24 replies to this topic

[Maverick1302]

Hi,

 

ich nutze die ganze Zeit über schon das Softcam Modul CCcam um meine Sky v14 Karte mit OpenPLi zu betreiben. Nun ist mir aufgefallen, dass der neue Sky1 Sender nicht hell wird und eine Suche mit Google hat zu Tage gefördert, dass dies mit Oscam wohl funktionieren soll, da Sky für den neuen Sender eine andere Verschlüsselung nutzt. Oscam ist installiert, aber ich bekomme weder die bisherigen Skysender, noch den neuen hell. Auch die normalen HD-Sender RTL HD, Sat1 HD etc. klappen nicht. Ich vermute, da muss noch etwas in den Configdateien von Oscam gedreht werden, ich weiß nur nich was.

Das Log von Oscam sieht folgendermaßen aus:

2017/04/16 12:08:24 00000000 s     (main) System name    = Linux
2017/04/16 12:08:24 00000000 s     (main) Host name      = et9x00
2017/04/16 12:08:24 00000000 s     (main) Release        = 3.8.7
2017/04/16 12:08:24 00000000 s     (main) Version        = #1 SMP Sat Feb 4 00:42:01 CET 2017
2017/04/16 12:08:24 00000000 s     (main) Machine        = mips
2017/04/16 12:08:24 00000000 s     (main) Stb model      = dm800se
2017/04/16 12:08:24 00000000 s     (main) Stb boxtype    = et9200
2017/04/16 12:08:24 00000000 s     (main) creating pidfile /tmp/oscam.pid with pid 522
2017/04/16 12:08:24 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/04/16 12:08:24 00000000 s     (main) signal handling initialized
2017/04/16 12:08:24 00000000 s   (config) 10 provid's loaded
2017/04/16 12:08:24 00000000 s   (config) 164 service-id's loaded in 17 ms
2017/04/16 12:08:24 00000000 s      (net) monitor: initialized (fd=5, port=988)
2017/04/16 12:08:24 00000000 s   (reader) v14 [internal] creating thread for device /dev/sci0
2017/04/16 12:08:24 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/04/16 12:08:24 00000000 s     (main) waiting for local card init
2017/04/16 12:08:24 6214A824 r   (reader) v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/04/16 12:08:24 6214A824 r   (reader) v14 [internal] Reader sci internal, detected box type: et9200
2017/04/16 12:08:25 759A6D14 h    (webif) webif: decompressed 176851 bytes back into 434896 bytes
2017/04/16 12:08:25 759A6D14 h    (webif) HTTP Server running. ip=:: port=8088
2017/04/16 12:08:26 00000000 s     (main) init for all local cards done
2017/04/16 12:08:26 00000000 s (anticasc) anti cascading disabled
2017/04/16 12:08:26 474B4977 c   (client) plain dvbapi-client granted (local, au=on (1 reader))
2017/04/16 12:08:26 474B4977 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2017/04/16 12:08:26 474B4977 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/04/16 12:08:29 474B4977 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1A17 PROVID: 000000 
2017/04/16 12:08:29 474B4977 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1B17 PROVID: 000000 
2017/04/16 12:08:29 474B4977 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1F17 PROVID: 000000 
2017/04/16 12:08:29 474B4977 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in caPMT
2017/04/16 12:08:29 474B4977 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/04/16 12:08:29 474B4977 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in PMT
2017/04/16 12:08:33 474B4977 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/04/16 12:09:48 474B4977 c        (-) -- Skipped 14 duplicated log lines --
2017/04/16 12:10:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:11:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:12:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:13:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:14:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:15:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:16:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:17:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:18:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:19:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:20:48 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:21:49 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:22:49 474B4977 c        (-) -- Skipped 12 duplicated log lines --
2017/04/16 12:23:49 474B4977 c        (-) -- Skipped 12 duplicated log lines --

Evtl. brauche ich auch eine andere Oscam Version? Laut Weboberfläche habe ich diese hier:  

• OSCam: 1.20-unstable_svn Build: r11359 Compiler: mipsel-oe-linux

[Pumuckel]

- Auf Oscam umzusteigen ist auf jeden Fall sehr empfehlenswert, weil CCcam keine EMMs blockt und damit deine Karte mehr als ohnehin zur Zeit pairinggefährdet wäre.

