26 replies to this topic

[littlesat]

I reread this thread.... It sees you did upgrade.... When was the last time you did flash?..... Please reflash...

[ColinB]

I reread this thread.... It sees you did upgrade.... When was the last time you did flash?..... Please reflash...

 

 

 

*** THIS BACKUP IS CREATED WITH THE PLUGIN BACKUPSUITE ***
***** This plugin is brought to you by Pedro_Newbie ******

Plugin version     = git158+00f08cd
Back-up media      = /media/usb
Filesystem                Size      Used Available Use% Mounted on
/dev/sdb1                29.7G      4.3G     25.4G  14% /media/usb

Back-up = 2017.08.14_17:30
Version = openpli 6.0-rc
Flashed = 2017.08.03_13:36
Updated = 2017.08.14_13:32
Drivers = et-dvb-modules-et8000 - 4.0.1+20160420-r0.0
Enigma2 = 2017-07-31-rc-6.0
 

 

I will flash to latest now

[ColinB]

Today I chose to do a clean install (RC6 14--8-17) and manualy add my settings, plugins etc. All good so far.

It didn't pick up the static ip set in the router (DHCP server) and chose a random free one. Couldn't find how to change this during setup.Easily sorted later manualy.

 

I liked the options to install plugins during install

 

From Win8.1-64 I could connect via telnet and ftp, but not browse via the "File Explorer" even though I had NO problems connecting to the "sh1" on the same network.

 

Eventualy after much rebooting of both PC & STB it was good.

 

So the final part to do was init 4 copy timers.xml & autotimers.xml and init 3.

 

Result: STB stuck on RC6 splash screen. LED display showing last channel

 

