48 replies to this topic

[teo1966]

heb hier een fusion hd se als ik een opname afspeel heb ik haperingen

heb twee verschillende harde schijven geprobeerd

heb oscam en cccam 2.3.0 ( met prio ) geprobeerd

heb een openpli met de oude driver en de nieuwe driver geprobeerd

allemaal hetzelfde resultaat haperingen met opnames afspelen

iemand een idee of wat tips ?

[WanWizard]

Als je een paar keer afspeelt, zitten dan de haperingen op exact dezelfde plek? En als je op de PC afspeelt?

 

Met andere woorden: zitten de haperingen in de opname, of gebeurd het tijdens het afspelen?

[teo1966]

Als je een paar keer afspeelt, zitten dan de haperingen op exact dezelfde plek? En als je op de PC afspeelt?
 
Met andere woorden: zitten de haperingen in de opname, of gebeurd het tijdens het afspelen?

nee is willekeurig de haperingen
de opname op een pc gezet geen haperingen
de opname vanuit de box op een pc gekeken willekeurige haperingen

[WanWizard]

Ok, het gaat dus puur over problemen bij het afspelen, en niet over opnemen. Dus de softcam is niet relevant.

 

Staat de box op dat moment andere dingen te doen (spinner in beeld?)? Als je een opname op een USB stick zet en die in de box steekt, heb je dan het probleem nog?

[teo1966]

de box staat niks anders te doen vanaf usbstick ook haperingen wel minder



[H[JMem: 302676K used, 11948K free, 0K shrd, 3K buff, 4K cached
CPU: 1% usr 11% sys 3% nic 80% idle 0% io 0% irq 3% sirq
Load average: 0.77 0.94 0.90 2/88 7041
[7m PID PPID USER STAT VSZ %VSZ %CPU COMMAND[0m
1000 995 root S 135m 44% 16% /usr/bin/enigma2
727 2 root SW 0 0% 1% [nx_sched_high_s]
6779 6767 root R 3188 1% 0% top
639 2 root SW 0 0% 0% [usb-storage]
990 989 root S 13344 4% 0% /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
903 1 root S 6920 2% 0% smbd -D
913 903 root S 6920 2% 0% smbd -D
989 1 root S 5756 2% 0% /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
900 1 root S 3964 1% 0% nmbd -D
984 1 avahi S 3608 1% 0% avahi-daemon: running [fusionhdse.local]
985 984 avahi S 3608 1% 0% avahi-daemon: chroot helper
970 1 root S 3240 1% 0% /usr/sbin/inetd
6766 970 root S 3192 1% 0% telnetd
6767 6766 root S 3188 1% 0% -sh
944 1 messageb S 2980 1% 0% /usr/bin/dbus-daemon --system
974 1 root S 2868 1% 0% /sbin/syslogd -n -O /var/log/messages
977 1 root S 2868 1% 0% /sbin/klogd -n
995 1 root S 2868 1% 0% {enigma2.sh} /bin/sh /usr/bin/enigma2.sh
928 1 root S 2868 1% 0% udhcpc -b -H fusionhdse -p /var/run/udhcpc.eth0.pid -i eth0
957 1 root S 2700 1% 0% /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22
961 1 rpc S 2688 1% 0% /usr/sbin/rpcbind
6258 6256 root S 2684 1% 0% vsftpd
6256 970 nobody S 2660 1% 0% vsftpd
966 1 rpcuser S 2280 1% 0% /usr/sbin/rpc.statd
1 0 root S 1940 1% 0% init [3]
6 2 root SW 0 0% 0% [kworker/u4:0]
11 2 root SW 0 0% 0% [ksoftirqd/1]
389 2 root SW 0 0% 0% [kswapd0]
3 2 root SW 0 0% 0% [ksoftirqd/0]
726 2 root SW 0 0% 0% [nx_sched]
730 2 root SW 0 0% 0% [nx_sched_low]
689 2 root SW< 0 0% 0% [kworker/0:1H]
702 2 root SW< 0 0% 0% [kworker/1:1H]
380 2 root SW 0 0% 0% [kworker/0:1]
1051 2 root SW 0 0% 0% [kworker/1:2]
7 2 root RW 0 0% 0% [rcu_sched]
733 2 root SW 0 0% 0% [KeyRead-uart]
16 2 root SW 0 0% 0% [kworker/u4:1]
1245 2 root SW 0 0% 0% [jbd2/sda1-8]
10 2 root SW 0 0% 0% [migration/1]
654 2 root SW 0 0% 0% [ubi_bgt0d]
2 0 root SW 0 0% 0% [kthreadd]
5 2 root SW< 0 0% 0% [kworker/0:0H]
8 2 root SW 0 0% 0% [rcu_bh]
9 2 root SW 0 0% 0% [migration/0]
12 2 root SW 0 0% 0% [kworker/1:0]

