Dear all, just wanted to check, is OpenPLi still supporting for this New Zgemma H5 model ? seems like there is no more new firmware since early June but others Zgemma model are still updating... TQ !
Zgemma H5... OpenPLI still supporting ?
Started by DeepImpact, 17 Jun 2016 06:58
22 replies to this topic
Re: Zgemma H5... OpenPLI still supporting ? #2
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 17 June 2016 - 08:32
All hardware present on the homepage is still being supported. I do not know the exact reason why the build for the H5 hasn't been updated for a while. This could be due to a request which has been send to them but unfortunately never has been answered yet.
h5: driver checksum mismatch
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Zgemma H5... OpenPLI still supporting ? #3
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 17 June 2016 - 09:31
Yes indeed, that issue will have to be fixed by Zgemma.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Zgemma H5... OpenPLI still supporting ? #4
-
- Member
- 10 posts
0
Neutral
Posted 17 June 2016 - 13:39
All hardware present on the homepage is still being supported. I do not know the exact reason why the build for the H5 hasn't been updated for a while. This could be due to a request which has been send to them but unfortunately never has been answered yet.
h5: driver checksum mismatch
Yes indeed, that issue will have to be fixed by Zgemma.
Thanks for the clarification Asking this because i'm having problem to grab screenshot from H5 by using browser method (IP Address/grab?format=jpg) and Telnet command as well... i only able to grab OSD screenshot with all Sat data, ECM...etc info but No actually channel picture 
Hoping if there is any new firmware can fix the problem 
Thank you & good day !
Re: Zgemma H5... OpenPLI still supporting ? #5
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 17 June 2016 - 14:21
That is another issue and it needs to be addressed. Problem is that none of us have the exact technical specifications of the SoC hardware. So we rely on some reverse engineering some contributers have done in the past. When new SoC's are being used, the screen grabbing may not work and needs to be fixed. Lately most of the time it's simply adding the new SoC type to the list of "recent" SoC's and it will probably work. Or maybe not. It's guesswork.
*UPDATE*, I just saw that member Athoik already solved this issue:
commit c811ddbe1ff4102a4f2c2852ba47d82754012014
Author: Athanasios Oikonomou <athoik@gmail.com>
Date: Fri May 27 22:46:02 2016 +0300
fix brcm73565 and brcm73625 video grab
based on https://github.com/oe-alliance/aio-grab/commit/5793debfe8f60cc38f035f58c9302a4d2ed2dbaa\
So if you update, it should work.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Zgemma H5... OpenPLI still supporting ? #6
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 17 June 2016 - 16:41
If there was AUTOREV in aio grab bitbake, but apparently there is fixed SRCREV.
This should fix it: https://github.com/O...oe-core/pull/82
This should fix it: https://github.com/O...oe-core/pull/82
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Zgemma H5... OpenPLI still supporting ? #7
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 17 June 2016 - 16:50
I just perform an online update and reboot and test the grab and it still doesn't work.
Always black screen.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Zgemma H5... OpenPLI still supporting ? #8
-
- Member
- 10 posts
0
Neutral
Posted 17 June 2016 - 16:53
That is another issue and it needs to be addressed. Problem is that none of us have the exact technical specifications of the SoC hardware. So we rely on some reverse engineering some contributers have done in the past. When new SoC's are being used, the screen grabbing may not work and needs to be fixed. Lately most of the time it's simply adding the new SoC type to the list of "recent" SoC's and it will probably work. Or maybe not. It's guesswork.
*UPDATE*, I just saw that member Athoik already solved this issue:
commit c811ddbe1ff4102a4f2c2852ba47d82754012014 Author: Athanasios Oikonomou <athoik@gmail.com> Date: Fri May 27 22:46:02 2016 +0300 fix brcm73565 and brcm73625 video grab based on https://github.com/oe-alliance/aio-grab/commit/5793debfe8f60cc38f035f58c9302a4d2ed2dbaa\So if you update, it should work.
Thanks for your help. But the nightly build version (03062016) suppose be newer than the issue date you mentioned in your link right ? Sorry I'm not good in to this
Edited by DeepImpact, 17 June 2016 - 16:54.
Re: Zgemma H5... OpenPLI still supporting ? #9
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 17 June 2016 - 17:35
The update is not available yet, it will be in the next day after the pull request from #6 merged.
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Zgemma H5... OpenPLI still supporting ? #10
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 18 June 2016 - 07:40
If there was AUTOREV in aio grab bitbake, but apparently there is fixed SRCREV.
This should fix it: https://github.com/O...oe-core/pull/82
Yes you are totally right, I sometimes forget. I cherry-picked your patch yesterday, so it should be in now. Thanks!
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Zgemma H5... OpenPLI still supporting ? #11
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 18 June 2016 - 07:41
Quick fix
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Zgemma H5... OpenPLI still supporting ? #12
-
- Member
- 10 posts
0
Neutral
Posted 18 June 2016 - 08:17
The update is not available yet, it will be in the next day after the pull request from #6 merged.
If there was AUTOREV in aio grab bitbake, but apparently there is fixed SRCREV.
This should fix it: https://github.com/O...oe-core/pull/82Yes you are totally right, I sometimes forget. I cherry-picked your patch yesterday, so it should be in now. Thanks!
Thank you very much !!
Re: Zgemma H5... OpenPLI still supporting ? #13
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 18 June 2016 - 09:51
Tested and works?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Zgemma H5... OpenPLI still supporting ? #14
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 18 June 2016 - 16:42
Hi,
Just update and doesn't work.
By the way, OpenWebif need also to be update to recognize properly the Zgemma H.5 for now the type and model are unknown.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Zgemma H5... OpenPLI still supporting ? #15
-
- PLi® Core member
- 70,563 posts
+1,816
Excellent
Posted 18 June 2016 - 17:45
It was changed today, so it will be in tonights image.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Zgemma H5... OpenPLI still supporting ? #16
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 19 June 2016 - 13:05
...
By the way, OpenWebif need also to be update to recognize properly the Zgemma H.5 for now the type and model are unknown.
...
Hi,
Many thanks to Tech that publish the changes I create to integrate Zgemma H5 in OpenWebif.
https://github.com/E...5e98137f4b2862a
For the grab problem, there is nothing to update for Zgemma H5 today but since the build process is broken, then it is probably normal that we cannot test the grab changes.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: Zgemma H5... OpenPLI still supporting ? #17
-
- Forum Moderator
PLi® Core member - 14,927 posts
+486
Excellent
Posted 19 June 2016 - 13:33
You can try to build the OpenWebif only without building a complete build.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: Zgemma H5... OpenPLI still supporting ? #18
-
- Senior Member
- 821 posts
+37
Good
Posted 19 June 2016 - 19:23
It's not working because of
cat /proc/stb/info/chipset
bcm7362
Only with cat /proc/cpuinfo you get the info bcm73625
Mut@nt HD51 STB 4K
Re: Zgemma H5... OpenPLI still supporting ? #19
-
- Member
- 10 posts
0
Neutral
Posted 25 June 2016 - 14:54
Tested and works?
Sorry for late reply... I'm away n just came back...
Tried install latest build (25-06-2016) and the screenshot problem still there... any idea ? thanks !
Re: Zgemma H5... OpenPLI still supporting ? #20
-
- PLi® Contributor
- 6,182 posts
+261
Excellent
Posted 26 June 2016 - 15:36
The answer is just one post above yours.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
