6 replies to this topic

[red-die]

Hi Every-body.

I have some difficultu with a usb wifi dongle : FRITZ!WLAN Stick AC 860 from vexson.

 

I can not see the wifi on network configuration, only the wired is visible.

 

With dmesg i see :

[ 1918.675000] usb 1-1: USB disconnect, device number 4
[ 1928.582000] usb 1-1: new high-speed USB device number 5 using ehci-brcm

 

With lsusb :

Bus 001 Device 005: ID 148f:5370
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001

 

I guess i have to install some driver or somthing else but i dont know wich one to use and i dont find ipk for this dongle.

 

If someone have an idea ?

 

Thanks a lot

 

(Excuse me for my poor english; i do my best )

 

Best regards.

[WanWizard]

That looks like an RaLink RT5370 chipset. Maybe one of the more technical people might now if we have a driver for it.

[red-die]

I have fixed the problem :

with telnet :

ipkg install kernel-module-carl9170
ipkg install kernel-module-rt2800usb
ipkg install kernel-module-rt73usb
ipkg install kernel-module-zd1211rw

reboot

 

I suppoe only one of theses package is necessary for my dongle but i have chosse to install all.

 

Thanks evrybody.

 

ps : Someone can help me to edit the topic as solved; thx

Edited by red-die, 14 January 2017 - 14:38.

[red-die]

I have another issue now

When i start a wifi scan; no wireless network appear

Still looking on this forum but actually i am stuck.

 

If someone could help ; you are welcome 

[WanWizard]

I think kernel-module-rt2800usb is the one you need.

 

If you can do a scan, that means the box has detected and initialized the interface. No idea why a scan wouldn't show anything.

[red-die]

I think too, on network configuration pannel on the wireless networks i can see rtl2800 device.

 

i have try

opkg remove kernel-module-carl9170
opkg remove kernel-module-rt73usb
opkg remove kernel-module-zd1211rw

but same issue

 

I will try to restart from a clean flash and only install the kernel-module-rt2800usb

i'll give you a feedback when it will be done.

[red-die]

Same issue; i am still looking for a solution