openpli 6.0-rc et8000

et8000 login: root
Last login: Tue Aug 15 14:32:28 IST 2017 on pts/0
root@et8000:~# ps
  PID USER       VSZ STAT COMMAND
    1 root      1836 S    init [3]
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    4 root         0 SW   [kworker/0:0]
    5 root         0 SW<  [kworker/0:0H]
    6 root         0 SW   [kworker/u4:0]
    7 root         0 SW   [rcu_sched]
    8 root         0 SW   [rcu_bh]
    9 root         0 SW   [migration/0]
   10 root         0 SW   [migration/1]
   11 root         0 RW   [ksoftirqd/1]
   12 root         0 SW   [kworker/1:0]
   13 root         0 SW<  [kworker/1:0H]
   14 root         0 SW<  [khelper]
   15 root         0 SW   [kdevtmpfs]
   16 root         0 SW<  [writeback]
   17 root         0 SW<  [crypto]
   18 root         0 SW<  [bioset]
   19 root         0 SW   [kworker/0:1]
   20 root         0 SW<  [kblockd]
   21 root         0 SW<  [ata_sff]
   22 root         0 SW<  [cfg80211]
   23 root         0 SW   [kworker/1:1]
   24 root         0 SW<  [rpciod]
   25 root         0 SW   [kswapd0]
   26 root         0 SW   [fsnotify_mark]
   27 root         0 SW<  [nfsiod]
   28 root         0 SW<  [cifsiod]
   42 root         0 SW<  [kworker/u5:0]
   43 root         0 SW<  [kloopd]
   44 root         0 SW   [scsi_eh_0]
   45 root         0 SW<  [scsi_tmf_0]
   46 root         0 SW   [scsi_eh_1]
   47 root         0 SW<  [scsi_tmf_1]
   48 root         0 SW   [scsi_eh_2]
   49 root         0 SW<  [scsi_tmf_2]
   50 root         0 SW   [kworker/u4:1]
   51 root         0 SW   [kworker/u4:2]
   52 root         0 SW   [kworker/u4:3]
   53 root         0 SW   [kworker/u4:4]
   54 root         0 RW   [kworker/1:2]
   55 root         0 SW   [kworker/1:3]
   56 root         0 SW   [irq/35-mmc0]
   63 root         0 SW<  [deferwq]
   64 root         0 SW   [scsi_eh_3]
   65 root         0 SW<  [scsi_tmf_3]
   66 root         0 SW   [usb-storage]
   67 root         0 SW   [ubi_bgt0d]
   68 root         0 SW   [ubifs_bgt0_0]
   98 root         0 SW<  [kworker/1:1H]
  112 root         0 SW<  [kworker/0:1H]
  113 root         0 SW   [jbd2/sda1-8]
  114 root         0 SW<  [ext4-rsv-conver]
  177 root         0 DW   [pppppppp]
  178 root         0 SW   [ppppppppppppppp]
  179 root         0 SW   [ppppppppppppppp]
  180 root         0 SW   [ppppppppppppppp]
  181 root         0 SW   [pppppppppppp]
  182 root         0 SW   [ppppppppppppp]
  183 root         0 SW   [ppppppppppppppp]
  200 root         0 SW<  [pp_work]
  201 root         0 SW<  [rp_work]
  253 root         0 SW   [jbd2/sdb1-8]
  254 root         0 SW<  [ext4-rsv-conver]
  269 root         0 SW<  [ci_work]
  274 root         0 SW   [sci0]
  276 root         0 SW   [sci1]
  434 messageb  2964 S    /usr/bin/dbus-daemon --system
  442 root         0 SW<  [ipv6_addrconf]
  443 root      2520 S    /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22
  447 rpc       2360 S    /usr/sbin/rpcbind
  452 rpcuser   2968 S    /usr/sbin/rpc.statd
  462 root      3148 S    /usr/sbin/inetd
  465 root     31772 S    /usr/sbin/smbd
  467 root     29908 S    {smbd-notifyd} /usr/sbin/smbd
  468 root     29908 S    {cleanupd} /usr/sbin/smbd
  470 root     20592 S    /usr/sbin/nmbd
  474 root      2768 S    /sbin/syslogd -n -O /var/log/messages
  477 root      2768 S    /sbin/klogd -n
  484 avahi     3500 S    avahi-daemon: running [et8000.local]
  485 avahi     3500 S    avahi-daemon: chroot helper
  488 root      5864 S    /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pid
  490 root     13780 S    /usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pid
  510 root         0 SW   [cifsd]
  532 root         0 SW   [cifsd]
  558 root         0 SW   [kworker/0:2]
  571 root      2980 S    {enigma2.sh} /bin/sh /usr/bin/enigma2.sh
  575 root     24820 S    /usr/bin/enigma2
  578 root      3020 S    telnetd
  579 root      3704 S    /bin/login
  580 root      4924 S    -sh
  583 root      3016 R    ps
root@et8000:~# shutdown -r now

Broadcast message from root@et8000 (pts/0) (Tue Aug 15 14:35:44 2017):

The system is going down for reboot NOW!
root@et8000:~# dmesg
sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found
sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found
usb 2-1: new high-speed USB device number 2 using ehci-brcm
mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS1: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
nand: Samsung NAND 512MiB 3,3V 8-bit
nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4

Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_read_bbt: bad block at 0x000006500000
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x000020000000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x000020000000 : "rootfs"
EBI CS0: setting up SPI flash
brcm_setup_spi_flash: can't locate SPI master
brcm_setup_cs: can't register SPI flash (error -19)
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 25
ubi0: attaching mtd2
usb-storage 2-1:1.0: USB Mass Storage device detected
ata2: SATA link down (SStatus 0 SControl 300)
scsi host3: usb-storage 2-1:1.0
ubi0: attached by fastmap
ubi0: fastmap pool size: 200
ubi0: fastmap WL pool size: 25
ubi0: attached mtd2 (name "rootfs", size 506 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 4043, bad PEBs: 5, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 33/18, WL threshold: 4096, image sequence number: 1476287519
ubi0: available PEBs: 0, total reserved PEBs: 4043, PEBs reserved for bad PEB handling: 75
ubi0: background thread "ubi_bgt0d" started, PID 67
ALSA device list:
  No soundcards found.
Warning: unable to open an initial console.
UBIFS: background thread "ubifs_bgt0_0" started, PID 68
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 501682176 bytes (478 MiB, 3951 LEBs), journal size 9023488 bytes (8 MiB, 72 LEB
s)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID A7FBBA6C-72DF-4FB5-835D-0DD0CA919106, small
LPT model
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 264K (808ee000 - 80930000)
usb 8-1: new full-speed USB device number 2 using ohci-brcm
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: (null)
scsi 3:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new interface driver tpm
sd 3:0:0:0: [sdb] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
Console: switching to colour frame buffer device 160x45
input: dreambox remote control (native) as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
input: front panel as /devices/virtual/input/input2
Console: switching to colour dummy device 80x25
__clk_enable: network [1]
bcm7429_pm_network_enable 00
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
NET: Registered protocol family 10
INFO: rcu_sched self-detected stall on CPU { 1}  (t=21001 jiffies g=4280 c=4279 q=179)
Task dump for CPU 1:
kworker/1:2     R running      0    54      2 0x00100004
Workqueue: events __32a17e [dvb]
Stack : 808a0000 808a6acc 808a6e00 80071208 00000001 80070d98 00000000 00000000
          80861438 cf5296b4 00000000 8071ce84 00000000 00000000 80934f80 0000001d
          cf5296b4 00000001 cfe12388 80041048 808a6e00 10000b00 00000065 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 6e657665 00007374
          00000000 00000000 00000000 00000000 cfc11000 8181d400 e09ac578 808a0000
          ...
Call Trace:
[<8000ebac>] show_stack+0x64/0x7c
[<8007aedc>] rcu_dump_cpu_stacks+0xac/0x110
[<8007f258>] rcu_check_callbacks+0x590/0x91c
[<80082068>] update_process_times+0x3c/0x78
[<80093ab0>] tick_sched_timer+0x70/0x2c8
[<80083180>] __run_hrtimer.isra.5+0x68/0x110
[<80083450>] hrtimer_interrupt+0x174/0x450
[<80011a54>] c0_compare_interrupt+0x7c/0xc0
[<80072a88>] handle_irq_event_percpu+0x78/0x1cc
[<80077184>] handle_percpu_irq+0x8c/0xbc
[<80071fe8>] generic_handle_irq+0x34/0x4c
[<8000a42c>] do_IRQ+0x18/0x2c
[<80003bb8>] plat_irq_dispatch+0x108/0x160
[<800081c8>] ret_from_irq+0x0/0x4
[<e0ade948>] __496406+0x390/0x2614 [dvb]
[<e0adc3f8>] __587324+0x84/0x128 [dvb]
[<e0adc554>] __0d4ceb+0xb8/0x108 [dvb]
[<e0a5327c>] __bf5ea7+0xe0/0x1b8 [dvb]
[<e0a53d3c>] __f9d87e+0x30/0x50 [dvb]
[<e09aad14>] __897317+0x30/0x78 [dvb]
[<e09ab86c>] __d58096.part.5+0x60c/0x63c [dvb]
[<e09ac5dc>] __32a17e+0x64/0xd8 [dvb]
[<8003e838>] process_one_work+0x248/0x4d0
[<8003f0c0>] worker_thread+0x17c/0x654
[<80044648>] kthread+0x10c/0x124
[<80008228>] ret_from_kernel_thread+0x14/0x1c

INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=21002 jiffies, g=4280, c=
4279, q=179)
Task dump for CPU 1:
kworker/1:2     R running      0    54      2 0x00100004
Workqueue: events __32a17e [dvb]
Stack : 81817c80 cef47ef0 cf511780 8181d400 00000000 8003e838 cf528000 81817e80
          81817c94 00000008 808a0100 808a0000 808e0000 81817c80 cf511798 81817c94
          00000008 808a0100 808a0000 808e0000 81817e80 8003f0c0 808a0100 8005ec20
          cf528000 cfc6be10 808e0000 8003ef44 807eeea0 808a7e60 cf511700 cfc6be10
          cf511780 8003ef44 80930000 808a7e60 808a0100 00010000 808a5ae0 80044648
          ...
Call Trace:
[<80720b5c>] __schedule+0x398/0x928