- Sky1 wird sichelich auch unter OScam nicht hell

 

Zu deinem Problem, warum derzeit nichts hell wird:
Poste mal deine Konfigurationsdaten von Oscam (oscam.conf., oscam.server und oscam.user) ... dann sehen wir weiter

Edited by Pumuckel, 16 April 2017 - 13:39.

[Maverick1302]

Gerne!

Oscam.conf

[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 1500
preferlocalcards = 1
emmlogdir = /var/log/

[dvbapi]
enabled = 1
au = 1
delayer = 1
user = local
boxtype = et9200

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15

[webif]
httpport = 8088
httpuser = username
httppwd = passwort
httprefresh = 10
httpshowecminfo = 1
httpallowed = 10.0.0.0-10.0.0.255
aulow = 120
hideclient_to = 15

Oscam.server:

[reader]
label = v14
protocol = internal
device = /dev/sci0
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

Oscam.user:

[account]
user = local
au = v14
group = 1

Edited by Maverick1302, 17 April 2017 - 10:01.

[Pumuckel]

Versuche es mal so:
--> nach den Änderungen OScam neu starten, damit die Änderungen übernommen/wirksam werden.

oscam.conf

Spoiler

[global]
logfile                       = /tmp/oscam.log
maxlogsize                    = 1500
preferlocalcards              = 2
emmlogdir                     = /var/log/
nice                          = -1

[dvbapi]
enabled                       = 1
au                            = 1
user                          = local
boxtype                       = dreambox

[webif]
httpport                      = 8088
httpallowed                   = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

oscam.server

Spoiler

[reader]
label                         = SkyV14
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
ndsversion                    = 2
detect                        = cd
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,10
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

oscam.user

Spoiler

[account]
user                          = local
au                            = 1
group                         = 1

Der Boxtype "et9200" ist mir unbekannt --> lt. Oscam-Wiki gibt es folgende Boxtypen:
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc

Deshalb habe ich dreambox eingetragen --> falls dies nicht funktioniert, kannst Du es ja wieder mit anderen Typen testen.

Edited by Pumuckel, 17 April 2017 - 11:02.

[Maverick1302]

Danke für die Hilfe. ich habe die Dateien entsprechend angepasst und sogar die Box neu gestartet, allerdings ohne Erfolg. Hier das Log:

