Posted 4 July 2017 - 20:53
With my Duo2, when i press "pause", the file stop redaing, but the image doesn't stay on the screen and at her place, i have the list of the media player.*
When i press "pause" or "play" again, the movie restarts normally.
I don't know how i can explain this differently.
What do you need as information to find a solution ?
Edited by zebulon7, 4 July 2017 - 20:55.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 4 July 2017 - 21:46
HD 51 Multiboot:
can´t unmount/oldroot_bind: no such file or directory
Posted 4 July 2017 - 22:04
sorry if it has been asked before and delete. ppanel is not working on this new image
Posted 4 July 2017 - 22:32
Just finish trying out new img and i don't see any significal diferrance.
Apart from some rearranging of the menu's, there is no visual difference. There are a lot of technical differences though.
But still missing to me in Full HD skin ... <cut> This is very usefull to me
And so everyone has their own taste and requirements. Find a skin that suits yours, and install it.
Besides one thing suprise me, that DVB drivers are from 22 of may 2017 and there is no problems with tuners C and D, like now in PLI 4 with drivers from 28 december 2016
So VU+ deliver to you proper drivers but to old img they still waiting ?
OpenPLi 4 development has been frozen for a few weeks now, pending the new release. So it could well be the old BSP was updated as well, we haven't checked.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 4 July 2017 - 23:17
Todays or rather yesterday build got old drivers BSP, i' ve checked this , nothing changed yet , i hope soon. 
Other skins totally doesn't match to me , that's why i only prefer Full HD skin. 
Sony OLED 83' A90J 
Panasonic UHD UB9000 , DENON AVC-A1H, Atmos 7.1.4 , VU+ DUO 4K SE ,VU+ Ultimo 4K Full config, 180 cm Parabolic DISH/ Dual LNB - Full orbit 75E-45W , 80 cm offset dish with unicable LNB for Hot Bird. Humax Icord HD , DUNE HD Max Vision 4K.
Posted 5 July 2017 - 05:57
pli multiboot images works only with pli images, no other team can use this
update with usb destroy the original partition and create complete new, this was the problem pli must add rootfs.bz2 and kernel1.bin this was better and not use the unflexibel mutant way
Edited by babsy98, 5 July 2017 - 05:58.
Posted 5 July 2017 - 06:08
Posted 5 July 2017 - 11:20
Edited by daveraver, 5 July 2017 - 11:21.
Posted 5 July 2017 - 14:01
Posted 5 July 2017 - 15:07
The menu is available in 3 levels of "difficultly", "basic", "advanced" and "expert".
By default it is set to "basic" which is enough for the average user, and hides complexity. You can alter in via setup -> settings -> customize if you want to see more options.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 July 2017 - 15:12
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 5 July 2017 - 15:14
Thanks. Still have to get used to having a decent wiki now!
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 July 2017 - 15:17
Your welcome, btw nice new logo (thumbs up) 
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
Posted 5 July 2017 - 15:31
Thanks.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 5 July 2017 - 16:28
Thanx both, guys
Posted 5 July 2017 - 17:53
VU+ Ultimo 4K:
RC 6.0.
2.) Most times when I turn on the tuner from standby, I'll get a flickering picture when using cableTV. It almost looks like interferance. I have to restart to get a normal picture. I am using a VU+ FBC-DVB-C cableTV tunermodule.
(This is not a problem on tested Blackhole img).
No problem on DVB-S2 module.
I have never seen this on mine. Do you have the DVB-C FBC tuner in the FIRST tuner slot?
My hardware configuration: Tuner A slot: DVB-S2-FBC, NIM (45208 FBC) tuner A-H
Tuner B slot: DVB-C- FBC, NIM (BCM3148) tuner I-P
Tuner C slot: switchable DVB-T or C, NIM(TT3L10) tuner Q-R
Picture freezes and a sort of flickering picture. I am unable to select another DVB-C channel.
Just what I said. If you have a closer look on the box the Ultimo came in, you will see the DVB-C FBC tuner MUST BE in the FIRST SLOT.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 5 July 2017 - 17:55
OpenPLi 4 development has been frozen for a few weeks now, pending the new release. So it could well be the old BSP was updated as well, we haven't checked.Besides one thing suprise me, that DVB drivers are from 22 of may 2017 and there is no problems with tuners C and D, like now in PLI 4 with drivers from 28 december 2016
The OpenPLi 4 VU+ BSP hasn't been updated on purpose. Most receivers now work quite well, we don't want to spoil that with new drivers.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 5 July 2017 - 18:44
Nobody to solve the problem of pause ?
Another question : when a new verson will be available, will be necessary to download it or it will automatically be installed on our vu+ ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 5 July 2017 - 20:43
I hope this is the right place to report a problem with version 6 which I have just installed on Vuplus Ultimo 4K . This machine has the Vu+ C/DVB-T2 card but no DVB-T2 channels are found by the service scan ( i.e. no HD ). I have tried both manual and automatic scans including using channel and frequency specific ones on a channel which I know to be present. Please note that the same problem occurred with the pre-installed Vuplus image but I was able to fix it with the latest VuPlus image. Is some kind of Vu+ driver update needed for OpenPLi? I'm hoping I can stick with this implementation which in my opinion strikes a good balance between functionality and complexity.
Posted 5 July 2017 - 20:46
Another question : when a new verson will be available, will be necessary to download it or it will automatically be installed on our vu+ ?
At the moment, major releases require a download + flash. If you use the autobackup plugin (with autoinstall activated) to make a backup on your harddisk or an USB stick. you can flash without losing your settings or installed plugins (if installed from our feeds).
Minor releases (6.1, 6.2, etc) can be updated from the box. OpenPLi never installs anything automatically.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 12 guests, 0 anonymous users
This topic is locked
