Jump to content


Photo

After having upgraded DM8000 OpenPLi4 USB won't work anymore.

Started by grommit63, 15 Aug 2017 16:26

  • Please log in to reply
24 replies to this topic

#1 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 15 August 2017 - 16:26

hi guys after doing online upgrades OpenPLi4 on dm8000 my usb and cf stopped reading usb stick or compact flash card as anyone got

any idea how to fix the problem ?

 

cheers


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #2 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 15 August 2017 - 16:30

How long ago was it that you updated? There haven't been any changes for the dm8000 is dogs years...


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #3 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 15 August 2017 - 16:42

hi WanWizard was on [ OpenPLi 4 (2017-06-30)3.2 / 3.2-20140604a-r7.0.1] i was trying to get a new dvdrom drive to work after the updates dvd is working now but usb sticks and cf not reading


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #4 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 15 August 2017 - 16:57

Drive connected or configured incorrectly? If you do a 'dmesg' after startup you should be able to see if is has detected your devices or not.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #5 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 15 August 2017 - 17:39

hi WanWizard

 

i did the dmesg and the result wasusb 1-1.1: new high-speed USB device number 4 using ehci-brcm
scsi4 : usb-storage 1-1.1:1.0
scsi 4:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdf] 1010176 512-byte logical blocks: (517 MB/493 MiB)
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming dr
ive cache: write through
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
 sdf:

 

i think is a configured problem. After i did the updates openPLi4 stopped reading the hardrive as well but i fixed that by putting the line [/dev/sda1 /media/hdd auto defaults 0 0] in fstab


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #6 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 15 August 2017 - 20:55

How come that line wasn't in there in the first place? There is nothing in the image that would remove that.

 

Are you multibooting or something?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #7 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 15 August 2017 - 21:09

NO just on the one image was all working before, apart from the dvd drive then i did a software update dvd drive worked but lost h/drive usb and cf


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #8 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 15 August 2017 - 21:13

i found this post on how to fix the hardrive

https://forums.openp...oftware-update/


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #9 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 16 August 2017 - 13:01

That is not a fix, only probably a workaround.

 

The main question is why your devices aren't mounted, if they are detected. Can you issue these three commands

ls -l /media
mount
grep "" -r /proc/scsi

after a cold boot and without any fstab or other fixes, and post the results here?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #10 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 16 August 2017 - 18:25

Good evening WanWizard i send the commands with telnet this is what i got back[H[Jroot@dm8000:~# [6n
ls -l /media


drwxrwxrwx    7 root     root          4096 Aug 16 18:01 [1;34mhdd[0m
root@dm8000:~# [6n
mount


rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=74540k,nr_inodes=18635,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
tmpfs on /var/volatile type tmpfs (rw,relatime)
/dev/sda1 on /media/hdd type ext4 (rw,relatime,barrier=1,data=ordered)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
root@dm8000:~# [6n
grep "" -r /proc/scsi


