102 replies to this topic

[finas]

This image solved most of my problems with the current OpenPli 4 and DM8000.

 

The only thing I miss is the Openpli boot image ( the ones with the diferent seasons )

 

Thanks!!!

[pepinoogorino]

There is a no working ssh server in this image:

root@vusolo4k:~# ps w|grep dropbear|grep -v grep

root@vusolo4k:~# opkg update && opkg install dropbear
Package dropbear (2014.66-r1) installed in root is up to date
root@vusolo4k:~# /etc/init.d/dropbear stop
Stopping Dropbear SSH server: no /usr/sbin/dropbear found; none killed
root@vusolo4k:~# /etc/init.d/dropbear start
Starting Dropbear SSH server: Segmentation fault
root@vusolo4k:~# ls -al /etc/dropbear/
drwxr-xr-x    2 root     root          4096 Apr  5 19:16 .
drwxr-xr-x   35 root     root          4096 May  4 01:11 ..

Edited by pepinoogorino, 4 May 2016 - 09:08.

[MastaG]

pepinoogorino: try opkg install openssh-server

[pepinoogorino]

There is not openssh-server, but it is openssh-sshd.
After opkg remove --force-remove dropbear (conflict with openssh-sshd) and

enable PermitRootLogin in sshd_config sshd working, but... it's only workaround.

Could you fix dropbear, please? It's lightweight and basic solution in the standard OpenPLi images.

[MastaG]

Yes I'll look into it for you.
Next release will hopefully be this week.

[dreamboxco]

Can we make a online update?

[buc61b]

hello guys, i have upgradet this image on dm500hd ferrari clone and my box stucked on reboot...

 

cant acces anymore on my previoslu ip adres of box....

 

can someone help me what to do...

[goldeneye]

These images are meant for original boxes only...

[buc61b]

Ok. Just thought maybe now somehow could i fix the bug.


Sent from my iPhone using Tapatalk

[habab]

Ok. Just thought maybe now somehow could i fix the bug.


Sent from my iPhone using Tapatalk

Koji debil.

[goldeneye]

Just install a Ferrari compatible image... If you can still access the box via *stop* mode you can reflash using LAN. If not, just use DreamUp and use serial flash method....

[gklaas]

Hi, is it possibble to make an image with gstreamer in it for Dreambox 7020HD.

 

Regards Gerard

[osicam]

Hello

 

I installed your version with Gstream 1.6.2 on my vuultimo last week and iptv was not working. Sound started but image only started few seconds later and was also not fluid.

 

Do you think this version would fix the problem and so I have to give it a try ?

 

Currently I use oprnpli 4.0 and IPTV works fine on some channels but have delay between image and sound on other and fluidity problem on others.

It is not due to stream channels as everythong is fine on my ipad. I only have problem with the vu ultimo

[Viktor_b]

Does anybody know the  links for et9x00 feed. The currently stored in opkg http://jam.japhar.co...Li-4/pli/et9x00 are not working.

I have seen that it was some link change for DM800 but was unable to find the same for xtrend.

 

Thanks

[Dimmie]

japhar = images for clones. Here is only support for original/genuine. You should contact japhar team for this question.

[Viktor_b]

Thanks,

I have downloaded the image from the first post from MastaG.

 

There are all the feed links forwarding to Japhar. This I though I can ask here.

If I am replacing the feeds with linkd  from openPli, I get some dependencies error.

[Dimmie]

Thanks,

I have downloaded the image from the first post from MastaG.

 

There are all the feed links forwarding to Japhar. This I though I can ask here.

If I am replacing the feeds with linkd  from openPli, I get some dependencies error.

 

Of course, feeds from OpenPLI are for genuine images.

[Panther-6]

Hello,

 

can you please make an Image for my Edision OS mini plus?

 

Regards Panther6

[athoik]

There is an image here: https://openpli.org/...sion/OS mini +/

[Panther-6]

There is an image here: https://openpli.org/...sion/OS mini +/

No thank you. I need an Image with Gstreamer minimum 1.9.0.1 and not with 0.1.

 

Most of my IPTV-channels don't work with Gstreamer 0.1