29 replies to this topic

[guess]

I have a Vu + DUO2 with the latest edition of OpenPLi (update maybe a couple times a week)

In the recent past, it has got the idea to automatically switch from Standby to On.

Have tried to disable the HDMI-CEC but it gets the same behavior regardless've found a place where Wake On Lan is available but it is set to NO. After I pressed the Off (Standby) it takes about 2-3 minutes before switching to ON.

Is there anyone who can explain to me what I can do to stop this behavior? (or what is wrong?)

 

regards

[WanWizard]

For me it is not exactly clear what the behaviour is. What happens when you do what? And what do you want to happen?

[ricki]

The  boxen turns on by itself.

[guess]

For me it is not exactly clear what the behaviour is. What happens when you do what? And what do you want to happen?

I I set Box to standby and after two-three minutes it turns to ON by itselves! And I want it to stay in stand
by


Skickat från min iPhone med Tapatalk

[littlesat]

A full flash?

[guess]

A full flash?

I do not want to do a full flash!



Skickat från min iPhone med Tapatalk

[guess]

The  boxen turns on by itself.

Yes!

[littlesat]

Go with telnet/putty on your box and type df.... Imsuggest your flash is full.... Remove an unintended recording....

[zeros]

Standby / restart -> Sleep timer -> Enable wakeup timer -> no

[isteric2005]

also it happens to me with the latest update,
I put the decoder (zgemma H2H) in standby and after several minutes the receiver turns itself on.

Maybe something that does not work .....

 

also it happens to me with the latest update,
I put the decoder (zgemma H2H) in standby and after several minutes the receiver turns itself on.

Maybe something that does not work .....

 

also it happens to me with the latest update,
I put the decoder (zgemma H2H) in standby and after several minutes the receiver turns itself on.

Mayalso it happens to me with the latest update,

I put the decoder (zgemma H2H) in standby and after several minutes the receiver turns itself on.

 

Maybe something that does not work .....

 

 

anche a me succede con l'ultimo aggiornamento,

metto il decoder (zgemma H2H) in stanby e dopo alcuni minuti il decoder si accende da solo.

 

Forse che qualcosa che non funziona.....

Edited by isteric2005, 2 October 2016 - 20:14.

[S_Hopper]

Same with my VU+ Ultimo.

Verstuurd van mijn Galaxy Note 4

[isteric2005]

 

 

 

openpli 4 h3

 

 

h3 login: root

Password:

root@h3:~# df

Filesystem           1K-blocks      Used Available Use% Mounted on

ubi0:rootfs             222144     63160    158984  28% /

devtmpfs                156504         4    156500   0% /dev

tmpfs                       64         0        64   0% /media

tmpfs                   156628       280    156348   0% /var/volatile

/dev/sda1            120923392  52884480  66990336  44% /media/hdd

root@h3:~#

 

[guess]

vuduo2 login: root

Password: 

root@vuduo2:~# df

Filesystem           1K-blocks      Used Available Use% Mounted on

ubi0:rootfs             882968     81428    801540   9% /

devtmpfs                704264         4    704260   0% /dev

tmpfs                       64         0        64   0% /media

/dev/sda               7786496    478788   7307708   6% /media/usb

tmpfs                   704364       400    703964   0% /var/volatile

192.168.1.121:/volume1/video

                     2879621632 1800914496 1078604736  63% /media/net/nasse

[guess]

Standby / restart -> Sleep timer -> Enable wakeup timer -> no

I have those settings!

[isteric2005]

 

Standby / restart -> Sleep timer -> Enable wakeup timer -> no

I have those settings!

 

[littlesat]

Hopefully solved tomorrow when it is (auto)cablescan related....

[guess]

All of a sudden, without doing anything, everything works again. No turns on by itself since two hours now?? Strange!!


Skickat från min iPad med Tapatalk

[maumixio]

same here vusolo4k wakeup automatically after latest online update . no epg no wakeup timer .

[zeros]

Yes, I met it as well with yesterday's upgrade:

 

<  2621.733> 

<  2621.747> executing opkg  list-upgradable

<  2627.721> action ->  WizardActions back

<  2628.043> action ->  OkCancelActions cancel

<  2628.335> action ->  OkCancelActions cancel

<  2628.633> action ->  InfobarShowHideActions hide

<  2630.444> action ->  GlobalActions power_down

<  2630.782> [Standby] enter standby

<  2720.912> [AutoFastScan] Scan was not succesfully retry in one hour

<  2780.914> [AutoCableScan] start

<  2780.918> Traceback (most recent call last):

<  2780.919>   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/CableScan/plugin.py", line 245, in CableScanAuto

<  2780.921>     Session.openWithCallback(restartScanAutoStartTimer, CableScanAutoScreen)

<  2780.922>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback

<  2780.924>     dlg = self.open(screen, *arguments, **kwargs)

<  2780.925>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open

<  2780.927>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)

<  2780.928>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog

<  2780.929>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)

<  2780.930>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog

<  2780.932>     dlg = screen(self, *arguments, **kwargs)

<  2780.933>   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/CableScan/plugin.py", line 206, in __init__

<  2780.935>     self.scan.start(int(nimmanager.getNimListOfType("DVB-C")[0]))

<  2780.936> IndexError: list index out of range

and I hope this error is solved. It took place after a few minutes after standby the restart enigma2

Attached Files

•  Avoid-GSOD-when-no-tuners-are-configured-as-DVB-C-tuners.jpg   70.26KB   3 downloads

[Dimitrij]

This solved

CableScan: Avoid GSOD when no tuners are configured as DVB-C tuners