hello , I have zero vu planted on the image of OpenPLi customized . It ' happened after a reboot and now arrived on that image does not go ahead .
For the case hits the files that I wrote in the subject ? what is it since I deleted following the instructions of another hole.
I state that I have USB ports that do not go so I can not reflasharlo . I do not know how to solve.
That file can be found somewhere if that's what the problem ?
/usr/bin/enigma2_pre_start.sh
Started by babeuf, 24 Jul 2016 14:16
11 replies to this topic
#1
-
- Member
- 4 posts
0
Neutral
Posted 24 July 2016 - 14:16
Re: /usr/bin/enigma2_pre_start.sh #2
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 24 July 2016 - 17:12
Google translate didn't quite succeed at translating. You might want to try your native tongue?
Real musicians never die - they just decompose
Re: /usr/bin/enigma2_pre_start.sh #3
-
- PLi® Contributor
- 6,181 posts
+261
Excellent
Posted 24 July 2016 - 19:41
Looks a like a french guys trying to write in english.
Anyway if you edit the
/usr/bin/enigma2_pre_start.sh
and that the image no longer starts then clearly your changes are wrong. Moreover there is no, by default, any enigma2_pre_start.sh script in OpenPLi.
If your goal is to start a softcam this is not the proper way to do it in an OpenPLi image. Install the softcam from the feed and select it has default.
Then if you want to change the startup parameter edit the:
/etc/init.d/softcam
script.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: /usr/bin/enigma2_pre_start.sh #4
-
- Senior Member
- 51 posts
0
Neutral
Posted 24 July 2016 - 21:21
The enigma2_pre_start.sh is used for other purpose.
Zgemma H7S Openpli 6.0 R.C.
Zgemma H2.H OpenPli 6.0 R.C.
Zgemma H2 OpenPli 4
Re: /usr/bin/enigma2_pre_start.sh #5
-
- Member
- 4 posts
0
Neutral
Posted 25 July 2016 - 17:18
Ho il vu zero piantato sull'immagine personalizzata di openpli. E' capitato dopo un riavvio e adesso arrivato su quell'immagine non va più avanti.
Per caso centra il file che ho scritto in oggetto? a cosa serve visto che l'ho cancellato seguendo le istruzioni di un altro forum.
Premetto che ho le porte usb che non vanno quindi non posso reflasharlo. Non so come risolvere.
Quel file si può reperire da qualche parte se è quello il problema?
Re: /usr/bin/enigma2_pre_start.sh #6
-
- Forum Moderator
PLi® Core member - 27,494 posts
+397
Excellent
Posted 26 July 2016 - 10:01
It seems Babeuf is Italian, but our board is only suitable for three languages. English, German and of course Dutch.
So please try to translate your question in a proper way.
As I understand him right, he placed a customized Openpli image on his VU+ Zero and askes support concerning something. I'm afraid that he won't find any help as it is hard to give support on a customized image.
So please try to translate your question in a proper way.
As I understand him right, he placed a customized Openpli image on his VU+ Zero and askes support concerning something. I'm afraid that he won't find any help as it is hard to give support on a customized image.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: /usr/bin/enigma2_pre_start.sh #7
-
- Member
- 4 posts
0
Neutral
Posted 26 July 2016 - 16:51
It is not a custom image is a pure OpenPLi . I deleted that file and image hangs on boot . If anyone can send me this file via ftp perhaps you reset the decoder .
Re: /usr/bin/enigma2_pre_start.sh #8
-
- Forum Moderator
PLi® Core member - 27,494 posts
+397
Excellent
Posted 26 July 2016 - 17:12
Why don't you flash your Zero again. Or are you afraid you are going to loose some data like the C:line?
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: /usr/bin/enigma2_pre_start.sh #9
-
- PLi® Core member
- 70,528 posts
+1,811
Excellent
Posted 26 July 2016 - 17:12
In a standard OpenPLi image, the file enigma2_pre_start.sh does not exist.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: /usr/bin/enigma2_pre_start.sh #10
-
- Member
- 4 posts
0
Neutral
Posted 26 July 2016 - 18:19
the problem that do not work more USB ports
Re: /usr/bin/enigma2_pre_start.sh #11
-
- PLi® Core member
- 70,528 posts
+1,811
Excellent
Posted 26 July 2016 - 21:36
If it still boots, login with telnet as soon as the box boots, and give the command "init 4" to force Enigma to stop.
You can then fix whatever is broken, like delete the pre_start file.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: /usr/bin/enigma2_pre_start.sh #12
-
- Member
- 3 posts
0
Neutral
Posted 30 September 2017 - 11:25
hi
Edited by deep, 30 September 2017 - 11:28.
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
