Posted 18 June 2016 - 18:25
Hi All
I have a ET10K unit running the latest VIX image but I've been looking at other images and came across your site.
Which is better for my box (loaded question I know 
VIX or OpenPLi?
How do I flash the image, is the same as VIX? Stick it on a USB stick? Your link to instructions speaks of pressing down button and powering on (think that's for other Xtrend models)
Thanks
Paul
Posted 18 June 2016 - 19:12
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 18 June 2016 - 19:22
Hi,
OpenPLi is a very functional image with the minimum needed to watch TV but all the extra plugins are available from there feed so quite easy to install if really needed.
Other images builders take the decision to pre-install many plugins (that you probably don't need) and for some images you cannot remove the useless plugins.
Other differences are the skins either you like X-Mas tree skins with many color or you prefer a more sober one, like the default OpenPLi one. By the way, OpenPLi is one of the skin that provides the more useful informations.
So newbies will enjoy plugin rich images because they will find many features and start playing with them, once you will be a more experienced user of "Enigma 2" based images you will probably come back to OpenPLi and install just the plugin that you really need from the feed.
And finally since OpenPLi is not overloaded with many pre-install plugins, it is a light, fast and stable image.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 June 2016 - 03:55
Posted 19 June 2016 - 10:49
Thanks to Pr2 and Abu for the replies. Its the main family box which also does streaming for the rest of the house. I'm looking for a rock solid image and the recent VIX updates seems to be getting flaky with my box, might just need factory reset but I'm thinking killing two birds with one stone.
Posted 19 June 2016 - 11:31
Even with OpenPLi when you perform an online update you can get problem afterwards (there is a disclaimer that warm you of this risk) mostly when drivers/kernel are updated, so it is sometimes needed to perform a full flash from USB. So when your box starts to have troubles, first thing to do is to try a brand new flash.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 19 June 2016 - 13:58
With OpenViX I would never do a software update, as the couch flashing of a new image is so easy providing you backup your settings, and you then have a clean image each time. .. and as mentioned there have been Xtrend driver changes recently.Thanks to Pr2 and Abu for the replies. Its the main family box which also does streaming for the rest of the house. I'm looking for a rock solid image and the recent VIX updates seems to be getting flaky with my box, might just need factory reset but I'm thinking killing two birds with one stone.
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 20 June 2016 - 08:23
Thanks for the updates. So OK, are you saying every time there is an update I should update via USB / new flash with restore of settings?
@TWOL Can you please expand on couch flash?
Posted 20 June 2016 - 09:19
Thanks for the updates. So OK, are you saying every time there is an update I should update via USB / new flash with restore of settings?
@TWOL Can you please expand on couch flash?
Sorry, I shouldn,t use "buzz" words.
In OpenViX if you press blue button, choose ViX and go to the ViX utilities (Backup Manager (actually Settings backup/restore), Image Manager (Image backup/restore)
Then choose Backup Manager and backup settings
Then Image Manager, yellow button download Image from ViX feeds. Then choose the Image you have just downloaded to the receiver and hit Blue button (Restore Image)
The receiver will then be clean flashed (using Betacentauri's flash tool) and will reboot. (Couch flash!)
On reboot go through usual wizard and restore the settings backup.
Sounds long winded, but is very fast, no need for a usb, and you always have a clean image.
The default for Image Manager is to automatically take a settings backup but I like to control things!
The only time I have used a usb in the last 2 years is to flash new bootloaders.
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 20 June 2016 - 09:39
Hi,
OpenPLi also have a backup/restore process and no you don't need to flash by USB each time there is something new.
You can perform the online update but if you think that your box no longer behaves normally then try an USB flash.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 20 June 2016 - 10:23
You are referring to Pedro's 'Backup Suite'. That indeed has the option to restore/flash an image(backup), but not the option to download an image from the PLi-server.
So one has to manually download it, transfer it to a staorage medium attached to the STB and then use the suite to flash.
Posted 20 June 2016 - 12:44
The beauty of this method of image flashing is that you don't get usb format issues or finger trouble, and the only delays in the process are really waiting for my brain, E2 to stop (initiated by flashing tool), the time it takes to flash using the flash tool and then reboot time.... which are receiver specific.
Even on my ET8500's it takes less than 3 minutes .... with the biggest delay my brain think time while I decide where I am flashing (OS1 or OS2) ... would hate to lose last working image!
Gigablue Quad 4K & UE 4K, Vu+Uno4KSE, DM900
.........FBC Tuners:
------------------> GT-SAT unicable lnb to 1.5M dish(28.2E)
------------------> Gigablue unicable lnb to 80 cm dish(19.2E)
Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
Posted 21 June 2016 - 05:30
Posted 21 June 2016 - 06:46
Latest ET10000 update is from a while back; PLi & ViX are using the same.
0 members, 1 guests, 0 anonymous users