[WanWizard]

Stop enigma eens met

init 4

en start deze daarna met

enigma2.sh

Dan krijg je alle debug logging van enigma te zien. Speel nu eens een opname af, en kijk in de console output mee. Zie je dan foutmeldingen of andere rare dingen voorbij komen?

 

Je kunt dit afbreken met ctrl-C, en daarna via

init 3

de box weer in oude staat herstellen.

[teo1966]

hier alvast een voorlopige log

root@fusionhdse:~# [6nenigma2.sh
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
< 287.509> [HardwareInfo] Scanning hardware info
< 287.512> Detected: fusionhdse (1200E6)
< 287.526> [Harddisk] enumerating block devices...
< 287.541> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 287.542> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
< 288.215> [NimManager] Reading satellites.xml
< 288.799> [NIM] removing internal link on frontend id 1
< 288.800> [SecConfigure] sec config cleared
< 288.803> [SecConfigure] slot: 0 configmode: simple
< 288.804> [SecConfigure] diseqcmode: diseqc_a_b
< 288.806> [SecConfigure] slot: 1 configmode: simple
< 288.807> [SecConfigure] diseqcmode: diseqc_a_b
< 288.809> [SecConfigure] sec config completed
< 289.693> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 291.271> [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
< 291.292> [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
< 291.445> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 291.507> Activating keymap: Default (US)
< 291.508> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 291.513> Activating language Nederlands
< 292.047> --> setting scaler_sharpness to: 0000000D
< 292.358> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 292.380> [ePopen] command: ip -o addr show dev eth0
< 292.809> Plugin Extensions/HbbTV failed to load: No module named HbbTV.plugin
< 292.811> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/HbbTV
< 295.773> getFPVersion failed!
< 295.806> Plugin Extensions/WebInterface failed to load: No module named plugin
< 295.807> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 295.901> [AudioSync] fallback to default translation for Audio Sync Setup
< 295.906> [AudioSync] fallback to default translation for Setup for the Audio Sync Plugin
< 295.911> [AudioSync] fallback to default translation for Audio Sync
< 295.915> [AudioSync] fallback to default translation for sets the Audio Delay (LipSync)
< 295.940> [MovieCut] set language to nl
< 295.946> [MovieCut] set language to nl
< 295.952> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 296.781> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 296.827> [VideoHardware] getModeList for port DVI-PC
< 296.829> [VideoHardware] getModeList for port Scart
< 296.830> [VideoHardware] getModeList for port YPbPr
< 296.833> [VideoHardware] getModeList for port Scart
< 296.836> [VideoHardware] getModeList for port DVI-PC
< 296.837> [VideoHardware] getModeList for port DVI
< 296.842> [VideoHardware] hotplug on dvi
< 296.845> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 296.859> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 296.863> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 296.868> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 296.872> [VideoHardware] setMode - port: DVI mode: 1080p rate: multi
< 296.878> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 297.040> [SKIN] No skin to read...
< 297.094> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 297.891> [SKIN] No skin to read...
< 298.040> RemovePopup, id = ZapError
< 298.318> setValue 80
< 298.443> playing 1:0:1:FB0:451:35:C00000:0:0:0:
< 298.446> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 298.485> not pauseable.
< 298.488> not pauseable.
< 298.491> not pauseable.
< 298.493> new service started! trying to download cuts!
< 298.493> download failed, no cuesheet interface
< 298.494> RemovePopup, id = ZapError
< 298.590> [ePopen] command: route -n | grep eth0
< 298.631> 0.0.0.0
< 298.631> 192.168
< 298.649> nameservers: [[192, 168, 1, 1]]
< 298.650> read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
< 298.651> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 179], 'up': True, 'mac': '0c:c6:ac:02:5a:21', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
< 298.658> AT plugin not found
< 298.659> SerienRecorder plugin not found
< 298.661> ER plugin not found
< 298.667> [OpenWebif] no plugins to load
< 298.681> [OpenWebif] started on 80
TuxTxt cache cleared
< 301.797> [eDVBPESReader] Created. Opening demux
< 301.798> [eDVBPESReader] Created. Opening demux
< 301.801> not pauseable.
< 301.804> not pauseable.
< 301.832> RemovePopup, id = ZapError
< 302.333> [Dish] tuning failed
< 326.856> action -> InfobarActions showMovies
< 332.259> action -> MovieSelectionActions contextMenu
< 335.842> action -> OkCancelActions ok
< 337.974> action -> OkCancelActions ok
< 338.039> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 338.048> not pauseable.
< 338.060> RemovePopup, id = ZapError
< 338.072> playing 1:0:0:0:0:0:0:0:0:0:/media/hdd/20160624 1001 - NPO 1 HD - NOS Journaal.ts
cleaning up
TuxTxt cache cleared
< 338.126> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 28
TuxTxt running thread...(028)
< 338.545> [eDVBPESReader] Created. Opening demux
< 338.553> [eDVBPESReader] Created. Opening demux
TuxTxt: readerror
TuxTxt: readerror
< 338.726> RemovePopup, id = ZapError
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 338.909> resolved to PLAY
< 338.913> new service started! trying to download cuts!
< 338.918> RemovePopup, id = ZapError
TuxTxt: readerror
< 339.141> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
< 339.703> [Dish] tuning failed
< 339.730> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
< 403.414> action: seekdef:3
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 414.022> action: seekdef:3
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 1070.197> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 1617.432> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 1966.937> action: okButton
< 1966.938> action -> InfobarSeekActions okButton
< 1966.939> action -> InfobarShowHideActions toggleShow
< 1980.354> action: seekdef:9
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 2757.969> action: okButton
< 2757.970> action -> InfobarSeekActions okButton
< 2757.970> action -> InfobarShowHideActions toggleShow
< 2760.729> action: seekdef:9
< 2769.500> action: seekdef:9
TuxTxt: readerror
TuxTxt: readerror
< 2770.490> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
< 2781.605> action: okButton
< 2781.607> action -> InfobarSeekActions okButton
< 2781.608> action -> InfobarShowHideActions toggleShow
< 2794.097> action: seekdef:6
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror

[WanWizard]

Dat zal een expert moeten beoordelen vrees ik.