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Thu Jan  1 01:00:18 1970
-------------------------------------------------------------------------------
1970/01/01 01:00:18 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11359 (mipsel-oe-linux)
1970/01/01 01:00:18 00000000 s     (main) System name    = Linux
1970/01/01 01:00:18 00000000 s     (main) Host name      = et9x00
1970/01/01 01:00:18 00000000 s     (main) Release        = 3.8.7
1970/01/01 01:00:18 00000000 s     (main) Version        = #1 SMP Sat Feb 4 00:42:01 CET 2017
1970/01/01 01:00:18 00000000 s     (main) Machine        = mips
1970/01/01 01:00:18 00000000 s     (main) Stb model      = dm800se
1970/01/01 01:00:18 00000000 s     (main) Stb boxtype    = et9200
1970/01/01 01:00:18 00000000 s     (main) The current system time is smaller than the build date (Apr  9 2017). Waiting up to 60 seconds for time to correct
2017/04/17 15:30:30 00000000 s     (main) creating pidfile /tmp/oscam.pid with pid 418
2017/04/17 15:30:30 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/04/17 15:30:30 00000000 s     (main) signal handling initialized
2017/04/17 15:30:30 00000000 s   (config) 10 provid's loaded
2017/04/17 15:30:30 00000000 s   (config) 164 service-id's loaded in 6 ms
2017/04/17 15:30:30 00000000 s   (reader) SkyV14 [internal] creating thread for device /dev/sci0
2017/04/17 15:30:30 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/04/17 15:30:30 00000000 s     (main) waiting for local card init
2017/04/17 15:30:30 65B5DDFA r   (reader) SkyV14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2017/04/17 15:30:30 65B5DDFA r   (reader) SkyV14 [internal] Reader sci internal, detected box type: et9200
2017/04/17 15:30:30 3E53F429 h    (webif) webif: decompressed 176851 bytes back into 434896 bytes
2017/04/17 15:30:30 3E53F429 h    (webif) HTTP Server running. ip=:: port=8088
2017/04/17 15:30:32 00000000 s     (main) init for all local cards done
2017/04/17 15:30:32 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam/oscam.emmcache in 0 ms
2017/04/17 15:30:32 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam/oscam.emmstat in 0 ms
2017/04/17 15:30:32 00000000 s (anticasc) anti cascading disabled
2017/04/17 15:30:32 17D4C9B8 c   (client) plain dvbapi-client granted (local, au=auto (1 reader))
2017/04/17 15:30:32 17D4C9B8 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2017/04/17 15:30:32 17D4C9B8 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CEA PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19EA PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1BEA PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AEA PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: 1EEA PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1DEA PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 186D ECM_PID: 1DEB PROVID: 000000 
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in caPMT
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/04/17 15:30:35 17D4C9B8 c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in PMT
2017/04/17 15:30:39 17D4C9B8 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

[Pumuckel]

Kommst Du auf das OScam-Webif? --> Box-IP:8088

 

Wenn ja, wie wird die Karte unter Status angzeigt? "Error" oder "CARDOK" oder "need init" oder ähnliches?
Gehe im OScam-Webif auf den Reiter "files" und poste mal was dort unter oscam.conf, oscam.server, oscam.user, oscam.dvbapi und oscam.services angezeigt wird.

Welcher Payload wird im OScam-Webif angezeigt --> "Reader" und dann auf das "i" klicken

[Maverick1302]

 

Oscam.conf:

[global]
logfile                       = /tmp/oscam.log
maxlogsize                    = 1500
preferlocalcards              = 2
emmlogdir                     = /var/log/
nice                          = -1

[dvbapi]
enabled                       = 1
au                            = 1
user                          = local
boxtype                       = dreambox

[webif]
httpport                      = 8088
httpallowed                   = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

oscam.server:

[reader]
label                         = SkyV14
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
ndsversion                    = 2
detect                        = cd
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,1,10
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

oscam.user:

[account]
user                          = local
au                            = 1
group                         = 1

oscam.dvbapi:

File does not exist or no file selected!

oscam.services

File does not exist or no file selected!

[Maverick1302]

Die Karte wird unter CARDOK angezeigt:

Readers 1/1 (0 of 1 CARDOK)

AU On

Address::1

Port 0

Protocol: Internal

SRVID:CAID@PROVID 0000:0000@000000

LB Value/Reader no Data

Status OFF

(no entitlements)

[Maverick1302]

Was die Payload angeht, da weiß ich nicht ob ich richtig bin, aber unter Readers unter dem i Symbol findet sich nichts. 

Valid to n/a

IRD ID Nagra n/a

Manturity n/a

Serial 00 00 00 00

[Pumuckel]

Was für eine OScam-Version verwendest Du? Hast Du die aktuelle vom Feed?

[Maverick1302]

Ich habe die, die ich in der OpenPLi Standard Einrichtung installieren kann. oscam (svn11356-r0.1)

Wie kann ich diesen Feed einbinden und die aktuellste Version herunterladen?

