Thanx it's working.
OpenPLi 6.0 » Release candidate
Re: OpenPLi 6.0 » Release candidate #221
Re: OpenPLi 6.0 » Release candidate #222
Re: OpenPLi 6.0 » Release candidate #223
Re: OpenPLi 6.0 » Release candidate #224
Posted 6 July 2017 - 18:05
Inside same version you can upgrade that version. If there will be an 6.1 that's new flash again.
Yes and no...
If you are brave enough you can simply switch feeds and everything should be fine, as long as the OE remains the same.
# 6.0-rc to 6.0 sed -i 's/openpli-6.0-rc/openpli-6.0/' /etc/opkg/*.conf # 6.0-rc to 6.1 sed -i 's/openpli-6.0-rc/openpli-6.1/' /etc/opkg/*.confAlthough most probably using autobackup will be fast enough without half broken image.
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: OpenPLi 6.0 » Release candidate #225
Re: OpenPLi 6.0 » Release candidate #226
Re: OpenPLi 6.0 » Release candidate #227
Posted 6 July 2017 - 19:03
Usualy swithing feeds does not works out good. Libs, and binaries are mixed. On the end image doesen't work
You may assume that athoik is aware of that fact. And yes, the intention is that it can be done without risk. If it proves to be impossible/risky in this case (6.0 -> 6.1) we will advertise that fact.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: OpenPLi 6.0 » Release candidate #228
Posted 6 July 2017 - 19:07
Just a last request...wueh 6.0 final was released...i can upgrade this version or i must flash entire new image ?
You need to flash again. The R/C is just a test image, "not to be used in production".
p.s. if you make a backup, make sure you check "autoinstall", so the restore also reinstalls your plugins again (note: not the onces you have installed manually, only onces from our feeds).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #229
Posted 6 July 2017 - 19:24
VU+ Ultimo 4K:
RC 6.0.
2.) Most times when I turn on the tuner from standby, I'll get a flickering picture when using cableTV. It almost looks like interferance. I have to restart to get a normal picture. I am using a VU+ FBC-DVB-C cableTV tunermodule.
(This is not a problem on tested Blackhole img).
No problem on DVB-S2 module.
I have never seen this on mine. Do you have the DVB-C FBC tuner in the FIRST tuner slot?
My hardware configuration: Tuner A slot: DVB-S2-FBC, NIM (45208 FBC) tuner A-H
Tuner B slot: DVB-C- FBC, NIM (BCM3148) tuner I-P
Tuner C slot: switchable DVB-T or C, NIM(TT3L10) tuner Q-R
Picture freezes and a sort of flickering picture. I am unable to select another DVB-C channel.
Just what I said. If you have a closer look on the box the Ultimo came in, you will see the DVB-C FBC tuner MUST BE in the FIRST SLOT.
I have switched the tuners and it's ok for sure. This box came readymade from my dealer. That was the problem
Still, there is a problem with teletext transparency. I cannot change it to fully black background.
Re: OpenPLi 6.0 » Release candidate #230
Posted 6 July 2017 - 19:25
So your dealer needs a pair of glasses or just a tad of patience
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: OpenPLi 6.0 » Release candidate #231
Re: OpenPLi 6.0 » Release candidate #232
Posted 6 July 2017 - 19:30
See our notes on DMM support.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: OpenPLi 6.0 » Release candidate #233
Posted 6 July 2017 - 21:53
The plugins are called
enigma2-plugin-extensions-xmltvimport - 1.0+git110+127feaf-r0.0 enigma2-plugin-extensions-xmltvimport-rytec - 20170630-r0.0
so I think you need to check under X for "XMLTV..."
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #234
Re: OpenPLi 6.0 » Release candidate #235
Re: OpenPLi 6.0 » Release candidate #236
Re: OpenPLi 6.0 » Release candidate #237
Re: OpenPLi 6.0 » Release candidate #238
Posted 7 July 2017 - 11:13
Define "proper drivers"?
The BSP (hardware support layer) that supplies the drivers is maintained by the manufacturer. We have so use whatever they supply.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #239
Re: OpenPLi 6.0 » Release candidate #240
41 user(s) are reading this topic
0 members, 41 guests, 0 anonymous users