              304949  3 rt2x00lib,rt2x00usb,rt2800lib
si2157                  3908  0
si2168                  6904  1
i2c_mux                 1846  1 si2168
dvb_usb_cxusb          44989  1
dib0070                 8187  1 dvb_usb_cxusb
dvb_usb                17866  1 dvb_usb_cxusb
dib7000p               28126  1 dvb_usb_cxusb
dibx000_common          7102  1 dib7000p
fpga_directc             493  0
brcmfb                  1590  2
dvb_bcm7362          6639860  33 brcmfb
procmk                  1668  1 dvb_bcm7362

Edited by Vitaly_k, 5 June 2016 - 18:05.

[red007]

Yes, it works on quite a few boxes.

 

There is a kernel problem with BCM362 and BCM7358 chipset. Hope with a new kernel update it will been fixed.

 

Can You tell exactly what kernel problem?

Anybody else know how to get work t230 on vu zero?

[Marchella]

Yes, it works on quite a few boxes.

 

There is a kernel problem with BCM362 and BCM7358 chipset. Hope with a new kernel update it will been fixed.

it seems already and transferred to a new kernel but a problem with GENIATECH MyGica USB TV Stick T230/T220A DVB-T2 Tuner both was and remains, can eat other options as that to adjust this stick?

[Pr2]

I have the geniatech T230 working on my mutant HD2400
installed
kernel-module-dvb-usb-cxusb
firmware-dvb-fe-si2168
kernel-module-si2157
kernel-module-si2168
 
...

 
Hi,

I just test again the MyGica T230 USB DVB-C/T/T2 stick on my box with OpenPLi 6.x

The package:  firmware-dvb-fe-si2168 no longer exist in the repository.

So you need to install the following packages too:

firmware-dvb-demod-si2168-b40
firmware-dvb-tuner-si2158-a20

So the full list to install is:
 

opkg update && opkg install kernel-module-dvb-usb-cxusb \
kernel-module-si2157 \
kernel-module-si2168 \
firmware-dvb-demod-si2168-b40 \
firmware-dvb-tuner-si2158-a20

Reboot the box after installation.

Based on this:
https://www.linuxtv..../Geniatech_T230

 

Remark:

If you don't install the firmware (so only the kernel modules) your USB stick will be detected and integrated in the OpenPLi menu but it will not work. You will always get no signal.

Pr2

[fennec]

 

I have the geniatech T230 working on my mutant HD2400
installed
kernel-module-dvb-usb-cxusb
firmware-dvb-fe-si2168
kernel-module-si2157
kernel-module-si2168
 
...

 
Hi,

I just test again the MyGica T230 USB DVB-C/T/T2 stick on my box with OpenPLi 6.x

The package:  firmware-dvb-fe-si2168 no longer exist in the repository.

So you need to install the following packages too:

firmware-dvb-demod-si2168-b40
firmware-dvb-tuner-si2158-a20

So the full list to install is:
 

opkg update && opkg install kernel-module-dvb-usb-cxusb \
kernel-module-si2157 \
kernel-module-si2168 \
firmware-dvb-demod-si2168-b40 \
firmware-dvb-tuner-si2158-a20

Reboot the box after installation.

Based on this:
https://www.linuxtv..../Geniatech_T230

 

Remark:

If you don't install the firmware (so only the kernel modules) your USB stick will be detected and integrated in the OpenPLi menu but it will not work. You will always get no signal.

Pr2

 

Hi Pr2

 

I try to install my MyGica T230 USB DVB-C/T/T2 on duo2 with openpli 6.2

 

On my DUO2 with 4 tuners installed 2 sat and 2 TNT

 

but i have error

usb 3-1: new high-speed USB device number 2 using ehci-brcm
usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 188
usb 3-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
brcmnand brcmnand.0: corrected error at 0x1c688e00

i install 

kernel-module-dvb-usb-cxusb 

firmware-dvb-demod-si2168-b40 
firmware-dvb-tuner-si2158-a20

 

But no package 

 

kernel-module-si2157 

kernel-module-si2168

 

Is it normal 

 

Thanks

[planer1903]

Helo all. Tell me if it is possible to add this device to VU + Zero rev.2. Installed on openPli8.0. 

 

Geniatech T230C2

 

Device identifies as idVendor=0572, idProduct=c68a:

 

# journalctl -xb

kernel: usb 1-1.3: new high-speed USB device number 4 using dwc_otg

kernel: usb 1-1.3: New USB device found, idVendor=0572, idProduct=c68a

kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

kernel: usb 1-1.3: Product: EyeTV Stick

kernel: usb 1-1.3: Manufacturer: Geniatech

 

on Windows and Linux Mint (with a kernel of 5.4) - everything is fine.