Posted 8 July 2017 - 07:24
The TV is set correctly. If I move the OSD in the tuner, it moves the entire infobar and it breaks on the left and does not look right, it looks. HbbTV is not working yet. When you press the red button no reaction.
Edited by WanWizard, 8 July 2017 - 11:43.
removed font markup
Posted 8 July 2017 - 07:28
Edited by betacentauri, 8 July 2017 - 07:29.
Posted 8 July 2017 - 07:50
Posted 8 July 2017 - 08:22
Sorry I'm not screaming. A large font I copied. First photo from OpenPLi 6.0 RC, second photo from OpenPLi 4.0. Same settings on TV and tuner. https://www.fotosik....91edc9bcb14b676 https://www.fotosik.pl/zdjecie/c7c80df9d257ee43
Posted 8 July 2017 - 08:48
So and yes, what is your point? Disable the overscan on your TV set, you will see whole picture, not 80% and you will also see the volume bar in all of it's glory.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 8 July 2017 - 08:55
Any news about MB HD51 in OEA-Images ?
Edited by willy01, 8 July 2017 - 08:55.
Posted 8 July 2017 - 08:55
If you (in expert mode) go to menu -> settings -> system -> Audio/Video -> Overscan wizard you can test for yourself. You should see the picture as below (with all arrow heads), if not your TV is not displaying all information send to it.
If there is no setting on the TV to use all information, you should use a non full HD skin
See https://wiki.openpli.org/Overscan
1_0_1_4B2E_810_600_FFFF0000_0_0_0.jpg 239.04KB
5 downloads
Edited by Dream1975, 8 July 2017 - 09:00.
Mutant HD2400, OpenPLi nightly, 2x DVB-C & 2x DVB-S
Mutant HD51, OpenPLi nightly, 1x DVB-C & 1x DVB-S
Wavefrontier T55 (Astra 1,2,3 en HB)
Smartcards Ziggo (Irdeto) and CDS (Seca) on Oscam
Posted 8 July 2017 - 09:00
Hello - I was waiting for funtiolńal HBTV pugin opera for any Formuler receiwer. By VU+,... it is running without any problems,.... only by eache Formuler under opera 1 it is inpossible. Is very big problem tu use higher version of openopera, or possibilities add that to addons? Due to that I have to use still OpenAtv instead os Openpli,..... pity.
Or: is existing any ipk higher version, like 1???
Thang
Pavel
Posted 8 July 2017 - 09:28
If you (in expert mode) go to menu -> settings -> system -> Audio/Video -> Overscan wizard you can test for yourself. You should see the picture as below (with all arrow heads), if not your TV is not displaying all information send to it.
If there is no setting on the TV to use all information, you should use a non full HD skin
See https://wiki.openpli.org/Overscan
Everything is set correctly. Simply programmed in OpenPLi, the volume bar was a little farther from the edge of the left side. That's all. Can you change the position of the volume bar programmatically? https://www.fotosik....0c2c5504f41ac83 https://www.fotosik....94917ec6d50a27f
Posted 8 July 2017 - 09:33
Posted 8 July 2017 - 09:54
I repeat the question , may have fled
Zgemma h3
- I can not find the setting for a recording location
- After changing secondinfobar to disabled after restarting the enigma setting returns to endless
Thanks a lot
Posted 8 July 2017 - 10:07
Ah, the default skin has change some time ago. Afaik the old PLi4 skin is still available. Just go to settings and change the skin.
Yes, only the default skin in OpenPLi 6.0 RC is prettier than the default in OpenPLi 4.0. It is more expressive and has nicer colors 
Can programmers be able to shift a bit from the edge of the bar? It will be more aesthetic, because the skin is perfect. Either where and in what file can be changed, it is myself, then I will try to do it alone. The second question why HbbTV is not working? Regards
Posted 8 July 2017 - 10:22
Can programmers be able to shift a bit from the edge of the bar? It will be more aesthetic, because the skin is perfect.
It is perfect now... I'm afraid you need to configure your TV properly.... your description indicates you watched to slightly zoomed in HD for a long time.... Look for tons of overscan topics on our forum!
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 8 July 2017 - 10:32
Before I take the plunge and install v6, can I ask if there is any visible benefit of moving from v4 to v6 on my vu ultimo 4k?
Posted 8 July 2017 - 10:35
The TV is configured correctly, as shown in the previous pictures. Do not fall for this ideal in self-raising, because you can always change something for the better.
Posted 8 July 2017 - 10:39
Before I take the plunge and install v6, can I ask if there is any visible benefit of moving from v4 to v6 on my vu ultimo 4k?
See the release notes in the Wiki...
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 8 July 2017 - 10:40
The TV is configured correctly, as shown in the previous pictures. Do not fall for this ideal in self-raising, because you can always change something for the better.
Apparently most of us don't see it as "better" to have the volume bar in the center of the screen.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Posted 8 July 2017 - 10:52
Not in the middle of the screen, just not touching the edge. Just move away from the edge of 5mm.
Posted 8 July 2017 - 11:46
Perhaps the wiki needs a section on skin design, to explain how you can make these modifications yourself.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 7 guests, 0 anonymous users
This topic is locked