[teo1966]

het einde van de opname kijken

TuxTxt: readerror
TuxTxt: readerror
< 10732.163> [ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
< 16956.858> action -> MoviePlayerActions leavePlayer
< 16959.610> service end!
< 16959.611> resolved to PLAY
TuxTxt stopped service 28
cleaning up
TuxTxt cache cleared
< 16969.530> action -> MovieSelectionActions contextMenu
< 16972.066> action -> OkCancelActions ok
< 16976.528> action -> OkCancelActions ok
< 16976.569> playing 1:0:0:0:0:0:0:0:0:0:/media/hdd/20160624 1001 - NPO 1 HD - NOS Journaal.ts
< 16976.573> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 28
TuxTxt running thread...(028)
< 16977.002> [eDVBPESReader] Created. Opening demux
< 16977.005> [eDVBPESReader] Created. Opening demux
TuxTxt: readerror
TuxTxt: readerror
< 16977.293> RemovePopup, id = ZapError
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror
< 16977.584> resolved to PLAY
< 16977.588> new service started! trying to download cuts!
< 16977.589> RemovePopup, id = ZapError
< 16977.615> [eDVBPESReader] ERROR reading PES (fd=34): Value too large for defined data type
< 16977.961> [Dish] tuning failed
< 16979.908> action -> GlobalActions volumeDown
< 16979.916> setValue 75
< 16980.422> action -> GlobalActions volumeDown
< 16980.429> setValue 70
< 16980.751> action -> GlobalActions volumeDown
< 16980.758> setValue 65
< 16981.854> action -> GlobalActions volumeDown
< 16981.865> setValue 60
< 16982.231> action -> GlobalActions volumeDown
< 16982.239> setValue 55
< 16982.644> action -> GlobalActions volumeDown
< 16982.655> setValue 50
< 16982.953> action -> GlobalActions volumeDown
< 16982.960> setValue 45
< 16983.162> action -> GlobalActions volumeDown
< 16983.168> setValue 40
< 16983.771> action -> GlobalActions volumeUp
< 16983.777> setValue 45
< 16985.139> action -> GlobalActions volumeUp
< 16985.146> setValue 50
TuxTxt: readerror
TuxTxt: readerror
TuxTxt: readerror

[Dimmie]

Zojuist met een Xsarius Se met dubbele kaleltuner getest (intern) > kan dit probleem niet reproduceren. Geen haperingen, loopt gewoon vloeiend, zelfs bij 2 opnames tegelijk.

[teo1966]

kun je de fusion hdse met 2 kabel tuners krijgen ?
in welke setup heb je getest ( driver versie ,welke openpli ,welke harde schijf )

[teo1966]

Dat zal een expert moeten beoordelen vrees ik.

nog een expert gesproken ?

[teo1966]

heb op de ontvanger met openpli 2016-06-22 de teletext caching inschakelen op NEE gezet
de foutmelding TuxTxt: readerror is nu weg uit de log alleen bij het stoppen van de opname komt hij 1 keer terug
zal de ontvanger eens updaten naar 2016-06-25 eens kijken wat dat brengt

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.06.25 12:06:14 =~=~=~=~=~=~=~=~=~=~=~=