[Maverick1302]

Auf der Weboberfläche steht 1.20_unstable_svn Build r11359

[Pumuckel]

Die Version passt dann schon

 

- Hier mal Bilder wie man den Payload ablesen kann:

 

- bitte mal ein komplettes Startlog posten (nicht zu früh abbrechen)

[Maverick1302]

Ein Startlog der Box oder von Oscam? 

Einfach die Logdatei aus einem bestimmten Verzeichnis posten, oder wie mache ich das?

[Pumuckel]

Startlog von OScam --> /tmp/oscam.log

die Box sollte natürlich auf einem abonniertem Kanal stehen

Edited by Pumuckel, 18 April 2017 - 20:39.

[Maverick1302]

 

-------------------------------------------------------------------------------

>> OSCam <<  cardserver log switched at Tue Apr 18 19:13:24 2017

-------------------------------------------------------------------------------

2017/04/18 19:13:24 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11359 (mipsel-oe-linux)

2017/04/18 19:13:24 00000000 s     (main) System name    = Linux

2017/04/18 19:13:24 00000000 s     (main) Host name      = et9x00

2017/04/18 19:13:24 00000000 s     (main) Release        = 3.8.7

2017/04/18 19:13:24 00000000 s     (main) Version        = #1 SMP Sat Feb 4 00:42:01 CET 2017

2017/04/18 19:13:24 00000000 s     (main) Machine        = mips

2017/04/18 19:13:24 00000000 s     (main) Stb model      = dm800se

2017/04/18 19:13:24 00000000 s     (main) Stb boxtype    = et9200

2017/04/18 19:13:24 00000000 s     (main) creating pidfile /tmp/oscam.pid with pid 472

2017/04/18 19:13:24 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2017/04/18 19:13:24 00000000 s     (main) signal handling initialized

2017/04/18 19:13:24 00000000 s   (config) 10 provid's loaded

2017/04/18 19:13:24 00000000 s   (config) 164 service-id's loaded in 7 ms

2017/04/18 19:13:24 00000000 s   (reader) SkyV14 [internal] creating thread for device /dev/sci0

2017/04/18 19:13:24 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2017/04/18 19:13:24 00000000 s     (main) waiting for local card init

2017/04/18 19:13:24 6351F49E r   (reader) SkyV14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2017/04/18 19:13:24 6351F49E r   (reader) SkyV14 [internal] Reader sci internal, detected box type: et9200

2017/04/18 19:13:24 424336F5 h    (webif) webif: decompressed 176851 bytes back into 434896 bytes

2017/04/18 19:13:24 424336F5 h    (webif) HTTP Server running. ip=:: port=8088

2017/04/18 19:13:26 00000000 s     (main) init for all local cards done

2017/04/18 19:13:26 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam/oscam.emmcache in 1 ms

2017/04/18 19:13:26 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam/oscam.emmstat in 0 ms

2017/04/18 19:13:26 00000000 s (anticasc) anti cascading disabled

2017/04/18 19:13:26 64325692 c   (client) plain dvbapi-client granted (local, au=auto (1 reader))

2017/04/18 19:13:26 64325692 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache

2017/04/18 19:13:26 64325692 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CEC PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19EC PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1BEC PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AEC PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: 1EEC PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1DEC PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 186D ECM_PID: 1DED PROVID: 000000 

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in caPMT

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

2017/04/18 19:13:29 64325692 c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in PMT

2017/04/18 19:13:33 64325692 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2017/04/18 19:14:48 64325692 c        (-) -- Skipped 14 duplicated log lines --

2017/04/18 19:15:48 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:16:48 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:17:48 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:18:48 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:19:48 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:20:48 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:21:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:22:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:23:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:24:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:25:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:26:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:27:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:28:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:29:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:30:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:31:49 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:32:50 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:33:50 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:34:50 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:35:50 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:36:50 64325692 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 19:37:07 424336F5 h        (-) -- Skipped 4 duplicated log lines --

