using open pli 4 on DM 500HD when i go to menu/set up/ softcam and press ok , there is no information on which softcam i have installed . just a blank screen . how do i tell which softcam is running ? thanks
softcam information ?
Started by patch, 24 Jun 2016 18:06
7 replies to this topic
Re: softcam information ? #2
-
- Senior Member
- 1,030 posts
+14
Neutral
Posted 24 June 2016 - 18:19
Did you install any softcam? OpenPli comes without any softcam preinstalled.... Goto MENU-APPLICATIONS. Press green and browse to Softcam option and install softcam of your choosing...
Re: softcam information ? #3
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 24 June 2016 - 20:55
Default long blue should give by default the same screen
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: softcam information ? #4
-
- Senior Member
- 103 posts
0
Neutral
Posted 25 June 2016 - 09:04
i cant download any softcams from the menu , i get message saying i need to run "opkg update" . how do i do this ? thanks
Re: softcam information ? #5
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 25 June 2016 - 10:12
By upgrading your firmware of your box...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: softcam information ? #6
-
- Senior Member
- 103 posts
0
Neutral
Posted 25 June 2016 - 10:31
i have updated the software via the remote and re booted but still get same message .i am trying to re-flash DM 500 hd , i know how to do it but when i press and hold switch on the front and flick switch on the back , i dont get an ip address appearing on the tv , how ever long i hold the switch . then i just get the green light keep flashing numerous times and nothing happens until i press the switch on the front again and box comes on as normal but still has the same image on . can someone help with this ? thanks.
Re: softcam information ? #7
-
- Forum Moderator
PLi® Core member - 27,487 posts
+397
Excellent
Posted 25 June 2016 - 11:48
I often experienced this that no ipaddress is given on the screen. So you have to check whether the box still has the original ipaddress or use a tool which scans your network for present hardware. There you'll find the 500HD. I often use the Fing app on my iPhone to do this.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: softcam information ? #8
-
- Senior Member
- 1,030 posts
+14
Neutral
Posted 25 June 2016 - 12:44
If you get no IP displayed make sure the LAN cable is connected properly to your router.. It may be handy to show which version of the DM500HD you own... The V1 which is supported by OpenPli and has bootloader #84, the V2 is NOT supported by OpenPli and has bootloader #88 or #89.. This info is shown on the TV screen.
If the cable is OK and the IP address is not shown, simply use DCC-E2 and use the search function to obtain the used IP address.
Flashing is not an automated option! Once you put the DM500HD in *stop* mode (that's what is called) you need to start the flashing procedure yourself with a browser. You do so by entering the found IP in the browser's web address. For instance: http://192.168.178.29 and press <enter>.
If the cable is OK and the IP address is not shown, simply use DCC-E2 and use the search function to obtain the used IP address.
Flashing is not an automated option! Once you put the DM500HD in *stop* mode (that's what is called) you need to start the flashing procedure yourself with a browser. You do so by entering the found IP in the browser's web address. For instance: http://192.168.178.29 and press <enter>.
Edited by goldeneye, 25 June 2016 - 12:48.
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