/proc/scsi/usb-storage/3:   Host scsi3: usb-storage
/proc/scsi/usb-storage/3:       Vendor: Sunplus Technology Co.,Ltd.
/proc/scsi/usb-storage/3:      Product: USB to Serial-ATA bridge
/proc/scsi/usb-storage/3:Serial Number: FFFFFFFE0D435636529241
/proc/scsi/usb-storage/3:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/3:    Transport: Bulk
/proc/scsi/usb-storage/3:       Quirks:
/proc/scsi/usb-storage/2:   Host scsi2: usb-storage
/proc/scsi/usb-storage/2:       Vendor: Generic
/proc/scsi/usb-storage/2:      Product: Mass Storage Device
/proc/scsi/usb-storage/2:Serial Number: 058F312D81B
/proc/scsi/usb-storage/2:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/2:    Transport: Bulk
/proc/scsi/usb-storage/2:       Quirks:
/proc/scsi/device_info:'Aashima' 'IMAGERY 2400SP' 0x1
/proc/scsi/device_info:'CHINON' 'CD-ROM CDS-431' 0x1
/proc/scsi/device_info:'CHINON' 'CD-ROM CDS-535' 0x1
/proc/scsi/device_info:'DENON' 'DRD-25X' 0x1
/proc/scsi/device_info:'HITACHI' 'DK312C' 0x1
/proc/scsi/device_info:'HITACHI' 'DK314C' 0x1
/proc/scsi/device_info:'IBM' '2104-DU3' 0x1
/proc/scsi/device_info:'IBM' '2104-TU3' 0x1
/proc/scsi/device_info:'IMS' 'CDD521/10' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-3280' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-4380S' 0x1
/proc/scsi/device_info:'MAXTOR' 'MXT-1240S' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-4170S' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-8760S' 0x1
/proc/scsi/device_info:'MEDIAVIS' 'RENO CD-ROMX2A' 0x1
/proc/scsi/device_info:'MICROTEK' 'ScanMakerIII' 0x1
/proc/scsi/device_info:'NEC' 'CD-ROM DRIVE:841' 0x1
/proc/scsi/device_info:'PHILIPS' 'PCA80SC' 0x1
/proc/scsi/device_info:'RODIME' 'RO3000S' 0x1
/proc/scsi/device_info:'SUN' 'SENA' 0x1
/proc/scsi/device_info:'SANYO' 'CRD-250S' 0x1
/proc/scsi/device_info:'SEAGATE' 'ST157N' 0x1
/proc/scsi/device_info:'SEAGATE' 'ST296' 0x1
/proc/scsi/device_info:'SEAGATE' 'ST1581' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-541' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-55S' 0x1
/proc/scsi/device_inf
o:'SONY' 'CD-ROM CDU-561' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-8012' 0x1
/proc/scsi/device_info:'SONY' 'SDT-5000' 0x200000
/proc/scsi/device_info:'TANDBERG' 'TDC 3600' 0x1
/proc/scsi/device_info:'TEAC' 'CD-R55S' 0x1
/proc/scsi/device_info:'TEAC' 'CD-ROM' 0x1
/proc/scsi/device_info:'TEAC' 'MT-2ST/45S2-27' 0x1
/proc/scsi/device_info:'HP' 'C1750A' 0x1
/proc/scsi/device_info:'HP' 'C1790A' 0x1
/proc/scsi/device_info:'HP' 'C2500A' 0x1
/proc/scsi/device_info:'MEDIAVIS' 'CDR-H93MV' 0x1
/proc/scsi/device_info:'MICROTEK' 'ScanMaker II' 0x1
/proc/scsi/device_info:'MITSUMI' 'CD-R CR-2201CS' 0x1
/proc/scsi/device_info:'NEC' 'D3856' 0x1
/proc/scsi/device_info:'QUANTUM' 'LPS525S' 0x1
/proc/scsi/device_info:'QUANTUM' 'PD1225S' 0x1
/proc/scsi/device_info:'QUANTUM' 'FIREBALL ST4.3S' 0x1
/proc/scsi/device_info:'RELISYS' 'Scorpio' 0x1
/proc/scsi/device_info:'SANKYO' 'CP525' 0x1
/proc/scsi/device_info:'TEXEL' 'CD-ROM' 0x1
/proc/scsi/device_info:'transtec' 'T5008' 0x40000
/proc/scsi/device_info:'YAMAHA' 'CDR100' 0x1
/proc/scsi/device_info:'YAMAHA' 'CDR102' 0x1
/proc/scsi/device_info:'YAMAHA' 'CRW8424S' 0x1
/proc/scsi/device_info:'YAMAHA' 'CRW6416S' 0x1
/proc/scsi/device_info:'' 'Scanner' 0x1
/proc/scsi/device_info:'3PARdata' 'VV' 0x20000
/proc/scsi/device_info:'ADAPTEC' 'AACRAID' 0x2
/proc/scsi/device_info:'ADAPTEC' 'Adaptec 5400S' 0x2
/proc/scsi/device_info:'AFT PRO' '-IX CF' 0x2
/proc/scsi/device_info:'BELKIN' 'USB 2 HS-CF' 0x402
/proc/scsi/device_info:'BROWNIE' '1200U3P' 0x40000
/proc/scsi/device_info:'BROWNIE' '1600U3P' 0x40000
/proc/scsi/device_info:'CANON' 'IPUBJD' 0x40
/proc/scsi/device_info:'CBOX3' 'USB Storage-SMC' 0x402
/proc/scsi/device_info:'CMD' 'CRA-7280' 0x40
/proc/scsi/device_info:'CNSI' 'G7324' 0x40
/proc/scsi/device_info:'CNSi' 'G8324' 0x40
