Long blue is softcam setup by default...
Good to know.
Blue then OK (default) is far quicker.
Long Blue free for something more important
Posted 10 August 2017 - 12:42
Long blue is softcam setup by default...
Good to know.
Blue then OK (default) is far quicker.
Long Blue free for something more important
Xtrend et8000 7.1-Release
2 x 8/1 DiSEqC 30w 13e 19e 23e 28e
Astrometa USB Tuner Working DVB-T2 now on Kernel 4.10+
WD10EARX 1TB
Sandisk 32GB USB for AFB, EPG, Picons & Timeshift
ZGemma Star S 7.0-Release
4/1 DiSEqC 30w 13e 19e 28e
Sandisk 8GB USB for AFB, EPG, Picons & Timeshift
LG 49UH610V UHD-HDR
UHF/Cable/Sat
E-Channelizer
Posted 11 August 2017 - 12:38
Hi,
I just update my ET-9000 now, it updates 8 packages and reboot.
Now OpenPLi is running fine but no menu are displayed on screen.
But it react so I can zap and looking at the front VFD I can see that it open up menu, etc... but only TV image is displayed.
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 August 2017 - 12:43
Has been a reported issue on ET's with an RC flashed more than a few days ago, we think due to an incomplete rootfs in the image.
You will have to flash again to get this fixed with the latest build to have this fixed.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 11 August 2017 - 14:41
Hi,
Another reboot of the ET-9000 and now everything is back to normal... strange...
Pr2
NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.
Wanna help with OpenPLi Translation? Please read our Wiki Information for translators
Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)
AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
Posted 11 August 2017 - 15:08
Indeed. No clue what is causing it.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 12 August 2017 - 15:54
Hi all and thanks for the new openpli (candidate) release.
I installed OpenPLI 6 on my vu+ zero box but I'm unable to send (write) channels' bouquets to the receiver using dreamset nor E-channelizer although both software report that the configuration is correct and that they are able to connect to the receiver. However I'm able to read the channels list from the receiver.
Posted 12 August 2017 - 16:05
Must be a local issue, the way that works hasn't changed in over 10 years? I use DBE but all use the same principle, they use FTP to send the files across.
Any particular error message? Can you connect to the box with FTP from your PC, and copy files off and on?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 13 August 2017 - 21:24
When will RC 7 be released? :-)
Never.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 August 2017 - 16:17
7 Stable? Also never.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 August 2017 - 16:41
Edited by athoik, 14 August 2017 - 16:41.
Posted 14 August 2017 - 16:44
If they would have asked about 7.0, my answer would have been different.
I see these posts as a sneer, complaining that according to them things aren't going fast enough. So I ignore them, if people want us to move faster, join us as a volunteer instead of standing on the sideline and moan.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 14 August 2017 - 17:58
Argggh, HELP.
Is there some way i can modify the keymap.xml for "Neutrino" like. PLEASE
I like the good old way to get the channel list by pressing "OK" . (<key id="KEY_OK" mapto="openServiceList" flags="mr" />)
But in OpenPli 6, is it not possible for me to figure that to change in keymax.xml to get this feature working.
Help please ??
Posted 15 August 2017 - 12:40
If they would have asked about 7.0, my answer would have been different.
I see these posts as a sneer, complaining that according to them things aren't going fast enough. So I ignore them, if people want us to move faster, join us as a volunteer instead of standing on the sideline and moan.
It wasn't meant as a sneer at all, just an (futile)attempt of being funny, hence the smiley, I'm still on openPLI 4 and utterly content with it.
Posted 15 August 2017 - 12:42
Missed that completely.
I've seen so many of these remarks that are not meant to be funny, that my fuse becomes very short when I see one.
Appologies if I offended you.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
0 members, 26 guests, 0 anonymous users