2017/04/18 19:37:07 424336F5 h    (webif) Refresh Accounts requested by WebIF from 10.0.0.21

2017/04/18 19:37:07 424336F5 h   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2017/04/18 19:37:07 424336F5 h   (config) userdb 1 accounts freed

2017/04/18 19:37:11 64325692 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2017/04/18 19:38:11 64325692 c        (-) -- Skipped 11 duplicated log lines --

2017/04/18 19:38:17 64325692 c        (-) -- Skipped 2 duplicated log lines --

2017/04/18 19:38:17 64325692 c   (dvbapi) Demuxer 0 stop descrambling program number EF75 (1830@000000:EF75 unknown)

2017/04/18 19:38:17 424336F5 h    (webif) HTTP Server stopped

2017/04/18 19:38:17 00000000 s   (dvbapi) dvbapi channelcache saved to /etc/tuxbox/config/oscam/oscam.ccache

2017/04/18 19:38:17 00000000 s (emmcache) saved 0 emmcache records to /etc/tuxbox/config/oscam/oscam.emmcache in 0 ms

2017/04/18 19:38:17 00000000 s (emmcache) saved 0 emmstat records to /etc/tuxbox/config/oscam/oscam.emmstat in 0 ms

2017/04/18 19:38:17 00000000 s   (client) killing client 

2017/04/18 19:38:17 00000000 s   (reader) SkyV14 [internal] Killing reader

2017/04/18 19:38:18 00000000 s   (config) userdb 1 accounts freed

2017/04/18 19:38:18 00000000 s   (config) readerdb 1 readers freed

2017/04/18 19:38:18 00000000 s     (main) cardserver down

 

-------------------------------------------------------------------------------

>> OSCam <<  cardserver log switched at Tue Apr 18 22:05:55 2017

-------------------------------------------------------------------------------

2017/04/18 22:05:55 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11359 (mipsel-oe-linux)

2017/04/18 22:05:55 00000000 s     (main) System name    = Linux

2017/04/18 22:05:55 00000000 s     (main) Host name      = et9x00

2017/04/18 22:05:55 00000000 s     (main) Release        = 3.8.7

2017/04/18 22:05:55 00000000 s     (main) Version        = #1 SMP Sat Feb 4 00:42:01 CET 2017

2017/04/18 22:05:55 00000000 s     (main) Machine        = mips

2017/04/18 22:05:55 00000000 s     (main) Stb model      = dm800se

2017/04/18 22:05:55 00000000 s     (main) Stb boxtype    = et9200

2017/04/18 22:05:55 00000000 s     (main) creating pidfile /tmp/oscam.pid with pid 12108

2017/04/18 22:05:56 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2017/04/18 22:05:56 00000000 s     (main) signal handling initialized

2017/04/18 22:05:56 00000000 s   (config) 10 provid's loaded

2017/04/18 22:05:56 00000000 s   (config) 164 service-id's loaded in 4 ms

2017/04/18 22:05:56 00000000 s   (reader) SkyV14 [internal] creating thread for device /dev/sci0

2017/04/18 22:05:56 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

2017/04/18 22:05:56 00000000 s     (main) waiting for local card init

2017/04/18 22:05:56 51CD7CBC r   (reader) SkyV14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)

2017/04/18 22:05:56 51CD7CBC r   (reader) SkyV14 [internal] Reader sci internal, detected box type: et9200

2017/04/18 22:05:56 12BB09CC h    (webif) webif: decompressed 176851 bytes back into 434896 bytes

2017/04/18 22:05:56 12BB09CC h    (webif) HTTP Server running. ip=:: port=8088

2017/04/18 22:05:57 00000000 s     (main) init for all local cards done

2017/04/18 22:05:57 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam/oscam.emmcache in 0 ms

2017/04/18 22:05:57 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam/oscam.emmstat in 0 ms

