40 replies to this topic

[andres66]

1. .. how you got ciplushelper installed?

 

 

Daily I have HD51 in use with OpenATV, no problems to use CI+ modules... but want to move back to OpenPLi.

My  Mut@nt HD2400 works  with CI+ module and OpenPLI.

 

2. After clean OpenPLI flash, I have my internal HDD mounted to  mnt/media/usb/

 Clean OpenPLi install, no any settings were (auto)restored. Daily in use is OpenATV, HDD always is mounted to mnt/media/hdd/

 

4GB is my USB stick, FAT32 formatted, it's for images install and only. It's removed already after image flash and HD51 is fully restarted,

but still have this and 1 TB internal HDD is still automounted  - mnt/media/usb/

 

[Tech]

The ci-plus-helper is available in the feeds.
Just press
menu-plugins-green button-extensions-ciplushelper

[andres66]

The ci-plus-helper is available in the feeds.
Just press
menu-plugins-green button-extensions-ciplushelper

 

 I know.

See please - collected errors, plugin can't be installed with fresh Pli-4.0 image from August 29, this error I got also last week and this was also two weeks ago, when I for ciplushelper test temporary moved to OpenPLi.

 

Screenhot :

 

Attached Files

•  pli-ciplushelper-hd51.jpg   55.41KB   12 downloads

Edited by andres66, 29 August 2016 - 13:43.

[Robinson]

Guys, is Mutant HD51 the same as AX HD51? Just a different brand name with the same hardware or not?

[betacentauri]

Almost the same. Different case and remote. Everything else is afaik the same.

[bril]

 

The ci-plus-helper is available in the feeds.
Just press
menu-plugins-green button-extensions-ciplushelper

 

 I know.

See please - collected errors, plugin can't be installed with fresh Pli-4.0 image from August 29, this error I got also last week and this was also two weeks ago, when I for ciplushelper test temporary moved to OpenPLi.

 

Screenhot :

 

I have the same problem with the image of September 29, see http://forums.openpl...ndpost&p=595420

 

 

Edited by bril, 3 October 2016 - 06:14.

[Robinson]

Almost the same. Different case and remote. Everything else is afaik the same.

Thanks.

I assume OpenPLi works on both.

[betacentauri]

Afaik yes. Maybe some problems with the remote as its a different one. Perhaps somebody else has already tested it ...

[malakudi]

OpenPLi works fine on AX HD51. However, I am not impressed with the driver quality.

[WTE]

OpenPLi works fine on AX HD51. However, I am not impressed with the driver quality.

 

Why not ?

I think it's pretty impressive how it works just after it's 2 months in the market.

Edited by WTE, 4 October 2016 - 16:48.

[Erik Slagter]

As long as all bugs are properly addressed, I am fine with it. There are enough manufacturers that never address bug reports.

[Rob van der Does]

Depends on how long they do so. VU has also had a period in which they addressed bugs swift and good. But once they were the #1 on the market, they stopped doing so, relying completely on VTi & BH to work-around all issues (as those are the VU-images that are widely used).

[WTE]

ciplushelper openpli4 HD51

 

 

Attached Files

•  enigma2-plugin-extensions-ciplushelper_1.0-r1_hd51.ipk   42.35KB   73 downloads

[mazouzi3131]

Hello,
I purchased an hd51 and the picture is blurred with an interpolation issue. I realized this problem on a big screen 3,5 m ( front projection) do someone has this kind of problem? I am using openpli
Thanks

[bril]

ciplushelper openpli4 HD51

Thank you

[red007]

Hello,

How are things with mygica t230 or dvbsky t330 drivers.

If i tryed to use these usb dvb-t2 sticks two weeks ago then these sticks are not working. Can anybody tell me why these not working with pli?

In ATV or hdf images these usb tuners work without any problem.

[bril]

 

ciplushelper openpli4 HD51

Thank you

 

Installing is no problem, but is not working with Ziggo Ci+, authentication failed after 60 seconds, error 17.

Now again using OpenATV, works fine.

Edited by bril, 14 October 2016 - 06:06.

[littlesat]

How are things with mygica t230 or dvbsky t330 drivers.

If i tryed to use these usb dvb-t2 sticks two weeks ago then these sticks are not working. Can anybody tell me why these not working with pli?

In ATV or hdf images these usb tuners work without any problem.

Maybe someone could find at OE-A on github what it required for these sticks to add... I tried to find it but I couldn't find it.... 

Edited by littlesat, 14 October 2016 - 11:54.

[red007]

As i sayed in other post, MyGica T230 and DVBSky T330 both working without any problems. (HD51, latest OpenPLI installed 22.10.2016).

 

You need to install drivers over telnet, using opkg install command (example: opkg install kernel-module-dvb-usb-cxusb).

T230 needs these:

kernel-module-dvb-usb-cxusb

firmware-dvb-fe-si2168

kernel-module-si2157

kernel-module-si2168

 

After drivers install and restart HD51 finds usb tuner but no picture. You need to change file in /lib/firmware directory (faulty file is dvb-demod-si2168-b40-01.fw). I found working dvb-demod-si2168-b40-01.fw file in openHDF image and replaced working file in pli and now this stick is working. Uploaded correct file here: https://www.upload.e...-b40-01.fw.html

T230 stick is working only in USB3.0 port!

 

DVBSky T330 is also working behind HD51 but simillar problems in PLI, some fw files needed to replace manually.

Somebody please fix this, don't know where report. If needed i can find correct replacement fw files for dvbsky t330 to.

 

I also find one other small bug. If automatic timeshift is started then REC1 light switches on.

This is not correct, it's timeshift not recording.

[Robinson]

Does anyone know if HD51 with OpenPLi works with Polsat CAM CI+ module?

https://www.cyfrowyp...-cam-ci-plus.cp

Perhaps the question is to Polish users only.

By the way, according to the description on their website, it has a legacy mode for older boxes/TV's.