Hi guys! I’ve a problem with a Formuler 3 receiver and OpenPLI 6.0.
I can’t decoding offline the recording with the softcam.
I follow your instruction but unfortunately when I restart the softcam and start the recording the display remains black and the timer is very fast up to the end.
I tried also to decoding offline (menu button on the recording and “decoding offline”) but the receiver crash!
Thanks for your support!
HELP NEEDED: Offline decoding
Started by WanWizard, 07 Jun 2017 20:30
133 replies to this topic
Re: HELP NEEDED: Offline decoding #81
-
- Senior Member
- 37 posts
0
Neutral
Posted 13 January 2018 - 10:46
Re: HELP NEEDED: Offline decoding #82
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 28 January 2018 - 09:43
You need to record ECM's as well, that is not default. Did you try that?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: HELP NEEDED: Offline decoding #83
-
- Senior Member
- 37 posts
0
Neutral
Posted 17 February 2018 - 11:47
I tried but nothing..
Could be an oscam config problem?
Because I hava also problem with the records during the receiver in stanby...To have a correct recording (descrambled)I need to let switch on the receiver on the channel to record.
Thanks!
Could be an oscam config problem?
Because I hava also problem with the records during the receiver in stanby...To have a correct recording (descrambled)I need to let switch on the receiver on the channel to record.
Thanks!
Re: HELP NEEDED: Offline decoding #84
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 17 February 2018 - 17:24
It can also be that the current driver version actually don't support offline decoding.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: HELP NEEDED: Offline decoding #85
-
- Senior Member
- 37 posts
0
Neutral
Posted 17 February 2018 - 21:29
Really? But in the firsts post is write that Formuler f3 works with softcam.
Then is better to wait the release 6.2?
Then is better to wait the release 6.2?
Re: HELP NEEDED: Offline decoding #86
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 21 February 2018 - 20:11
I don't know, at some point a few years ago we checked it for all models and it seems some models don't feature offline encoding with the latest drivers.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: HELP NEEDED: Offline decoding #87
-
- Senior Member
- 2,621 posts
+30
Good
Posted 24 February 2018 - 18:55
Maybe it is a stupid question but what is the difference between "offline decoding" as discussed in this thread and "delayed decoding" as indicated to be working well for VU+ here:
https://wiki.openpli...ion=4#VU.2B_UHD
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: HELP NEEDED: Offline decoding #88
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 24 February 2018 - 19:02
Nothing. I think "offline decoding" is a weird term, as nothing happens "offline"...
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: HELP NEEDED: Offline decoding #89
-
- Senior Member
- 2,621 posts
+30
Good
Posted 24 February 2018 - 20:14
So it is the same thing?
Then why is it reported here as "no" for VU+ while on wiki it is shown as "+"?
Edited by Robinson, 24 February 2018 - 20:15.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: HELP NEEDED: Offline decoding #90
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 24 February 2018 - 20:18
As far as we know VU+ has implemented it in their drivers, at least for the "modern" series of boxes.
For which box exactly doesn't it work? It is easy enough to test: stop your softcam, make a recording and make sure you record ECM's as well. Stop the recording, start the softcam, play back the recording.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: HELP NEEDED: Offline decoding #91
-
- Senior Member
- 2,621 posts
+30
Good
Posted 24 February 2018 - 20:58
I do not have a VU+ box. I just read the reports in this thread and everybody says "no".
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: HELP NEEDED: Offline decoding #92
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 25 February 2018 - 04:50
As far as we know VU+ has implemented it in their drivers, at least for the "modern" series of boxes.
VU+ only implemented offline/delayed decoding in their 4k boxes.
Nevertheless the menu entry is available on all boxes, which is rather confusing.
Re: HELP NEEDED: Offline decoding #93
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 25 February 2018 - 09:21
Not true, it's also available on the mipsel receivers, but I didn't test it myself.
The confusion may be because they only obtained the feature quite recentely, I think some 3-4 months ago.
Edited by Erik Slagter, 25 February 2018 - 10:36.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: HELP NEEDED: Offline decoding #94
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 25 February 2018 - 10:34
OK, new for me. I'll give it a test then 
Re: HELP NEEDED: Offline decoding #95
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 25 February 2018 - 10:47
Not true, it's also available on the mipsel receivers, but I didn't test it myself.
The confusion may be because they only obtained the feature quite recentely, I think some 3-4 months ago.
OK, new for me. I'll give it a test then
You're right: just tested on DUO2 and indeed working fine (both playback of not-decoded file and offline decoding).
Good to know that!
Do you know if this applies to all (recent) VU-MIPSEL boxes? I mean boxes like Ultimo & UNO.
Re: HELP NEEDED: Offline decoding #96
-
- Senior Member
- 2,621 posts
+30
Good
Posted 25 February 2018 - 11:58
So the information contained in the initial pages of this thread regarding VU+ is no longer true? Good to know.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: HELP NEEDED: Offline decoding #97
-
- PLi® Core member
- 10,331 posts
+350
Excellent
Posted 25 February 2018 - 12:13
VU+solo4k not work(use oscam)
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: HELP NEEDED: Offline decoding #98
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 25 February 2018 - 12:20
Not true, it's also available on the mipsel receivers, but I didn't test it myself.
The confusion may be because they only obtained the feature quite recentely, I think some 3-4 months ago.
OK, new for me. I'll give it a test then
You're right: just tested on DUO2 and indeed working fine (both playback of not-decoded file and offline decoding).
Good to know that!
Do you know if this applies to all (recent) VU-MIPSEL boxes? I mean boxes like Ultimo & UNO.
For information: I tested using Oscam, as I have no CAM.
Re: HELP NEEDED: Offline decoding #99
-
- Senior Member
- 7,766 posts
+184
Excellent
Posted 26 February 2018 - 16:51
Just tested (old) Ultimo, running PLi 6.1, Oscam with local card: no offline decoding possible.
This is what I meant by 'misleading': the menu entry 'Start offline decode' is available, and the process seems to start, but ends with a zero byte file.
Re: HELP NEEDED: Offline decoding #100
-
- PLi® Core member
- 70,552 posts
+1,813
Excellent
Posted 26 February 2018 - 17:04
As far as I can see in the code, there is no hardware feature coupled to this menu item, so the menu entry seems to be shown on every box.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
5 user(s) are reading this topic
0 members, 5 guests, 0 anonymous users