openpli 4 fusionhdse




fusionhdse login: root
root@fusionhdse:~# [6ninit 4
root@fusionhdse:~# [6n
root@fusionhdse:~# init 4[J
root@fusionhdse:~# enigma2.sh[J
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
< 81.954> [HardwareInfo] Scanning hardware info
< 81.957> Detected: fusionhdse (1200E6)
< 81.971> [Harddisk] enumerating block devices...
< 81.984> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 81.985> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
< 82.647> [NimManager] Reading satellites.xml
< 83.211> [NIM] removing internal link on frontend id 1
< 83.213> [SecConfigure] sec config cleared
< 83.216> [SecConfigure] slot: 0 configmode: simple
< 83.216> [SecConfigure] diseqcmode: diseqc_a_b
< 83.219> [SecConfigure] slot: 1 configmode: simple
< 83.220> [SecConfigure] diseqcmode: diseqc_a_b
< 83.222> [SecConfigure] sec config completed
< 84.070> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 85.576> [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
< 85.594> [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
< 85.728> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 85.789> Activating keymap: Default (US)
< 85.790> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 85.796> Activating language Nederlands
< 86.320> --> setting scaler_sharpness to: 0000000D
< 86.656> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 86.678> [ePopen] command: ip -o addr show dev eth0
< 87.053> Plugin Extensions/HbbTV failed to load: No module named HbbTV.plugin
< 87.055> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/HbbTV
< 90.006> getFPVersion failed!
< 90.038> Plugin Extensions/WebInterface failed to load: No module named plugin
< 90.040> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 90.134> [AudioSync] fallback to default translation for Audio Sync Setup
< 90.140> [AudioSync] fallback to default translation for Setup for the Audio Sync Plugin
< 90.144> [AudioSync] fallback to default translation for Audio Sync
< 90.149> [AudioSync] fallback to default translation for sets the Audio Delay (LipSync)
< 90.184> [MovieCut] set language to nl
< 90.188> [MovieCut] set language to nl
< 90.196> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 91.062> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 91.110> [VideoHardware] getModeList for port DVI-PC
< 91.112> [VideoHardware] getModeList for port Scart
< 91.114> [VideoHardware] getModeList for port YPbPr
< 91.118> [VideoHardware] getModeList for port Scart
< 91.120> [VideoHardware] getModeList for port DVI-PC
< 91.122> [VideoHardware] getModeList for port DVI
< 91.128> [VideoHardware] hotplug on dvi
< 91.130> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 91.152> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 91.157> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 91.161> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 91.165> [VideoHardware] setMode - port: DVI mode: 1080p rate: multi
< 91.170> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 91.329> [SKIN] No skin to read...
< 91.383> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 92.220> [SKIN] No skin to read...
< 92.360> RemovePopup, id = ZapError
< 92.628> setValue 50
< 92.725> playing 1:0:1:FB0:451:35:C00000:0:0:0:
< 92.727> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 92.769> not pauseable.
< 92.774> not pauseable.
< 92.777> not pauseable.
< 92.780> new service started! trying to download cuts!
< 92.781> download failed, no cuesheet interface
< 92.781> RemovePopup, id = ZapError
< 92.875> [ePopen] command: route -n | grep eth0
< 92.920> 0.0.0.0