INFO: rcu_sched self-detected stall on CPU { 1}  (t=84006 jiffies g=4280 c=4279 q=1361)
Task dump for CPU 1:
kworker/1:2     R running      0    54      2 0x00100004
Workqueue: events __32a17e [dvb]
Stack : 808a0000 808a6acc 808a6e00 80071208 00000001 80070d98 00000000 00000000
          80861438 cf5296b4 00000000 8071ce84 00000000 00000000 80934f80 0000001d
          cf5296b4 00000001 cfe12388 80041048 808a6e00 10000b00 00000095 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 6e657665 00007374
          00000000 00000000 00000000 00000000 cfc11000 8181d400 e09ac578 808a0000
          ...
Call Trace:
[<8000ebac>] show_stack+0x64/0x7c
[<8007aedc>] rcu_dump_cpu_stacks+0xac/0x110
[<8007f258>] rcu_check_callbacks+0x590/0x91c
[<80082068>] update_process_times+0x3c/0x78
[<80093ab0>] tick_sched_timer+0x70/0x2c8
[<80083180>] __run_hrtimer.isra.5+0x68/0x110
[<80083450>] hrtimer_interrupt+0x174/0x450
[<80011a54>] c0_compare_interrupt+0x7c/0xc0
[<80072a88>] handle_irq_event_percpu+0x78/0x1cc
[<80077184>] handle_percpu_irq+0x8c/0xbc
[<80071fe8>] generic_handle_irq+0x34/0x4c
[<8000a42c>] do_IRQ+0x18/0x2c
[<80003bb8>] plat_irq_dispatch+0x108/0x160
[<800081c8>] ret_from_irq+0x0/0x4
[<e0ade624>] __496406+0x6c/0x2614 [dvb]
[<e0adc3f8>] __587324+0x84/0x128 [dvb]
[<e0adc554>] __0d4ceb+0xb8/0x108 [dvb]
[<e0a5327c>] __bf5ea7+0xe0/0x1b8 [dvb]
[<e0a53d3c>] __f9d87e+0x30/0x50 [dvb]
[<e09aad14>] __897317+0x30/0x78 [dvb]
[<e09ab86c>] __d58096.part.5+0x60c/0x63c [dvb]
[<e09ac5dc>] __32a17e+0x64/0xd8 [dvb]
[<8003e838>] process_one_work+0x248/0x4d0
[<8003f0c0>] worker_thread+0x17c/0x654
[<80044648>] kthread+0x10c/0x124
[<80008228>] ret_from_kernel_thread+0x14/0x1c

INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=84007 jiffies, g=4280, c=
4279, q=1361)
Task dump for CPU 1:
kworker/1:2     R running      0    54      2 0x00100004
Workqueue: events __32a17e [dvb]
Stack : 81817c80 cef47ef0 cf511780 8181d400 00000000 8003e838 cf528000 81817e80
          81817c94 00000008 808a0100 808a0000 808e0000 81817c80 cf511798 81817c94
          00000008 808a0100 808a0000 808e0000 81817e80 8003f0c0 808a0100 8005ec20
          cf528000 cfc6be10 808e0000 8003ef44 807eeea0 808a7e60 cf511700 cfc6be10
          cf511780 8003ef44 80930000 808a7e60 808a0100 00010000 808a5ae0 80044648
          ...
Call Trace:
[<80720b5c>] __schedule+0x398/0x928

