184 replies to this topic

[MastaG]

Oh I'll probably post them next week :-)

[kadiro1312]

good news Mr MastaG     .

[jserv]

hello there.i watch in my computer every sunday the live program from radio stad den haad that starts at 8 pm.the stream is pseudo01.hddn.com/vod/demo.flowplayervod/flowplayer-700.flv and http://www.video-str.../flow/rsdh.html for mobiles.i tried to make the channel viewed in channel list like this : #SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//www.video-streams.nl/flow/rsdh.html:Radio Stad Den Haag
#DESCRIPTION Radio Stad Den Haag and #SERVICE 4097:0:1:0:0:0:0:0:0:0:http%3a//pseudo01.hddn.com/vod/demo.flowplayervod/flowplayer-700.flv:Radio Stad Den Haag and i didn't make it work.also i make it for m3u list like this : #EXTINF:0,Radio Stad Den Haaghttp://www.video-str.../flow/rsdh.html and also not work.is it possible to watch it or not?

Edited by jserv, 5 June 2016 - 13:06.

[adi22]

hi,

i did not get HBBTV on my Vusolo2 to work:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-hbbtv:
 *      gstreamer (>= 0.10.36.1+git12092+1bcabb9) *     libc6 (>= 2.20) *       libgstvideo-0.10-0 (>= 0.10.36.1+git10186+bdb3316)
 *    libjpeg8 (>= 8d) *
root@vusolo2:~#

 

any idea?

 

thanks

adi22

[adi22]

ok,

if i go via the blue button, i can see some pages...but not the HBBTV start-bar on every site.

 

same if i press the red button: in display it shows "RTL start-bar" (in german startseite) but nothing happens.

 

any idea, how to fix?

 

thanks, adi22

[satwalker]

good work/news thx to you Mr MastaG

Edited by satwalker, 8 June 2016 - 11:48.

[buc61b]

MastaG, i v installed tsmedia but it wont appear on this image?!

Iptvolayer is ok...

I supose i need to put some telnet comands or?




Sent from my iPhone using Tapatalk

[nml]

Fantastic work Masta G, tested on solo 2 a great improvement with streaming very good image.

 

So I decided to put it on the Zero and noticed there was no pau download available, i installed it manually but recording and pause do not work but streaming from the solo 2 works fine.

 

I am going to reinstall the image but first I thought I would check and see if anyone else had installed on the Zero, or is pau incompatible with this image?

[nml]

@MastaG, I assume that you are aware of the pau problem on the Zero with the MastaG images with pau not being available in the feeds.

 

At the moment I have yesterdays OpenPLI 4 build on the box but if it helps I will reinstall MastaG image tomorrow and post a debug log.

 

Thanks again for all your hard work.

[nml]

Fantastic work Masta G, tested on solo 2 a great improvement with streaming very good image.

 

So I decided to put it on the Zero and noticed there was no pau download available, i installed it manually but recording and pause do not work but streaming from the solo 2 works fine.

 

I am going to reinstall the image but first I thought I would check and see if anyone else had installed on the Zero, or is pau incompatible with this image?

 

Debug log attached as promised.

Attached Files

•  Debug Zero.txt   6.64KB   8 downloads

[mx3L]

@nml

 

pau for vuzero is in 3rd-party feeds for vuzero, it has different hashsum as pau for vusolo2 so you shouldn't install pau for vusolo2 on vuzero.

3rd-party feeds for machines should be enabled also for private images, so I guess you've some problem in /etc/opkg/.

 

Here is your pau, directly from openpli feeds, I put it in dropbox, since I'm not sure if openpli would be happy if I expose they feed link.

 

https://dl.dropboxus...0-r0_vuzero.ipk

[nml]

@nml

 

pau for vuzero is in 3rd-party feeds for vuzero, it has different hashsum as pau for vusolo2 so you shouldn't install pau for vusolo2 on vuzero.

3rd-party feeds for machines should be enabled also for private images, so I guess you've some problem in /etc/opkg/.

 

Here is your pau, directly from openpli feeds, I put it in dropbox, since I'm not sure if openpli would be happy if I expose they feed link.