< 92.920> 192.168
< 92.939> nameservers: [[192, 168, 1, 1]]
< 92.940> read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
< 92.940> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 179], 'up': True, 'mac': '0c:c6:ac:02:5a:21', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
< 92.947> AT plugin not found
< 92.948> SerienRecorder plugin not found
< 92.949> ER plugin not found
< 92.954> [OpenWebif] no plugins to load
< 92.968> [OpenWebif] started on 80
TuxTxt cache cleared
< 95.994> [eDVBPESReader] Created. Opening demux
< 95.994> [eDVBPESReader] Created. Opening demux
< 95.997> not pauseable.
< 96.000> not pauseable.
< 96.028> RemovePopup, id = ZapError
< 96.528> [Dish] tuning failed
< 103.278> action -> InfobarChannelSelection keyUp
< 104.063> action -> ChannelSelectBaseActions keyLeft
< 104.615> action -> OkCancelActions ok
< 104.617> playing 1:0:1:5225:C99:3:EB0000:0:0:0:
cleaning up
TuxTxt cache cleared
< 104.669> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 104.703> not pauseable.
< 104.706> not pauseable.
< 104.709> not pauseable.
< 104.712> new service started! trying to download cuts!
< 104.712> download failed, no cuesheet interface
< 104.713> RemovePopup, id = ZapError
TuxTxt cache cleared
< 105.287> [eDVBPESReader] Created. Opening demux
< 105.288> [eDVBPESReader] Created. Opening demux
< 105.291> not pauseable.
< 105.294> not pauseable.
< 105.398> RemovePopup, id = ZapError
< 105.898> [Dish] tuning failed
< 119.145> action -> InfobarActions showMovies
< 121.661> action -> OkCancelActions ok
< 121.730> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 121.742> not pauseable.
< 121.755> RemovePopup, id = ZapError
< 121.766> playing 1:0:0:0:0:0:0:0:0:0:/media/hdd/20160625 0834 - NPO 1 HD - NOS Studio France.ts
cleaning up
TuxTxt cache cleared
< 121.828> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
TuxTxt cache cleared
< 121.946> [eDVBPESReader] Created. Opening demux
< 121.948> [eDVBPESReader] Created. Opening demux
< 121.997> RemovePopup, id = ZapError
< 122.070> resolved to PLAY
< 122.072> new service started! trying to download cuts!
< 122.310> seekable.getLength() returns: [0, 500792309L]
< 122.312> RemovePopup, id = ZapError
< 122.833> warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Afspelen wordt hervat)
< 122.901> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
< 122.967> [Dish] tuning failed
< 123.873> Timeout!
< 124.134> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
< 124.179> [eDVBPESReader] ERROR reading PES (fd=35): Value too large for defined data type
< 137.821> action -> GlobalActions volumeUp
< 137.827> setValue 55
< 138.151> action -> GlobalActions volumeUp
< 138.157> setValue 60
< 138.409> action -> GlobalActions volumeUp
< 138.416> setValue 65
< 138.657> action -> GlobalActions volumeUp
< 138.664> setValue 70
< 216.598> action -> MoviePlayerActions leavePlayer
< 217.235> service end!
< 217.236> resolved to PLAY
cleaning up
TuxTxt cache cleared
< 264.266> action -> OkCancelActions cancel
< 264.327> playing 1:0:1:5225:C99:3:EB0000:0:0:0:
< 264.331> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 264.370> not pauseable.
< 264.373> not pauseable.
< 264.376> not pauseable.
< 264.378> new service started! trying to download cuts!
< 264.379> download failed, no cuesheet interface
< 264.379> RemovePopup, id = ZapError
TuxTxt cache cleared
< 265.997> [eDVBPESReader] Created. Opening demux
< 265.998> [eDVBPESReader] Created. Opening demux
< 266.001> not pauseable.
< 266.004> not pauseable.
< 266.117> RemovePopup, id = ZapError
< 266.617> [Dish] tuning failed

