I know the status for the solo4k at least, not sure about the hd51 at the moment. For hevc playback using gstreamer on the solo4k, you'll need OpenPLi 5 (which is not yet released).
h265 / HEVC support
Started by aeryn.sun, 12 May 2016 11:32
45 replies to this topic
Re: h265 / HEVC support #21
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 2 August 2016 - 10:19
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: h265 / HEVC support #22
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 2 August 2016 - 10:41
e.g. the Solo 4k has (of course) h264 codec in hardware, otherwise it would not be able to play HD-TV. But: there is no support for h264 encoded file (so other files then TS), so no playback of them.
That box has also no support for VP9, so many streams will not be decoded.
Re: h265 / HEVC support #23
-
- Senior Member
- 27 posts
0
Neutral
Posted 2 August 2016 - 13:32
ATM i have xTrend ET4000 with h264 support (obviously) and i can play all h264 encoded files either by me (handbrake) or by others. I wrote to the manufacturer (http://mutant-digital.net) but i don't expect an answer soon.
ET4000
Re: h265 / HEVC support #24
-
- PLi® Core member
- 70,546 posts
+1,813
Excellent
Posted 2 August 2016 - 13:38
Especially since Mutant doesn't manufacture Xtrends... 
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: h265 / HEVC support #25
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 2 August 2016 - 16:39
ATM i have xTrend ET4000 with h264 support (obviously) and i can play all h264 encoded files either by me (handbrake) or by others.
As is the case with most (all?) HD boxes.
But when a new codec comes out, there are always issues like that. The first UHD TV's didn't even have any h265 codec on board....
Re: h265 / HEVC support #26
-
- Senior Member
- 1,112 posts
+10
Neutral
Posted 2 August 2016 - 17:03
On a H51 dont play this codec MPEG-H part2/HEVC (H.265) (hevc) 1920x800 whit openpli 4.0
VU+ULTIMO4K/HD11/HD530C/HD51/multibox openpli 9.0
Re: h265 / HEVC support #27
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 2 August 2016 - 17:27
e.g. the Solo 4k has (of course) h264 codec in hardware, otherwise it would not be able to play HD-TV. But: there is no support for h264 encoded file (so other files then TS), so no playback of them.
That box has also no support for VP9, so many streams will not be decoded.
I guess you mean h265.
The in OpenPli 4 used Gstreamer 0.10 doesn't support h265 playback. And gstreamer is used for playback of media files like mkv, avi, .... Playback of h265 satellite transmission works as gstreamer is not used for this.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: h265 / HEVC support #28
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 2 August 2016 - 17:37
Nope: I mean h264.
Strange as it may sound: the Solo 4k simply has no support for h264 coded files. That's the price you pay for being a (dearly paying) trendsetting customer.....
Re: h265 / HEVC support #29
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 2 August 2016 - 17:40
But you mean UHD h264 encoded files. Normal 1920x1080 h264 mkv work. Or am I wrong?
Edited by betacentauri, 2 August 2016 - 17:45.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
Re: h265 / HEVC support #30
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 2 August 2016 - 17:46
They don't.
Re: h265 / HEVC support #31
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 2 August 2016 - 17:49
Playing back MKV with h264 encoded 1080i meterial (transcoded from a digital camera) works okay on the 4k. I guess that Rob means that you cannot playback 2160p/i material from files.
Real musicians never die - they just decompose
Re: h265 / HEVC support #32
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 2 August 2016 - 17:50
Not? Hmm. Booting the 4k now...
Real musicians never die - they just decompose
Re: h265 / HEVC support #33
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 2 August 2016 - 17:53
Just tested again, MKV plays fine. Also tried an old experimental DVD rip, also plays.
This 4k runs an as of yet unreleased OpenPLi version ("master-next-milo") so that might make a difference.
This 4k runs an as of yet unreleased OpenPLi version ("master-next-milo") so that might make a difference.
Real musicians never die - they just decompose
Re: h265 / HEVC support #34
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 2 August 2016 - 18:08
Hmmm, I don't have a 4k myself, but I got this info from 'usually very reliable sources'.
But checking that info again I see that I've quoted it wrong. The message should be: "no playback of 4K-files with h264 encoding".
Edited by Rob van der Does, 2 August 2016 - 18:09.
Re: h265 / HEVC support #35
-
- Senior Member
- 1,128 posts
+34
Good
Posted 2 August 2016 - 19:18
Hi Rob,
4K h264 does not work on Solo 4K.
Ralf
Re: h265 / HEVC support #36
-
- Senior Member
- 27 posts
0
Neutral
Posted 3 August 2016 - 08:43
e.g. the Solo 4k has (of course) h264 codec in hardware, otherwise it would not be able to play HD-TV. But: there is no support for h264 encoded file (so other files then TS), so no playback of them.
That box has also no support for VP9, so many streams will not be decoded.
I guess you mean h265.
The in OpenPli 4 used Gstreamer 0.10 doesn't support h265 playback. And gstreamer is used for playback of media files like mkv, avi, .... Playback of h265 satellite transmission works as gstreamer is not used for this.
Aaaaah, thats why 
Ok. So the Gstreamer used by OpenPLi would just have to use a plugin for that. Wouldn't it be easy just to install the libde265 plugin from strukturag? If this cannot be done in the image - for whatever reason - this could be done manually by either selecting the plugin via GUI or via ipkg, right?
ET4000
Re: h265 / HEVC support #37
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 3 August 2016 - 13:49
But checking that info again I see that I've quoted it wrong. The message should be: "no playback of 4K-files with h264 encoding".
Yes that is true and it has been known for some time, it's no big news. There are no issues with h264 on the solo4k whatsoever, both DVB and media.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: h265 / HEVC support #38
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 3 August 2016 - 13:50
I know the status for the solo4k at least, not sure about the hd51 at the moment. For hevc playback using gstreamer on the solo4k, you'll need OpenPLi 5 (which is not yet released).
For someone who mentioned this a few posts ago, yes, so this is also no news.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: h265 / HEVC support #39
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 3 August 2016 - 14:45
But checking that info again I see that I've quoted it wrong. The message should be: "no playback of 4K-files with h264 encoding".
Yes that is true and it has been known for some time, it's no big news. There are no issues with h264 on the solo4k whatsoever, both DVB and media.
Nope, it's not news, but there are issues. There are quite a number of 4k streams encoded with h264, and the 4k doesn't play them. Same story for VP9.
Re: h265 / HEVC support #40
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 3 August 2016 - 16:13
Afaik is there no h265 plugin for gstreamer 0.10 available. The mentioned plugin is for Gstreamer 1.x.
You'll have to wait until OpenPli 5 is released or have to switch to other image.
You'll have to wait until OpenPli 5 is released or have to switch to other image.
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
