Posted 4 July 2017 - 11:52
When I watch any channel from the satellite ..?!
Not sure if we have a 6500 still in the team. However, since this is an end of life box, there aren't any driver updates anymore. According to the BSP, the 6x00 drivers are over 3 years old. So I can't immediately think of something that could cause this.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 July 2017 - 12:43
Posted 4 July 2017 - 12:49
Ok ... Thanks ... I installed on Vu + DUO and it works great, there is no freezing of the image, so there seems to be another problem with Xtrenda6500 ... I ask for another help: How to install picons on Vu + DUO? Thank you...
Posted 4 July 2017 - 12:59
How can i change the skin?
Posted 4 July 2017 - 13:21
No idea what mediaplayer is. Why don't you use the built-in player?
That's this one i use, the media player standard in the PLi 6.
Pause what kind of movie? Recording or media file like mkv?
Same problem with the 2 kind of file : recording and, avi, mkv, etc...
I think it is a problem of media player but i am not sure, and it's why i ask for a better media player, if there is one ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 4 July 2017 - 15:25
vu+solo4k-OpenPLi4
Posted 4 July 2017 - 16:49
I think it is a problem of media player but i am not sure, and it's why i ask for a better media player, if there is one ?
Recordings are played back via hardware, other media via gstreamer (software), two completely different paths.
It is not a key mapping problem, that you press "stop" (or the box sees "stop") instead of pause? I can not reproduce it here.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 July 2017 - 16:59
VU+ Ultimo 4K:
RC 6.0.
2.) Most times when I turn on the tuner from standby, I'll get a flickering picture when using cableTV. It almost looks like interferance. I have to restart to get a normal picture. I am using a VU+ FBC-DVB-C cableTV tunermodule.
(This is not a problem on tested Blackhole img).
No problem on DVB-S2 module.
I have never seen this on mine. Do you have the DVB-C FBC tuner in the FIRST tuner slot?
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 4 July 2017 - 17:00
An oepsie...
No, a segmentation fault.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 4 July 2017 - 17:04
When I watch any channel from the satellite ..?!
Not sure if we have a 6500 still in the team. However, since this is an end of life box, there aren't any driver updates anymore. According to the BSP, the 6x00 drivers are over 3 years old. So I can't immediately think of something that could cause this.
I am really thinking of a hardware defect here.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 4 July 2017 - 17:05
I think it is a problem of media player but i am not sure, and it's why i ask for a better media player, if there is one ?
Recordings are played back via hardware, other media via gstreamer (software), two completely different paths.
It is not a key mapping problem, that you press "stop" (or the box sees "stop") instead of pause? I can not reproduce it here.
Maybe he is referring to streams? Along with lots of other information that's missing here...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 4 July 2017 - 17:46
How can i change the skin?
Posted 4 July 2017 - 18:12
Maybe need this?
This is normal setup for all users..
This topic is locked
def SkinSelSetup(menuid, **kwargs):
# only show in the menu when set to intermediate or higher
-if menuid == "video" and config.usage.setup_level.index >= 1:
+ if menuid == "video":
return [(_("Skin"), SkinSelMain, "skin_selector", None)]
return []
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Posted 4 July 2017 - 18:36
Multibootimage HD51 don´t start
Posted 4 July 2017 - 18:48
Just finish trying out new img and i don't see any significal diferrance 
Maybe menu config are better regroup.But still missing to me in Full HD skin , on channel list in left down corner should de (like in VTI) more next epg positions, like -NEXT, LATER, AFTER ( so at least 3 or even 4 next epg short ).This is very usefull to me , otherwise have to switch to full EPG.Or maybe whole skin should be as Pro version with full customization 
.VTI has it 
.Besides one thing suprise me, that DVB drivers are from 22 of may 2017 and there is no problems with tuners C and D, like now in PLI 4 with drivers from 28 december 2016 
So VU+ deliver to you proper drivers but to old img they still waiting ?
Sony OLED 83' A90J 
Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 4 July 2017 - 19:20
How can i change the skin?
change setup mode to expert then search for skin selection under audio/video tab.
Posted 4 July 2017 - 19:49
HD 51 Multiboot:
can´t unmount/oldroot_bind: no such file or directory
Posted 4 July 2017 - 19:53
Media file MKV does not play
Edited by ricki, 4 July 2017 - 19:53.
Posted 4 July 2017 - 19:55
Posted 4 July 2017 - 20:26
VU+ Ultimo 4K:
RC 6.0.
2.) Most times when I turn on the tuner from standby, I'll get a flickering picture when using cableTV. It almost looks like interferance. I have to restart to get a normal picture. I am using a VU+ FBC-DVB-C cableTV tunermodule.
(This is not a problem on tested Blackhole img).
No problem on DVB-S2 module.
I have never seen this on mine. Do you have the DVB-C FBC tuner in the FIRST tuner slot?
My hardware configuration: Tuner A slot: DVB-S2-FBC, NIM (45208 FBC) tuner A-H
Tuner B slot: DVB-C- FBC, NIM (BCM3148) tuner I-P
Tuner C slot: switchable DVB-T or C, NIM(TT3L10) tuner Q-R
Picture freezes and a sort of flickering picture. I am unable to select another DVB-C channel.
0 members, 9 guests, 0 anonymous users