Edited by teo1966, 25 June 2016 - 11:14.

[WanWizard]

 

Dat zal een expert moeten beoordelen vrees ik.

nog een expert gesproken ?

 

 

Nee, ik zit tot over mijn oren in een flinke server verhuizing.

[teo1966]

heb nu op de ontvanger met openpli 2016-06-23 de teletext caching inschakelen op NEE gezet

dit is de log heb nog geen haperingen gezien zal eens kijken wat een update naar 2016-06-29 brengt

<160306.148> resolved to PLAY
cleaning up
TuxTxt cache cleared
<160312.802> action -> OkCancelActions ok
<160312.842> playing 1:0:0:0:0:0:0:0:0:0:/media/hdd/20160628 2249 - NPO 1 HD - Paul van Vliet_ One man show 2015.ts
<160312.846> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
TuxTxt cache cleared
<160312.912> [eDVBPESReader] Created. Opening demux
<160312.913> [eDVBPESReader] Created. Opening demux
<160312.982> RemovePopup, id = ZapError
<160313.191> resolved to PLAY
<160313.196> new service started! trying to download cuts!
<160313.198> seekable.getLength() returns: [0, 248044923L]
<160313.257> warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Afspelen wordt hervat)
<160313.294> RemovePopup, id = ZapError
<160313.324> [eDVBPESReader] ERROR reading PES (fd=33): Value too large for defined data type
<160313.578> [Dish] tuning failed
<160314.291> Timeout!
<160314.507> [eDVBPESReader] ERROR reading PES (fd=33): Value too large for defined data type
<160315.551> action -> MoviePlayerActions leavePlayer
<160316.086> service end!
<160316.087> resolved to PLAY
cleaning up
TuxTxt cache cleared
<160319.485> action -> OkCancelActions cancel
<160319.548> playing 1:0:1:5225:C99:3:EB0000:0:0:0:
<160319.551> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
<160319.589> not pauseable.
<160319.591> not pauseable.
<160319.595> not pauseable.
<160319.597> new service started! trying to download cuts!
<160319.597> download failed, no cuesheet interface
<160319.598> RemovePopup, id = ZapError
TuxTxt cache cleared
<160320.719> [eDVBPESReader] Created. Opening demux
<160320.720> [eDVBPESReader] Created. Opening demux
<160320.723> not pauseable.
<160320.726> not pauseable.
<160320.839> RemovePopup, id = ZapError
<160321.339> [Dish] tuning failed

