9 replies to this topic

[gammgubbe]

Hi,

 

My box DM800HDse with OpenPli 4 reboots. Crashes with green screen and reboots in a loop. I took picture of the tv, see attachement. How do I access the log if needed since the box is stuck in reboot loop? Press front button when powering up the box?

 

What I can see from the log is it mentiones EPGImport and last line says "Errnr 28] No space left on device". I know the box has very little space left, should be couple MB though. SSD has 37% space left, since it is 480 GB it should be 177 GB left.I use Rytec's EPG and import a few countries, not all of them.

 

Any help how to make my box behave normally would be greately appreciated I have DCC but not sure I can use it since box doesn't boot up.

 

 

 DM crash.jpg   320.66KB   4 downloads

 

[littlesat]

Your flash memory if full... please telnet to the box and find what made it full and delete something... -or- reflash....

[gammgubbe]

Thanks, but how if box is rebooting? Can I access it with DCC despite it can't finish boot?

[Pr2]

Give it a try and you have the answer. 

[littlesat]

Use telnet or putty to access your box

[MiLo]

Reflash the box, it's the only reliable way out.

[gammgubbe]

Neither DCC nor Putty worked since box kept rebooting. Had to re-flash. 3 Mb free after re-flash.. time to delete some junk and install flash expander or something...   

[WanWizard]

You have 20-30 seconds to telnet in after the box boots. So you're not quick enough.

[littlesat]

Does it completely reboot or does enigma2 restart... the gsod indicated a complete reboot so you should be able to open a telnet session

[gammgubbe]

If it had stayed up, maybe but it kept rebooting so even if I had been able to establish telnet I think it would die immediately when box rebooted. Is there a setting that prevents box from rebooting if crashing? It may had been useful this time

 

Re-flased box with SatDreamGr I think it was called, it asked if I wanted to load saved settings and I said yes and got almost everything back within minutes. Now I'll see if I can get BBC 27.5W and PowerVu at same time. But first flash expander...