This topic is locked
I prefer to put discussed defaults in the wizard... and force just these configs for 6.0... e.g. also alternative numbering included...
OpenPLi 6.0 » Release candidate
Started by kojoot, 01 Jul 2017 05:51
820 replies to this topic
Re: OpenPLi 6.0 » Release candidate #481
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 29 July 2017 - 15:13
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPLi 6.0 » Release candidate #482
-
- PLi® Contributor
- 6,165 posts
+261
Excellent
Posted 29 July 2017 - 16:44
Indeed "alternative" numbering is also a recurrent "problem". 
And at restore of previous settings with autobackup, the HDMI-CEC is not set to back to ON.
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Re: OpenPLi 6.0 » Release candidate #483
-
- Member
- 3 posts
0
Neutral
Posted 29 July 2017 - 20:06
Bug report: OpenPLI 6.0
Automount after reboot of most FAT/FAT32 formatted 1GB USB flash drives does not work reliably.
All three 1GB USB flash drives I tested (for settings backup purposes), had been recognized at runtime immediately, after reboot the stick is gone.
Unpluging/repluging the USB flash drive at runtime solves the problem temporally.
USB flash drives with size of 2GB or greater survive a restart.
I tested 3 pc. 1GB USB flash drives, 1 pc. remounts at reboot (the oldest one) , don't ask me why.
Re: OpenPLi 6.0 » Release candidate #484
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 29 July 2017 - 21:27
I think it is not a bad idea to add the menu level setting to the startup wizard.
For alternative numbering this is a different case. We can revert it, I totally do not care
For alternative numbering this is a different case. We can revert it, I totally do not care
Edited by littlesat, 29 July 2017 - 21:34.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPLi 6.0 » Release candidate #485
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 30 July 2017 - 09:39
I think at least to stop all discussion Harro or Erik 'revert' the change in defaults patch on RC-6.0..
https://github.com/O...606df79f6eef93f (made by me, driven by redneck eyeball)
Actually 4 defaults were changed. About two of them we heared nothing so I suggest we only should revert the alternative numbering and the default menu setting... So everyone who does restore settings get all their settings of concern back.
And then about the menu level setting we could consider to add a screen to the wizard where you can set the menu level and there we could put the default selection by default on simple (this for 6.1).
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPLi 6.0 » Release candidate #486
-
- Forum Moderator
PLi® Core member - 14,888 posts
+485
Excellent
Posted 30 July 2017 - 12:25
For alternative numbering this is a different case. We can revert it, I totally do not care
Well I really hated this option, so I reverted a little part of that commit.
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Re: OpenPLi 6.0 » Release candidate #487
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 30 July 2017 - 12:35
When I could revert it in rc6.0 I already did it a few weeks ago... Then this discussion was already over for a few weeks... 
Sorry I do currently not have the rights to change things in RC6.0...
https://github.com/O...56631dff899465e
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPLi 6.0 » Release candidate #488
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 30 July 2017 - 15:21
I still don't agree, but who am I...
If we revert it, I would like that to be a temporary measure, and get an agreement the current config system needs an overhaul, to address the root cause of this issue. Otherwise, we're stuck until the end of times with this stupid implementation.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #489
-
- Senior Member
- 157 posts
+10
Neutral
Posted 30 July 2017 - 16:09
Hello, when will the HbbTV plugin start working on VU + Solo2?
In addition to the information - streaming clients do not have any information when sharing on an internal network. Empty page Regrads
Re: OpenPLi 6.0 » Release candidate #490
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 30 July 2017 - 19:07
When VU+ offers an implementation that works, of when someone comes up with an open source implementation.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #491
-
- Senior Member
- 157 posts
+10
Neutral
Posted 31 July 2017 - 03:33
Why does it work without problems on OpenPLi 4.0? regrads
Re: OpenPLi 6.0 » Release candidate #492
-
- Senior Member
- 415 posts
+3
Neutral
Posted 31 July 2017 - 06:58
Hello all
I have noticed a problem with the mediaplayer : when i begin a movie, the image arrive during 4 or 5 seconds, and then there is a black screen during 2 or 3 seconds, and the movies goes normally.
I hope, this will be corrceted in the next version.
Great job !
Edited by zebulon7, 31 July 2017 - 06:58.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Re: OpenPLi 6.0 » Release candidate #493
-
- PLi® Core member
- 57,062 posts
+698
Excellent
Posted 31 July 2017 - 09:17
Could be driver issues... nothing we could solve...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: OpenPLi 6.0 » Release candidate #494
-
- Senior Member
- 1,634 posts
+14
Neutral
Posted 31 July 2017 - 09:52
What kind of file is it (I would suspect not a normal recording). If it is another file (like MP4) what kind and give the codec details (you can find it out with the help of https://mediaarea.ne...iaInfo/Download )
Ps. Wouldn't it be handy to have this also in OpenPLi so you can "investigate" the codec etc from a file in the GUI? The code is available at https://sourceforge....ects/mediainfo/
Edited by Dream1975, 31 July 2017 - 09:55.
Mutant HD2400, OpenPLi nightly, 2x DVB-C & 2x DVB-S
Mutant HD51, OpenPLi nightly, 1x DVB-C & 1x DVB-S
Wavefrontier T55 (Astra 1,2,3 en HB)
Smartcards Ziggo (Irdeto) and CDS (Seca) on Oscam
Re: OpenPLi 6.0 » Release candidate #495
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 31 July 2017 - 12:27
Could also be a gstreamer issue. For 6.1 there are some gstreamer fixes planned (currently v1.12.2) which will make streaming more stable.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #496
-
- Senior Member
- 415 posts
+3
Neutral
Posted 31 July 2017 - 13:16
It was some AVI files
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Re: OpenPLi 6.0 » Release candidate #497
-
- Senior Member
- 94 posts
0
Neutral
Posted 31 July 2017 - 13:52
Not a viable solution if 6.1 is too far away from being released.Could also be a gstreamer issue. For 6.1 there are some gstreamer fixes planned (currently v1.12.2) which will make streaming more stable.
Στάλθηκε από το Moto G 2014 μου χρησιμοποιώντας Tapatalk
Re: OpenPLi 6.0 » Release candidate #498
-
- PLi® Core member
- 70,220 posts
+1,798
Excellent
Posted 31 July 2017 - 14:44
You'll have to live with what we can archieve. You can always compile your own develop image if you can't wait.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: OpenPLi 6.0 » Release candidate #499
-
- Senior Member
- 58 posts
+2
Neutral
Posted 31 July 2017 - 18:19
Hello
Will the recording location settings be available in rc 6.0 ?
Re: OpenPLi 6.0 » Release candidate #500
-
- PLi® Core member
- 7,185 posts
+323
Excellent
Posted 31 July 2017 - 18:28
Xtrend ET-9200, ET-8000, ET-10000, OpenPliPC on Ubuntu 12.04
21 user(s) are reading this topic
0 members, 21 guests, 0 anonymous users