2017/04/18 22:05:57 00000000 s (anticasc) anti cascading disabled

2017/04/18 22:05:57 713E3F90 c   (client) plain dvbapi-client granted (local, au=auto (1 reader))

2017/04/18 22:05:57 713E3F90 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache

2017/04/18 22:05:57 713E3F90 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)

2017/04/18 22:06:00 713E3F90 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1A03 PROVID: 000000 

2017/04/18 22:06:00 713E3F90 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1B03 PROVID: 000000 

2017/04/18 22:06:00 713E3F90 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1F03 PROVID: 000000 

2017/04/18 22:06:00 713E3F90 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in caPMT

2017/04/18 22:06:00 713E3F90 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

2017/04/18 22:06:00 713E3F90 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in PMT

2017/04/18 22:06:04 713E3F90 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2017/04/18 22:07:19 713E3F90 c        (-) -- Skipped 14 duplicated log lines --

2017/04/18 22:08:19 713E3F90 c        (-) -- Skipped 12 duplicated log lines --

2017/04/18 22:09:19 713E3F90 c        (-) -- Skipped 12 duplicated log lines --

[Pumuckel]

Da wird nirgendwo deine Karte eingelesen --> so müsste ein Startlog ausehen:

2017/04/18 22:18:01 00000000 s (main) Host name = vusolose
2017/04/18 22:18:01 00000000 s (main) Release = 3.13.5
2017/04/18 22:18:01 00000000 s (main) Version = #1 SMP Sat Feb 4 13:37:23 CET 2017
2017/04/18 22:18:01 00000000 s (main) Machine = mips
2017/04/18 22:18:01 00000000 s (main) Stb model = dm8000
2017/04/18 22:18:01 00000000 s (main) Stb vumodel = vusolose
2017/04/18 22:18:01 00000000 s (main) Stb boxtype = vusolose
2017/04/18 22:18:01 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 31449
2017/04/18 22:18:01 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2017/04/18 22:18:01 00000000 s (aes) 14 AES key(s) added on reader SRG/TNTSAT for 0500@030b00
2017/04/18 22:18:01 00000000 s (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2017/04/18 22:18:01 00000000 s (main) signal handling initialized
2017/04/18 22:18:01 00000000 s (config) 10 provid's loaded
2017/04/18 22:18:01 00000000 s (config) 259 service-id's loaded in 2 ms
2017/04/18 22:18:01 00000000 s (config) 69 tier-id's loaded
2017/04/18 22:18:01 00000000 s (reader) HD01 [internal] creating thread for device /dev/sci0
2017/04/18 22:18:01 00000000 s (reader) ORF [mouse] creating thread for device /dev/ttyUSB0
2017/04/18 22:18:01 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/04/18 22:18:01 00000000 s (main) waiting for local card init
2017/04/18 22:18:01 3CA51668 h (webif) webif: decompressed 176851 bytes back into 434896 bytes
2017/04/18 22:18:01 3CA51668 h (webif) HTTP Server running. ip=:: port=8081
2017/04/18 22:18:01 4362C02E r (reader) HD01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/04/18 22:18:01 4362C02E r (reader) HD01 [internal] Reader sci internal, detected box type: vusolose
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Buffers readed 0 bytes total time_us 75207
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 1 value 3b time_us 4045
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 2 value 78 time_us 1897
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 3 value 12 time_us 941
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 4 value 00 time_us 943
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 5 value 00 time_us 956
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 6 value 54 time_us 1951
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 7 value c4 time_us 970
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 8 value 03 time_us 955
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 9 value 00 time_us 955
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 10 value 8f time_us 1963
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 11 value f1 time_us 1094
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 12 value 90 time_us 770
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Flush readed byte Nr 13 value 00 time_us 940
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Buffers readed 13 bytes total time_us 94191
2017/04/18 22:18:01 0F4FB10F r (reader) ORF [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2017/04/18 22:18:02 4362C02E r (reader) HD01 [internal] card detected
2017/04/18 22:18:02 0F4FB10F r (reader) ORF [mouse] card detected
2017/04/18 22:18:02 0F4FB10F r (reader) ORF [mouse] Buffers readed 0 bytes total time_us 75170
