Good day to everyone. Please help There is no overscan wizard in system menu for ET11000.
Gi ET11000 no overscan wizard
Started by gelo498, 30 Jun 2017 07:28
16 replies to this topic
Re: Gi ET11000 no overscan wizard #2
-
- PLi® Core member
- 57,446 posts
+708
Excellent
Posted 30 June 2017 - 08:20
It should have...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Gi ET11000 no overscan wizard #3
-
- Member
- 4 posts
0
Neutral
Posted 30 June 2017 - 10:30
But there is no such line in the system menu. I can't post the link with photo. And there is no support for usb wifi adapters. I've tried 3 which work perfect with openpli 4.0 for et7000 mini.
Edited by gelo498, 30 June 2017 - 10:31.
Re: Gi ET11000 no overscan wizard #4
-
- PLi® Core member
- 70,880 posts
+1,833
Excellent
Posted 30 June 2017 - 10:31
It is possible that the manufacturers BSP misses a kernel driver. What drivers are used by the et7000mini?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Gi ET11000 no overscan wizard #5
-
- Forum Moderator
PLi® Contributor - 5,967 posts
+191
Excellent
Posted 30 June 2017 - 10:38
Is there support for the ET11000?
Good day to everyone. Please help There is no overscan wizard in system menu for ET11000.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Gi ET11000 no overscan wizard #6
-
- PLi® Core member
- 70,880 posts
+1,833
Excellent
Posted 30 June 2017 - 10:46
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Gi ET11000 no overscan wizard #7
-
- Forum Moderator
PLi® Contributor - 5,967 posts
+191
Excellent
Posted 30 June 2017 - 10:48
Ah, die had ik ff gemist 
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Re: Gi ET11000 no overscan wizard #8
-
- PLi® Core member
- 46,969 posts
+542
Excellent
Posted 30 June 2017 - 18:14
Good day to everyone. Please help There is no overscan wizard in system menu for ET11000.
Ok, back to the real issue.
If the overscan wizard does not show, it means the relevant interface is not available in the drivers. Only the manufacturer can add that interface.
Edited by Erik Slagter, 30 June 2017 - 18:14.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: Gi ET11000 no overscan wizard #9
-
- PLi® Core member
- 2,345 posts
+121
Excellent
Posted 30 June 2017 - 18:56
I can not confirm this problem.
On develop image in GI ET11000 I have overscan wizard.
The openpli-4 uses the same drivers, so obviously the problem is not a drivers.
Is it possible that the user can not find this in the menu, or translation is incorrect?
Edited by Taapat, 30 June 2017 - 18:56.
Re: Gi ET11000 no overscan wizard #10
-
- PLi® Core member
- 57,446 posts
+708
Excellent
Posted 30 June 2017 - 19:19
You need our default 1920x1080 default skin to trigger the overscan wizard in the startupwizard....
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Gi ET11000 no overscan wizard #11
-
- Member
- 4 posts
0
Neutral
Posted 1 July 2017 - 10:12
so if the problem is not in the openpli image, why openatv 6.1 for et11000 has overscan settings and usb wifi adapters work perfect? I like your image more. I'v tried several openpli 4.0 images for et1100 from your offical download page , even i've found openpli 5.0 in other forum. I installed the version 5 and overscan wizard appeared in the settings menu, but still usb wifi adapters are not detected.
Re: Gi ET11000 no overscan wizard #12
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 1 July 2017 - 10:27
Please check with RC: https://openpli.org/...ad/gi/ET-11000/
Also what is your wifi adapter? Did you check feeds for driver?
Also what is your wifi adapter? Did you check feeds for driver?
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: Gi ET11000 no overscan wizard #13
-
- PLi® Core member
- 57,446 posts
+708
Excellent
Posted 1 July 2017 - 10:27
What USB adapter?
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Gi ET11000 no overscan wizard #14
-
- Member
- 4 posts
0
Neutral
Posted 27 July 2017 - 09:59
Hello. overscan wizard appeared in RC. as for usb wifi adapters i use SWF-3S4T( lsusb shows 148f:5370), TEW-664UB (148f:2870). as before they are not detected.
Edited by gelo498, 27 July 2017 - 10:00.
Re: Gi ET11000 no overscan wizard #15
-
- PLi® Core member
- 70,880 posts
+1,833
Excellent
Posted 27 July 2017 - 12:29
You will need to know the drivers needed for those sticks, and install them. We don't install them by default.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Gi ET11000 no overscan wizard #16
-
- PLi® Core member
- 2,345 posts
+121
Excellent
Posted 27 July 2017 - 15:25
The problem with wifi drivers is because they are not listed in Gi ET11000 MACHINE_FEATURES.
Fix waiting for GI merge in their bsp already 2 days: https://github.com/G.../meta-gi/pull/6
Re: Gi ET11000 no overscan wizard #17
-
- PLi® Core member
- 70,880 posts
+1,833
Excellent
Posted 27 July 2017 - 15:30
We'll have to send them a reminder then. I'm pretty sure they don't follow up that account.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
