Super as always. This worked. Only Legend remain without epg.
<!-- 28.2E --><channel id="VirginMediaThree.ie">1:0:1:16B9:7D7:2:11A0000:0:0:0:</channel><!-- Virgin Media Three -->And rescan 28.2E
EPG for IPTV channels
Re: EPG for IPTV channels #521
Re: EPG for IPTV channels #522
Re: EPG for IPTV channels #523
Re: EPG for IPTV channels #524
Posted 19 October 2022 - 08:54
My receiver has EPG on this service ref.
And when I compare the schedule with the Schedule on tvguide.co.uk for this channel it corresponds.
However this channel is called on my receiver CBS Action.
I think, you to find the error on your receiver.
(you say you receive this channel via IPTV. Check the entry in the bouquet for this channel for typo's pls.)
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG for IPTV channels #525
Posted 20 October 2022 - 07:26
My receiver has EPG on this service ref.
And when I compare the schedule with the Schedule on tvguide.co.uk for this channel it corresponds.
However this channel is called on my receiver CBS Action.
I think, you to find the error on your receiver.
(you say you receive this channel via IPTV. Check the entry in the bouquet for this channel for typo's pls.)
Thanks, I finally solved it with your help as always.
Re: EPG for IPTV channels #526
Re: EPG for IPTV channels #527
Re: EPG for IPTV channels #528
Posted 30 October 2022 - 09:42
Re: EPG for IPTV channels #529
Re: EPG for IPTV channels #530
Posted 30 October 2022 - 10:03
So you want to load only EPG for channels defined in the custom.channels.xml?
If that is the case. Edit the rytec.sources.xml file.
Delete here this section:
<mappings> ..... </mappings>
And place a dummy rytec.channels.xml file in /etc/epgimport containing:
<?xml version="1.0" encoding="utf-8"?> <channels> </channels>
Edited by doglover, 30 October 2022 - 10:05.
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG for IPTV channels #531
Re: EPG for IPTV channels #532
Re: EPG for IPTV channels #533
Posted 30 October 2022 - 11:22
Can you obtain an epgimport.log pls
And post it, pls
(In the plug-in press menu and go to the log. Save the log and pick it up from the /tmp/ folder)
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG for IPTV channels #534
Re: EPG for IPTV channels #535
Posted 30 October 2022 - 13:57
I think I know it.
I made an error.
You still have this in your rytec.sources.xml file:
channels="rytec.channels.xml.xz">
Now this file does not exist. So the import fails somewhere.
You have to replace all these by
channels="rytec.channels.xml">
And this file exist.
I found out also that the setting "only import IPTV channels" does not work as expected.
One more thing: Restart enigma2 before attempting to import again. If you do not do this, it will still use the already downloaded rytec.channels.xml.xz file and import everything.
PS: I tried all this on one of my receivers.
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG for IPTV channels #536
Posted 30 October 2022 - 14:37
There is another way of achieving the same:
Use the standard rytec.sources.xml
In the Plug-in, press Menu and choose the Ignore list.
Add here all channels you do not want EPG to import.
You can select a complete provider (or more providers). Or select each channel separately.
Save the list.
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG for IPTV channels #537
Re: EPG for IPTV channels #538
Re: EPG for IPTV channels #539
Posted 8 November 2022 - 08:41
They should be included in the rytecBE_VL_Basic.xz file.
In EPGimport the source: Vlaanderen - Basis (xz)
Links:
<!-- Cable --><channel id="PlayMoreBlack.be">1:0:19:192:4:1:FFFF0000:0:0:0:</channel><!-- Play More Black --> <!-- Cable --><channel id="PlayMoreCinema.be">1:0:19:193:4:1:FFFF0000:0:0:0:</channel><!-- Play More Cinema --> <!-- Cable --><channel id="PlayMoreKicks.be">1:0:19:191:4:1:FFFF0000:0:0:0:</channel><!-- Play More Kicks -->
If you have these as IPTV, you have to add these links in the custom.channels.xml file.
~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)
Synology NAS
Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*
Re: EPG for IPTV channels #540
Posted 8 November 2022 - 23:50
They should be included in the rytecBE_VL_Basic.xz file.
In EPGimport the source: Vlaanderen - Basis (xz)
Links:
<!-- Cable --><channel id="PlayMoreBlack.be">1:0:19:192:4:1:FFFF0000:0:0:0:</channel><!-- Play More Black --> <!-- Cable --><channel id="PlayMoreCinema.be">1:0:19:193:4:1:FFFF0000:0:0:0:</channel><!-- Play More Cinema --> <!-- Cable --><channel id="PlayMoreKicks.be">1:0:19:191:4:1:FFFF0000:0:0:0:</channel><!-- Play More Kicks -->If you have these as IPTV, you have to add these links in the custom.channels.xml file.
It is indeed IPTV, but i have no custom channels.xml file.
Also how does this work, how does the system know that that IPTV channel is linked to that epg?
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users