777777777777777777777777777777777777777777777777777777777777777777777777777777
INFO: rcu_sched self-detected stall on CPU { 1}  (t=147011 jiffies g=4280 c=4279 q=1990)
Task dump for CPU 1:
kworker/1:2     R running      0    54      2 0x00100004
Workqueue: events __32a17e [dvb]
Stack : 808a0000 808a6acc 808a6e00 80071208 00000001 80070d98 00000000 00000000
          80861438 cf5296b4 00000000 8071ce84 00000000 00000000 80934f80 0000001d
          cf5296b4 00000001 cfe12388 80041048 808a6e00 10000b00 000000b4 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 6e657665 00007374
          00000000 00000000 00000000 00000000 cfc11000 8181d400 e09ac578 808a0000
          ...
Call Trace:
[<8000ebac>] show_stack+0x64/0x7c
[<8007aedc>] rcu_dump_cpu_stacks+0xac/0x110
[<8007f258>] rcu_check_callbacks+0x590/0x91c
[<80082068>] update_process_times+0x3c/0x78
[<80093ab0>] tick_sched_timer+0x70/0x2c8
[<80083180>] __run_hrtimer.isra.5+0x68/0x110
[<80083450>] hrtimer_interrupt+0x174/0x450
[<80011a54>] c0_compare_interrupt+0x7c/0xc0
[<80072a88>] handle_irq_event_percpu+0x78/0x1cc
[<80077184>] handle_percpu_irq+0x8c/0xbc
[<80071fe8>] generic_handle_irq+0x34/0x4c
[<8000a42c>] do_IRQ+0x18/0x2c
[<80003bb8>] plat_irq_dispatch+0x108/0x160
[<800081c8>] ret_from_irq+0x0/0x4
[<e0ade8f8>] __496406+0x340/0x2614 [dvb]
[<e0adc3f8>] __587324+0x84/0x128 [dvb]
[<e0adc554>] __0d4ceb+0xb8/0x108 [dvb]
[<e0a5327c>] __bf5ea7+0xe0/0x1b8 [dvb]
[<e0a53d3c>] __f9d87e+0x30/0x50 [dvb]
[<e09aad14>] __897317+0x30/0x78 [dvb]
[<e09ab86c>] __d58096.part.5+0x60c/0x63c [dvb]
[<e09ac5dc>] __32a17e+0x64/0xd8 [dvb]
[<8003e838>] process_one_work+0x248/0x4d0
[<8003f0c0>] worker_thread+0x17c/0x654
[<80044648>] kthread+0x10c/0x124
[<80008228>] ret_from_kernel_thread+0x14/0x1c

INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=147012 jiffies, g=4280, c
=4279, q=1990)
Task dump for CPU 1:
kworker/1:2     R running      0    54      2 0x00100004
Workqueue: events __32a17e [dvb]
Stack : 81817c80 cef47ef0 cf511780 8181d400 00000000 8003e838 cf528000 81817e80
          81817c94 00000008 808a0100 808a0000 808e0000 81817c80 cf511798 81817c94
          00000008 808a0100 808a0000 808e0000 81817e80 8003f0c0 808a0100 8005ec20
          cf528000 cfc6be10 808e0000 8003ef44 807eeea0 808a7e60 cf511700 cfc6be10
          cf511780 8003ef44 80930000 808a7e60 808a0100 00010000 808a5ae0 80044648
          ...
Call Trace:
[<80720b5c>] __schedule+0x398/0x928

root@et8000:~#

 

After rebbot from telnet I got the giant TEXT and no cahannel change, though current channel is playing fine Picture & Audio.

[Erik Slagter]

Oopses in the dmesg can never be the result of "normal" conditions. You can start enigma as many times as you want, you can fork as many processes as you want, you'll never get an OOPS in the syslog.

 

OOPS in the syslog means:

 

- hardware issue

- driver bug

- linux kernel bug

 

There are no real other possibilities.

[ColinB]

Thanks Eric for taking the time to have a look. I was thinking as much, and was the reason I didn't inlude it in the main RC6 thread. Its been fine since last post.

 

Can someone tell me if this is normal, BogoMIPS ?

 

openpli 6.0-rc et8000

et8000 login: root
root@et8000:~# cat /proc/cpuinfo
system type             : BCM7429B0 STB platform
machine                 : Unknown
processor               : 0
cpu model               : Broadcom BMIPS5000 V1.1  FPU V0.1
BogoMIPS                : 864.25
cpu MHz                 : 1305.088
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 64
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

processor               : 1
cpu model               : Broadcom BMIPS5000 V1.1  FPU V0.1
BogoMIPS                : 655.36
cpu MHz                 : 1305.088
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 64
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

root@et8000:~#

[Erik Slagter]

Yes, both CPU's can be differently loaded at BogoMips calculation time, so their value may differ, we see that more often. It does not have any negative impact.

[ColinB]

Thak You