[Erik Slagter]

Er loopt hierover al een topic, misschien handig om er even bij te pakken.

[teo1966]

welk topic ?

Er loopt hierover al een topic, misschien handig om er even bij te pakken.

welk topic ?

[teo1966]

zijn er nog ontwikkelingen ?

[teo1966]

de fusionhdse geupdate naar de laatste openpli gemount op een nas en een opname afgepeeld 1 hapering gezien niks op de log te zien

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.07.11 16:55:04 =~=~=~=~=~=~=~=~=~=~=~=


openpli 4 fusionhdse




fusionhdse login: root
root@fusionhdse:~# [6n
root@fusionhdse:~# [Jini 4[J[Jt 4
root@fusionhdse:~# [6nenigma2.sh
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA2_DEBUG settings: Level=3
[MAIN] executing main
< 5646.782> [HardwareInfo] Scanning hardware info
< 5646.787> Detected: fusionhdse (1200E6)
< 5646.804> [Harddisk] enumerating block devices...
< 5646.817> [Harddisk] new device sda -> /dev/sda -> /dev/sda
< 5646.818> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
< 5647.565> [NimManager] Reading satellites.xml
< 5648.131> [NIM] removing internal link on frontend id 1
< 5648.133> [SecConfigure] sec config cleared
< 5648.135> [SecConfigure] slot: 0 configmode: simple
< 5648.136> [SecConfigure] diseqcmode: diseqc_a_b
< 5648.138> [SecConfigure] slot: 1 configmode: simple
< 5648.139> [SecConfigure] diseqcmode: diseqc_a_b
< 5648.141> [SecConfigure] sec config completed
< 5649.098> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 5650.740> [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_templates.xml
< 5650.762> [SKIN] loading include: /usr/share/enigma2/PLi-HD/skin_plugins.xml
< 5650.920> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 5651.003> Activating keymap: Default (US)
< 5651.004> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 5651.010> Activating language Nederlands
< 5651.555> --> setting scaler_sharpness to: 0000000D
< 5651.896> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 5651.920> [ePopen] command: ip -o addr show dev eth0
< 5652.363> Plugin Extensions/HbbTV failed to load: No module named HbbTV.plugin
< 5652.364> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/HbbTV
< 5655.520> getFPVersion failed!
< 5655.558> Plugin Extensions/WebInterface failed to load: No module named plugin
< 5655.559> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 5655.667> [AudioSync] fallback to default translation for Audio Sync Setup
< 5655.673> [AudioSync] fallback to default translation for Setup for the Audio Sync Plugin
< 5655.678> [AudioSync] fallback to default translation for Audio Sync
< 5655.682> [AudioSync] fallback to default translation for sets the Audio Delay (LipSync)
< 5655.720> [MovieCut] set language to nl
< 5655.725> [MovieCut] set language to nl
< 5655.733> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 5656.583> [AutoMount.py] CheckMountPointFinished None None
< 5656.629> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 5656.675> [VideoHardware] getModeList for port DVI-PC
< 5656.676> [VideoHardware] getModeList for port Scart
< 5656.678> [VideoHardware] getModeList for port YPbPr
< 5656.681> [VideoHardware] getModeList for port Scart
< 5656.685> [VideoHardware] getModeList for port DVI-PC
< 5656.687> [VideoHardware] getModeList for port DVI
< 5656.692> [VideoHardware] hotplug on dvi
