Jump to content


Photo

HELP NEEDED: Offline decoding


  • Please log in to reply
133 replies to this topic

#1 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 7 June 2017 - 20:30

We are looking for people owning a CI module, and people using a softcam with a local smartcard (should be everyone!) to test the offline decoding capability of all OpenPLi supported hardware.
 
To test, do the following:

  • Stop the softcam, and remove all CI modules from the box
  • Make a short test recording from an encoded channel that uses a smartcard, using a timer, with Recording type "don't descramble, record ECM"
  • When done, do the same, but then from an encoded channel that uses the CI module

In case you have a smartcard that works in both a CI and with a softcam, one recording is enough.
 
Now play back the recording(s), to make sure your screen stays black.
 
Start your softcam again, make sure the smartcard is operational, and play the first recording back again. If you now have an image, your box supports offline decoding via the softcam. Stop the softcam again, insert the CI module with the smartcard, and play back the second recording. If you  now have an image, your box supports offline decoding via de CI.
 
We would like to know, for each supported box, what the results are. Please respond in this thread with:
 
Box: <brand and model of the box>
 
Supports offline decoding via softcam: Yes / No
Supports offline decoding via CI: Yes / No

Please do not post anything else, to keep this topic clean.



Re: HELP NEEDED: Offline decoding #2 WanWizard

  • PLi® Core member
  • 68,309 posts

+1,719
Excellent

Posted 7 June 2017 - 20:34

Box: Mutant HD 2400
 
Supports offline decoding via softcam: Yes
Supports offline decoding via CI: No


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Pro (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.


Re: HELP NEEDED: Offline decoding #3 jpuigs

  • Senior Member
  • 1,143 posts

+32
Good

Posted 7 June 2017 - 23:44

BOX : XTREND ET10000

 

Supports offline decoding via softcam: Yes
Supports offline decoding via CI: Sorry, I can't test it, I have no CI module.


Enigma is getting old....

 

Spoiler

Re: HELP NEEDED: Offline decoding #4 Tech

  • Forum Moderator
    PLi® Core member
  • 14,598 posts

+458
Excellent

Posted 8 June 2017 - 17:33

BOX : Mutant HD51

 

Supports offline decoding via softcam: Yes
Supports offline decoding via CI: No


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

 

On the edge of the abyss, a step forward is not always progress....


Re: HELP NEEDED: Offline decoding #5 Tech

  • Forum Moderator
    PLi® Core member
  • 14,598 posts

+458
Excellent

Posted 8 June 2017 - 17:34

BOX : VuPlus Solo4k

 

Supports offline decoding via softcam: No
Supports offline decoding via CI: No.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

 

On the edge of the abyss, a step forward is not always progress....


Re: HELP NEEDED: Offline decoding #6 Tech

  • Forum Moderator
    PLi® Core member
  • 14,598 posts

+458
Excellent

Posted 8 June 2017 - 17:34

BOX : VuPlus Ultimo4k

 

Supports offline decoding via softcam: No
Supports offline decoding via CI: No.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

 

On the edge of the abyss, a step forward is not always progress....


Re: HELP NEEDED: Offline decoding #7 Tech

  • Forum Moderator
    PLi® Core member
  • 14,598 posts

+458
Excellent

Posted 8 June 2017 - 17:35

BOX : VuPlus Zero4k

 

Supports offline decoding via softcam: No
Supports offline decoding via CI: No.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

 

On the edge of the abyss, a step forward is not always progress....


Re: HELP NEEDED: Offline decoding #8 Tech

  • Forum Moderator
    PLi® Core member
  • 14,598 posts

+458
Excellent

Posted 8 June 2017 - 18:12

BOX : Miraclebox Premium twin+

 

Supports offline decoding via softcam: No
Supports offline decoding via CI: No.


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....

 

On the edge of the abyss, a step forward is not always progress....


Re: HELP NEEDED: Offline decoding #9 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 8 June 2017 - 19:27

Maybe this helps ;-) Please feel free to check.

 

Unfortunately I didn't ever test with CI on all of these (or got the report from others).

 

Receiver:

 

vuultimo4k softcam: no, ci: no
vusolo4k softcam: no, ci: no
vuuno4k softcam: no, ci: no
formuler1: softcam: yes, ci: dunno
formuler3: softcam: yes, ci: dunno
formuler4: softcam: yes, ci: dunno
formuler4turbo: softcam: yes, ci: dunno
hd11: softcam: yes, ci: dunno
hd1200: softcam: yes, ci: dunno
hd1265: softcam: yes, ci: dunno
hd1500: softcam: yes, ci: dunno
hd2400: softcam: yes, ci: dunno

hd530c: softcam: yes, ci: dunno

 vuduo2: softcam: no, ci: no
vuduo: softcam: no, ci: no
vusolo2: softcam: no, ci: no
vusolo: softcam: no, ci: no
vusolose: softcam: no, ci: no
vuultimo: softcam: no, ci: no
vuuno: softcam: no, ci: no
vuzero: softcam: no, ci: no
fusionhd: softcam: yes, ci: dunno
fusionhdse: softcam: yes, ci: dunno

purehd: softcam: yes, ci: dunno
et10000: softcam: yes, ci: dunno
et5x00: softcam: yes, ci: dunno
et6x00: softcam: yes, ci: dunno
et7x00: softcam: no, ci: dunno
et8000: softcam: yes, ci: dunno
et8500: softcam: no, ci: dunno
et9x00: softcam: yes, ci: dunno
h3: softcam: yes, ci: dunno
h4: softcam: yes, ci: dunno
h5: softcam: yes, ci: dunno
h7: softcam: yes, ci: dunno
i55: softcam: yes, ci: dunno
xp1000: softcam: yes, ci: dunno
et4x00: softcam: yes, ci: dunno
hd500c: softcam: yes, ci: dunno
hd1100: softcam: yes, ci: dunno
lc: softcam: yes, ci: dunno
sh1: softcam: yes, ci: dunno


