Jump to content


Photo

-Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4


  • This topic is locked This topic is locked
102 replies to this topic

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #81 finas

  • Senior Member
  • 26 posts

0
Neutral

Posted 30 April 2016 - 14:40

This image solved most of my problems with the current OpenPli 4 and DM8000.

 

The only thing I miss is the Openpli boot image ( the ones with the diferent seasons )

 

Thanks!!!



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #82 pepinoogorino

  • Senior Member
  • 65 posts

+2
Neutral

Posted 4 May 2016 - 09:07

There is a no working ssh server in this image:
root@vusolo4k:~# ps w|grep dropbear|grep -v grep

root@vusolo4k:~# opkg update && opkg install dropbear
Package dropbear (2014.66-r1) installed in root is up to date
root@vusolo4k:~# /etc/init.d/dropbear stop
Stopping Dropbear SSH server: no /usr/sbin/dropbear found; none killed
root@vusolo4k:~# /etc/init.d/dropbear start
Starting Dropbear SSH server: Segmentation fault
root@vusolo4k:~# ls -al /etc/dropbear/
drwxr-xr-x    2 root     root          4096 Apr  5 19:16 .
drwxr-xr-x   35 root     root          4096 May  4 01:11 ..

Edited by pepinoogorino, 4 May 2016 - 09:08.


Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #83 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 4 May 2016 - 09:48

pepinoogorino: try opkg install openssh-server



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #84 pepinoogorino

  • Senior Member
  • 65 posts

+2
Neutral

Posted 4 May 2016 - 10:31

There is not openssh-server, but it is openssh-sshd.
After opkg remove --force-remove dropbear (conflict with openssh-sshd) and

enable PermitRootLogin in sshd_config sshd working, but... it's only workaround.

Could you fix dropbear, please? It's lightweight and basic solution in the standard OpenPLi images.


Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #85 MastaG

  • Senior Member
  • 1,531 posts

+118
Excellent

Posted 4 May 2016 - 12:29

Yes I'll look into it for you.
Next release will hopefully be this week.

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #86 dreamboxco

  • Senior Member
  • 321 posts

+4
Neutral

Posted 10 May 2016 - 21:06

Can we make a online update?

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #87 buc61b

  • Senior Member
  • 154 posts

+1
Neutral

Posted 11 May 2016 - 01:20

hello guys, i have upgradet this image on dm500hd ferrari clone and my box stucked on reboot...

 

cant acces anymore on my previoslu ip adres of box....

 

can someone help me what to do...



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #88 goldeneye

  • Senior Member
  • 1,030 posts

+14
Neutral

Posted 11 May 2016 - 09:58

These images are meant for original boxes only...

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #89 buc61b

  • Senior Member
  • 154 posts

+1
Neutral

Posted 11 May 2016 - 10:18

Ok. Just thought maybe now somehow could i fix the bug.


Sent from my iPhone using Tapatalk

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #90 habab

  • Member
  • 4 posts

0
Neutral

Posted 11 May 2016 - 11:01

Ok. Just thought maybe now somehow could i fix the bug.


Sent from my iPhone using Tapatalk

Koji debil. :D



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #91 goldeneye

  • Senior Member
  • 1,030 posts

+14
Neutral

Posted 11 May 2016 - 11:13

Just install a Ferrari compatible image... If you can still access the box via *stop* mode you can reflash using LAN. If not, just use DreamUp and use serial flash method....

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #92 gklaas

  • Member
  • 6 posts

0
Neutral

Posted 15 May 2016 - 19:01

Hi, is it possibble to make an image with gstreamer in it for Dreambox 7020HD.

 

Regards Gerard



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #93 osicam

  • Member
  • 15 posts

0
Neutral

Posted 15 June 2016 - 21:45

Hello

 

I installed your version with Gstream 1.6.2 on my vuultimo last week and iptv was not working. Sound started but image only started few seconds later and was also not fluid.

 

Do you think this version would fix the problem and so I have to give it a try ?

 

Currently I use oprnpli 4.0 and IPTV works fine on some channels but have delay between image and sound on other and fluidity problem on others.

It is not due to stream channels as everythong is fine on my ipad. I only have problem with the vu ultimo



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #94 Viktor_b

  • Member
  • 9 posts

0
Neutral

Posted 20 January 2017 - 23:34

Does anybody know the  links for et9x00 feed. The currently stored in opkg http://jam.japhar.co...Li-4/pli/et9x00 are not working.

I have seen that it was some link change for DM800 but was unable to find the same for xtrend.

 

Thanks



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #95 Dimmie

  • Senior Member
  • 2,338 posts

+33
Good

Posted 21 January 2017 - 01:14

japhar = images for clones. Here is only support for original/genuine. You should contact japhar team for this question.



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #96 Viktor_b

  • Member
  • 9 posts

0
Neutral

Posted 22 January 2017 - 10:19

Thanks,

I have downloaded the image from the first post from MastaG.

 

There are all the feed links forwarding to Japhar. This I though I can ask here.

If I am replacing the feeds with linkd  from openPli, I get some dependencies error.



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #97 Dimmie

  • Senior Member
  • 2,338 posts

+33
Good

Posted 29 January 2017 - 17:02

Thanks,

I have downloaded the image from the first post from MastaG.

 

There are all the feed links forwarding to Japhar. This I though I can ask here.

If I am replacing the feeds with linkd  from openPli, I get some dependencies error.

 

Of course, feeds from OpenPLI are for genuine images.



Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #98 Panther-6

  • Senior Member
  • 66 posts

+2
Neutral

Posted 29 January 2017 - 19:58

Hello,

 

can you please make an Image for my Edision OS mini plus?

 

Regards Panther6


VU+ Uno 4K

Edision OS mini


Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #99 athoik

  • PLi® Core member
  • 8,458 posts

+327
Excellent

Posted 29 January 2017 - 20:04

There is an image here: https://openpli.org/...sion/OS mini +/
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

Re: -Unofficial- Gstreamer 1.9.0.1 images 2016-04 V2 -based on- OpenPLi 4 #100 Panther-6

  • Senior Member
  • 66 posts

+2
Neutral

Posted 30 January 2017 - 08:31

There is an image here: https://openpli.org/...sion/OS mini +/

No thank you. I need an Image with Gstreamer minimum 1.9.0.1 and not with 0.1.

 

Most of my IPTV-channels don't work with Gstreamer 0.1


VU+ Uno 4K

Edision OS mini



9 user(s) are reading this topic

0 members, 9 guests, 0 anonymous users