< 5656.694> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 5656.707> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 5656.711> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 5656.715> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 5656.720> [VideoHardware] setMode - port: DVI mode: 1080p rate: multi
< 5656.727> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 5656.881> [SKIN] No skin to read...
< 5656.937> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 5657.754> [SKIN] No skin to read...
< 5657.893> RemovePopup, id = ZapError
< 5658.177> setValue 95
< 5658.276> playing 1:0:1:FB0:451:35:C00000:0:0:0:
< 5658.279> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
< 5658.320> not pauseable.
< 5658.323> not pauseable.
< 5658.326> not pauseable.
< 5658.328> new service started! trying to download cuts!
< 5658.329> download failed, no cuesheet interface
< 5658.329> RemovePopup, id = ZapError
< 5658.427> [ePopen] command: route -n | grep eth0
< 5658.469> 0.0.0.0
< 5658.469> 192.168
< 5658.492> nameservers: [[192, 168, 1, 1]]
< 5658.493> read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}}
< 5658.494> self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 181], 'up': True, 'mac': '0c:c6:ac:02:5a:21', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
< 5658.500> AT plugin not found
< 5658.500> SerienRecorder plugin not found
< 5658.501> ER plugin not found
< 5658.506> [OpenWebif] no plugins to load
< 5658.520> [OpenWebif] started on 80
TuxTxt cache cleared
< 5661.130> [eDVBPESReader] Created. Opening demux
< 5661.131> [eDVBPESReader] Created. Opening demux
< 5661.134> not pauseable.
< 5661.137> not pauseable.
< 5661.165> RemovePopup, id = ZapError
< 5661.665> [Dish] tuning failed
< 5669.399> action -> InfobarActions showMovies
< 5674.871> action -> OkCancelActions ok
< 5674.937> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 5674.948> not pauseable.
< 5674.959> RemovePopup, id = ZapError
< 5674.971> playing 1:0:0:0:0:0:0:0:0:0:/media/net/DS1512/movie/20160710 2227 - Ziggo Sport Select HD - Formule 1_ GP van Groot-Brittannië, Race.ts
cleaning up
TuxTxt cache cleared
< 5675.027> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
TuxTxt cache cleared
< 5675.103> [eDVBPESReader] Created. Opening demux
< 5675.107> [eDVBPESReader] Created. Opening demux
< 5675.172> RemovePopup, id = ZapError
< 5675.810> resolved to PLAY
< 5675.812> new service started! trying to download cuts!
< 5675.814> seekable.getLength() returns: [0, 258946667L]
< 5675.816> RemovePopup, id = ZapError
< 5676.041> warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Afspelen wordt hervat)
< 5676.305> [Dish] tuning failed
< 5677.073> Timeout!
< 6011.689> [ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
< 6597.917> action: okButton
< 6597.917> action -> InfobarSeekActions okButton
< 6597.918> action -> InfobarShowHideActions toggleShow
< 7033.238> action: seekdef:3
< 7034.868> action: seekdef:6
< 7036.966> action: seekdef:6
< 7038.547> action: seekdef:6
< 7040.554> action: seekdef:6
< 7041.963> action: seekdef:6
< 7043.302> action: seekdef:6
< 7045.581> action: seekdef:6
< 7052.575> action -> MoviePlayerActions leavePlayer
< 7053.493> service end!
< 7053.493> resolved to PLAY
cleaning up
TuxTxt cache cleared

[teo1966]

heb de optie teletext caching inschakelen op NEE staan
zie in de log TuxTxt cache cleared voorbij komen
en ik zie getResolvedKey config.usage.remote_fallback failed !! (Typo??)
wat is hiervan de reden ?

TuxTxt cache cleared
< 5675.027> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
TuxTxt cache cleared