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: HELP NEEDED: Offline decoding #10 hawkeye116477

  • Senior Member
  • 34 posts

0
Neutral

Posted 9 June 2017 - 15:13

Box: Miraclebox Premium Micro

 

Supports offline decoding via softcam: No
Supports offline decoding via CI: Sorry, I can't test it, I have no CI module.


Edited by hawkeye116477, 9 June 2017 - 15:14.


Re: HELP NEEDED: Offline decoding #11 zeeteefje

  • Senior Member
  • 1,605 posts

+24
Neutral

Posted 9 June 2017 - 16:45

BOX : XTREND ET10000

 

Supports offline decoding via softcam: Yes
Supports offline decoding via CI: No



Re: HELP NEEDED: Offline decoding #12 zeeteefje

  • Senior Member
  • 1,605 posts

+24
Neutral

Posted 9 June 2017 - 16:45

BOX : XTREND ET9000

 

Supports offline decoding via softcam: Yes
Supports offline decoding via CI: No


Edited by zeeteefje, 9 June 2017 - 16:45.


Re: HELP NEEDED: Offline decoding #13 blzr

  • PLi® Core member
  • 2,269 posts

+118
Excellent

Posted 10 June 2017 - 09:27

BOX : Vimastec VS1500

Supports offline decoding via softcam: Yes

 

BOX : Edision OSMEGA

Supports offline decoding via softcam: Yes

 

BOX : Xsarius FUSIONHDSE

Supports offline decoding via softcam: No

 

CI - no have ;) so can't test...

 


True sarcasm doesn't need green font...

Re: HELP NEEDED: Offline decoding #14 40H3X

  • Forum Moderator
    PLi® Contributor
  • 5,782 posts

+186
Excellent

Posted 10 June 2017 - 12:47

BOX : Xsarius FUSIONHDSE

Supports offline decoding via softcam: No

 

@blzr Thnx but strangely that's a discrepancy with Erik's list in reply #9, but as you tested it.


Edited by 40H3X, 10 June 2017 - 12:48.

Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K  - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport

---------------------------------------------------------------------------------------------------------------------------------------

Remember: Upvote with the rep_up.png button for any user/post you find to be helpful, informative, or deserving of recognition!

---------------------------------------------------------------------------------------------------------------------------------------

Many answers to your question can be found in our new and improved wiki

Note: I do not provide support via PM !.


Re: HELP NEEDED: Offline decoding #15 doglover

  • Rytec EPG Team
  • 16,974 posts

+635
Excellent

Posted 10 June 2017 - 13:14

BOX : ET9500

 

Supports offline decoding via softcam: Yes
Supports offline decoding via CI: No

 

 

BOX : VUduo

 

Supports offline decoding via softcam: No
Supports offline decoding via CI: No

 

Willy


Edited by doglover, 10 June 2017 - 13:14.

~~Rytec Team~~
Maxytec Multibox SE OpenPli (used as mediaplayer)
Mutant HD2400 OpenPli
Vu+ Duo OpenPli (backup)

Synology NAS

Sat: 13E, 19.2E, 23.5E and 28.2E
*Pli/Rytec EPG POWERED*


Re: HELP NEEDED: Offline decoding #16 blzr

  • PLi® Core member
  • 2,269 posts

+118
Excellent

Posted 10 June 2017 - 17:49

 

BOX : Xsarius FUSIONHDSE

Supports offline decoding via softcam: No

 

@blzr Thnx but strangely that's a discrepancy with Erik's list in reply #9, but as you tested it.

 

 

actually double triple tested this - worksforme NOT ;)

 

@Erik?


True sarcasm doesn't need green font...

Re: HELP NEEDED: Offline decoding #17 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 10 June 2017 - 18:22

 

BOX : Xsarius FUSIONHDSE

Supports offline decoding via softcam: No

 

@blzr Thnx but strangely that's a discrepancy with Erik's list in reply #9, but as you tested it.

I tested with fusionhd and there it worked....

 

Maybe newer versions of the drivers?


Edited by Erik Slagter, 10 June 2017 - 18:23.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: HELP NEEDED: Offline decoding #18 blzr

  • PLi® Core member
  • 2,269 posts

+118
Excellent

Posted 11 June 2017 - 09:21

flashed yesterday's develop image - still can't offline decode...

 

(and this recording made with fusionhdse can be offline decoded on vs1500 without any problem)


True sarcasm doesn't need green font...

Re: HELP NEEDED: Offline decoding #19 Erik Slagter

  • PLi® Core member
  • 46,951 posts

+541
Excellent

Posted 11 June 2017 - 10:24

I believe you :)


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: HELP NEEDED: Offline decoding #20 ims

  • PLi® Core member
  • 13,607 posts

+210
Excellent

Posted 12 June 2017 - 10:34

Box: DM800se

 

Supports offline decoding via softcam: Yes
Supports offline decoding via CI: Sorry, I can't test it, I have no CI module.


Kdo nic nedělá, nic nezkazí!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users