2017/04/18 22:18:03 4362C02E r (reader) HD01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2017/04/18 22:18:03 4362C02E r (reader) HD01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2017/04/18 22:18:03 4362C02E r (reader) HD01 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] Buffers readed 0 bytes total time_us 75147
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] Setting baudrate to 19200 bps
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] Calculated work ETU is 51.96 us reader mhz = 358
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] Buffers readed 0 bytes total time_us 75164
2017/04/18 22:18:03 0F4FB10F r (reader) ORF [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.58 MHz (specified in reader->mhz)
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [mouse] card detected
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [mouse] type: CryptoWorks
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [mouse] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [mouse] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [mouse] providers: 4 (04,08,0C,10)
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [mouse] found card system cryptoworks
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/04/18 22:18:04 0F4FB10F r (reader) ORF [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 000D, date: 2013/04/16 - 2013/05/16, name: Product 000D
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 0002, date: 2017/04/16 - 2017/12/22, name: Product 0002
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 7FF7, date: 2017/04/16 - 2017/04/26, name: Product 7FF7
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 0001, date: 2017/04/16 - 2017/12/22, name: Product 0001
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: FFE0, date: 2017/04/16 - 2017/12/22, name: Product FFE0
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 7FFB, date: 2017/04/15 - 2017/05/15, name: Product 7FFB
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: FFD8, date: 2014/02/13 - 2014/03/15, name: Product FFD8
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 001D, date: 2013/08/09 - 2013/11/09, name: Product 001D
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] chid: 0031, date: 2014/06/13 - 2014/09/13, name: Product 0031
2017/04/18 22:18:05 0F4FB10F r (reader) ORF [cryptoworks] ready for requests
2017/04/18 22:18:06 4362C02E r (reader) HD01 [internal] Buffers readed 0 bytes total time_us 3099575
2017/04/18 22:18:06 4362C02E r (reader) HD01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2017/04/18 22:18:06 4362C02E r (reader) HD01 [internal] Card responded ok for ifsd request of 251
2017/04/18 22:18:07 4362C02E r (reader) HD01 [internal] detect native nagra card
2017/04/18 22:18:08 4362C02E r (reader) HD01 [internal] ready for requests
2017/04/18 22:18:08 4362C02E r (reader) HD01 [internal] found card system nagra
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] ROM: D N A S P 1 4 2
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] REV: R e v G C 6
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] SER: ############
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] CAID: 1830
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] Prv.ID: 00 00 00 00
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] IRD ID: ############
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] active to: 2017/06/19 12:59
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] -----------------------------------------
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] |id |tier |valid from |valid to |
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] +----+--------+------------+------------+
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] |8011|0064 |2010/08/06 |2011/08/07 |
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] |8011|0BEA |2017/03/31 |2018/04/15 |
2017/04/18 22:18:08 4362C02E r (reader) HD01 [nagra] -----------------------------------------
2017/04/18 22:18:09 00000000 s (main) init for all local cards done

Auch wenn die Karte nicht korrekt eingelesen wird würde dies dann dort stehen

Edited by Pumuckel, 18 April 2017 - 21:26.

[shinji82]

Ich meine mich zu erinnern das es bei der Xtrend 9xxx Probleme mit den internen CardReadern und OSCam gab. Ob das behoben wurde kann ich nicht sagen

[Pumuckel]

Das wäre aber eine Erklärung, dass man die Karte nicht im LOG beim einlesen sieht

[Maverick1302]

Danke, der letzte Hinweis hat mir etwas in Erinnerung gerufen. Im unteren Kartenschacht funktioniert es nun. Die Sender laufen.

Danke!