Posted 7 April 2017 - 15:29
hi
i,m used from pli 4.0 and for all plugins used from pli online plugin center
but some plugins is too old,for example oscam version now is 11359 in plugin center
but latest for pli 4.0 is 11381,about skin exactlly has this problems!!!!
why?how can i use from latest version?
Posted 7 April 2017 - 16:20
Hi,
OScam is open source and then you can compile it yourself and install it on your box.
Name the file oscam and transfert it to /usr/bin so full file path and name is: /usr/bin/oscam . check that its chmod is 755.
Then restart oscam and you will have the latest version.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 7 April 2017 - 16:37
Yes, there is a script, you could take a look at http://www.satnigmo....lebuild-script/
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 7 April 2017 - 16:41
If there is a need to update to a newer Oscam version, let us know, and we'll update to a newer revision.
However, If it is just "to have the latest", it's not going to happen. The bleeding edge always comes with new bugs...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 April 2017 - 17:20
If there is a need to update to a newer Oscam version, let us know, and we'll update to a newer revision.
However, If it is just "to have the latest", it's not going to happen. The bleeding edge always comes with new bugs...
hi
no master
latest have better work,so we have to use from latest version,no just be latest for beauty,thanks for your think.
Posted 7 April 2017 - 17:23
Hi,
OScam is open source and then you can compile it yourself and install it on your box.
Name the file oscam and transfert it to /usr/bin so full file path and name is: /usr/bin/oscam . check that its chmod is 755.
Then restart oscam and you will have the latest version.
Pr2
i,m exactlly do this work but after latest to bin and replace it with beafor oscam.bin after restart my oscam atall not work,all channel is downand show befor id version of it in infobar
what now man?
Posted 7 April 2017 - 17:25
latest have better work,so we have to use from latest version,no just be latest for beauty,thanks for your think.
What exactly works better? What bugs are fixed or features are added that you can not live without?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 April 2017 - 17:35
Posted 7 April 2017 - 17:50
The only place you can download anything is via menu - plugins - green button.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 April 2017 - 19:37
Posted 7 April 2017 - 20:28
latest have better work,so we have to use from latest version,no just be latest for beauty,thanks for your think.
What exactly works better? What bugs are fixed or features are added that you can not live without?
Dont send msg goodbye in case late cw might arrive
Fix for local cards initialized twice
remove is_defined.txt on make distclean
More detailed log if authentication fails
Revised code to detect Local card change
Gbx local cards updated only after physical local card eject/detect
i think alwaye latest version have less bug.
i wish update it always in update center,thanks.
Posted 7 April 2017 - 20:36
i think alwaye latest version have less bug.
i wish update it always in update center,thanks.
You think wrong. I can read a commit log too, but that doesn't tell me the reason to update it.
Perhaps when we switch to separate stable and development images, we can revise this policy, but for now, the current version is stable for virtually all users, and the log entries you posted don't really create the need for an update.
and opkg download... but I think as open source, why not an open app download center?
What is your definition of "an open app download center"? And why is that different from the current download list?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 7 April 2017 - 22:44
@skystar2,
You do something wrong when replacing the oscam binary.
Be sure that your FTP is in passive mode and use binary file transfer.
The name is oscam and not oscam.bin
If it complaints because the file is in use in telnet type:
/etc/init.d/softcam stop
Then replace the /usr/bin/oscam
In telnet:
chmod 755 /usr/bin/oscam
/etc/init.d/softcam start
Be careful with pre-compiled version of OScam that you found on the internet (so select option that you don't need and that even can prevent it to run on your system) it is better to compile your own oscam with the feature that you really need.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 7 April 2017 - 22:56
What is your definition of "an open app download center"? And why is that different from the current download list?
Edited by daveraver, 7 April 2017 - 22:56.
Posted 8 April 2017 - 11:38
Why do you need that, you can download and install them directly on the box?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 April 2017 - 14:03
Posted 8 April 2017 - 14:08
I know that, but as it is yet more work, I was wondering what the use-case was. There is hardly ever a need to download an ipk with your browser, and install it on the box manually.
Besides that, we currently block a lot of traffic to our download servers, as they are already misused for other purposes than supporting the users of genuine OpenPLi images, something for which we have to pick up the substantial tab.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 8 April 2017 - 16:33
Hi,
If you run an OpenPLi image and if you want a list of packages simply use telnet command:
opkg update
opkg list
To know what is already on your box simply type:
opkg list-installed
Or of course you can also browse in OpenPLi itself from the GUI.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 8 April 2017 - 20:05
In the GUI you will only see packages with a name that starts with "enigma2-plugin".
As a typical user, there is no need so see the others, they are system packages, and should be defined as dependency of a plugin, if and where needed. If you are a non-typical user, you are expected to have enough knowledge about the system and know your way on the commandline.
What we want to avoid is typical users fooling around will all sorts of ipk files, and use either ours on other images, or the other way around. Contrary to popular belief, not all enigma images are the same, so chances are things will fail, and when they do, these typical users come here to complain about it, and wasting our time doing so.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 9 April 2017 - 21:21
@skystar2,
You do something wrong when replacing the oscam binary.
Be sure that your FTP is in passive mode and use binary file transfer.
The name is oscam and not oscam.bin
If it complaints because the file is in use in telnet type:
/etc/init.d/softcam stop
Then replace the /usr/bin/oscam
In telnet:
chmod 755 /usr/bin/oscam
/etc/init.d/softcam start
Be careful with pre-compiled version of OScam that you found on the internet (so select option that you don't need and that even can prevent it to run on your system) it is better to compile your own oscam with the feature that you really need.
Pr2
thanks man,still notjing
i,m put ftp on standby mode,then start your sugggests,but nothing and nothing!!!why?
0 members, 3 guests, 0 anonymous users