 

https://dl.dropboxus...0-r0_vuzero.ipk

 

 

Thank you mx3L but unfortunately it did not work the same problem so I decidedto compare some file with OpenPli installed and then MastaG.  On both images the opkg.conf was the same evrything hashed out apart from  "dest root /
option lists_dir /var/lib/opkg.

However in /var/lib/opkg/info the OpenPli image has   870 entries    MastaG 933 entries but doesn't have 6 entries for pau  and the following         3rd-party-feed-configs.confiles,     3rd-party-feed-configs.control and            3rd-party-feed-configs  list file. Could be more not sure.

 

If the 2 info folders would help I can upload.

 

Thanks again.                            

[mx3L]

Don't know then, recording should work after you installed pau.

So make sure you installed pau properly, try:

opkg --force-reinstall install enigma2-plugin-extensions-pau_1.0-r0_vuzero.ipk

[nml]

@mx3L, Thanks for that here is the result.

 

 

root@vuzero:~# opkg --force-reinstall install enigma2-plugin-extensions-pau_1.0-

r0_vuzero.ipk

Collected errors:

 * wfopen: enigma2-plugin-extensions-pau_1.0-r0_vuzero.ipk: No such file or directory                                                                                       .

 * pkg_init_from_file: Failed to extract control file from enigma2-plugin-extensions-pau_1.0-r0_vuzero.  ipk                                                                                     .

root@vuzero:~#

[nml]

Just realised there is no edit button here are the correct results after renaming ipk to pau.ipk

 

root@vuzero:~# cd /tmp
root@vuzero:/var/volatile/tmp# opkg --force-reinstall install pau.ipk
Installing enigma2-plugin-extensions-pau (1.0-r0) on root.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-pau:
 *      libc6 (>= 2.20) *
 * opkg_install_cmd: Cannot install package enigma2-plugin-extensions-pau.

[mx3L]

looks like you've some old libc in there, you can force installation despite failed dependencies by:

opkg --force-depends --force-reinstall install pau.ipk

the try to run pau

[osicam]

Hello I need help with EPG for IPTV

 

EPG is not displayed when displaying the channel list for IPTV but well for satelitte

 

It only displays info about next program but not about  curent program

 

It is strange because if i am on a iptv channel and click pn EPG I see the next 5 dats progeram so it is only an issue on channel list display

[osicam]

I forgot to specify in my previous post that I am using exteplayer3 as default player for media

[nml]

looks like you've some old libc in there, you can force installation despite failed dependencies by:

opkg --force-depends --force-reinstall install pau.ipk

the try to run pau

 

Thanks mx3L yes that works results below.

 

 

root@vuzero:~# cd /tmp
root@vuzero:/var/volatile/tmp# opkg --force-depends --force-reinstall install pa
u.ipk
Installing enigma2-plugin-extensions-pau (1.0-r0) on root.
update-rc.d: /etc/init.d/pau.sh exists during rc.d purge (continuing)
Removing any system startup links for pau.sh ...
Configuring enigma2-plugin-extensions-pau.
Adding system startup for /etc/init.d/pau.sh.
Running pau...success
done.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-pau:
* libc6 (>= 2.20) *

 

Still showing the libc6 error though so I decided to try a new install for the file and as you can see below the file is 2.19 and up to date, so I tried a forced reinstall and it reinstalled 2.19 from the japhar feeds. As I said previously it all works on OpenPli 4 so does it need at least a 2.20 file on the japhar feed?

root@vuzero:~# opkg install libc6
Package libc6 (2.19-r0) installed in root is up to date.
root@vuzero:~#
root@vuzero:~# opkg --force-reinstall install libc6
Downloading http://jam.japhar.co....0_mips32el.ipk.
Reinstalling libc6 (2.19-r0) on root.
Configuring libc6.
root@vuzero:~#



 

[mx3L]

Good to hear, on openpli4 master-next:

root@vusolose:~# opkg list_installed|grep libc6
libc6 - 2.23-r0

In order to avoid showing this installation error, yes it needs at least libc6-2.20.