/proc/scsi/device_info:'COMPAQ' 'ARRAY CONTROLLER' 0x820240
/proc/scsi/device_info:'COMPAQ' 'LOGICAL VOLUME' 0x800002
/proc/scsi/device_info:'COMPAQ' 'CR3500' 0x2
/proc/scsi/device_info:'COMPAQ' 'MSA1000' 0x1040
/proc/scsi/device_
info:'COMPAQ' 'MSA1000 VOLUME' 0x1040
/proc/scsi/device_info:'COMPAQ' 'HSV110' 0x21000
/proc/scsi/device_info:'DDN' 'SAN DataDirector' 0x40
/proc/scsi/device_info:'DEC' 'HSG80' 0x21000
/proc/scsi/device_info:'DELL' 'PV660F' 0x40
/proc/scsi/device_info:'DELL' 'PV660F   PSEUDO' 0x40
/proc/scsi/device_info:'DELL' 'PSEUDO DEVICE .' 0x40
/proc/scsi/device_info:'DELL' 'PV530F' 0x40
/proc/scsi/device_info:'DELL' 'PERCRAID' 0x2
/proc/scsi/device_info:'DGC' 'RAID' 0x40
/proc/scsi/device_info:'DGC' 'DISK' 0x40
/proc/scsi/device_info:'EMC' 'Invista' 0x240
/proc/scsi/device_info:'EMC' 'SYMMETRIX' 0x242
/proc/scsi/device_info:'EMULEX' 'MD21/S2     ESDI' 0x10
/proc/scsi/device_info:'easyRAID' '16P' 0x40000
/proc/scsi/device_info:'easyRAID' 'X6P' 0x40000
/proc/scsi/device_info:'easyRAID' 'F8' 0x40000
/proc/scsi/device_info:'FSC' 'CentricStor' 0x240
/proc/scsi/device_info:'Generic' 'USB SD Reader' 0x402
/proc/scsi/device_info:'Generic' 'USB Storage-SMC' 0x402
/proc/scsi/device_info:'Generic' 'USB Storage-SMC' 0x402
/proc/scsi/device_info:'HITACHI' 'DF400' 0x20000
/proc/scsi/device_info:'HITACHI' 'DF500' 0x20000
/proc/scsi/device_info:'HITACHI' 'DISK-SUBSYSTEM' 0x20000
/proc/scsi/device_info:'HITACHI' 'OPEN-' 0x20000
/proc/scsi/device_info:'HITACHI' 'OP-C-' 0x240
/proc/scsi/device_info:'HITACHI' '3380-' 0x240
/proc/scsi/device_info:'HITACHI' '3390-' 0x240
/proc/scsi/device_info:'HITACHI' '6586-' 0x240
/proc/scsi/device_info:'HITACHI' '6588-' 0x240
/proc/scsi/device_info:'HP' 'A6189A' 0x240
/proc/scsi/device_info:'HP' 'OPEN-' 0x20000
/proc/scsi/device_info:'HP' 'NetRAID-4M' 0x2
/proc/scsi/device_info:'HP' 'HSV100' 0x21000
/proc/scsi/device_info:'HP' 'C1557A' 0x2
/proc/scsi/device_info:'HP' 'C3323-300' 0x20
/proc/scsi/device_info:'HP' 'C5713A' 0x40000
/proc/scsi/device_info:'HP' 'DF400' 0x240
/proc/scsi/device_info:'HP' 'DF500' 0x240
/proc/scsi/device_info:'HP' 'DF600' 0x240
/proc/scsi/device_info:'HP' 'OP-C-' 0x240
/proc/scsi/device_info:'HP' '3380-' 0x240
/proc/scsi/device_info:'HP' '3390
-' 0x240
/proc/scsi/device_info:'HP' '6586-' 0x240
/proc/scsi/device_info:'HP' '6588-' 0x240
/proc/scsi/device_info:'IBM' 'AuSaV1S2' 0x2
/proc/scsi/device_info:'IBM' 'ProFibre 4000R' 0x240
/proc/scsi/device_info:'IBM' '2105' 0x400000
/proc/scsi/device_info:'iomega' 'jaz 1GB' 0x21
/proc/scsi/device_info:'IOMEGA' 'ZIP' 0x21
/proc/scsi/device_info:'IOMEGA' 'Io20S         *F' 0x8
/proc/scsi/device_info:'INSITE' 'Floptical   F*8I' 0x8
/proc/scsi/device_info:'INSITE' 'I325VM' 0x8
/proc/scsi/device_info:'iRiver' 'iFP Mass Driver' 0x80400
/proc/scsi/device_info:'LASOUND' 'CDX7405' 0x90
/proc/scsi/device_info:'MATSHITA' 'PD-1' 0x12
/proc/scsi/device_info:'MATSHITA' 'DMC-LC5' 0x80400
/proc/scsi/device_info:'MATSHITA' 'DMC-LC40' 0x80400
/proc/scsi/device_info:'Medion' 'Flash XL  MMC/SD' 0x2
/proc/scsi/device_info:'MegaRAID' 'LD' 0x2
/proc/scsi/device_info:'MICROP' '4110' 0x20
/proc/scsi/device_info:'MYLEX' 'DACARMRB' 0x20000
/proc/scsi/device_info:'nCipher' 'Fastness Crypto' 0x2
/proc/scsi/device_info:'NAKAMICH' 'MJ-4.8S' 0x12
/proc/scsi/device_info:'NAKAMICH' 'MJ-5.16S' 0x12
/proc/scsi/device_info:'NEC' 'PD-1 ODX654P' 0x12
/proc/scsi/device_info:'NEC' 'iStorage' 0x20000
/proc/scsi/device_info:'NRC' 'MBR-7' 0x12
/proc/scsi/device_info:'NRC' 'MBR-7.4' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-600' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-602X' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-604X' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-624X' 0x12
/proc/scsi/device_info:'Promise' '' 0x40
/proc/scsi/device_info:'QUANTUM' 'XP34301' 0x20
/proc/scsi/device_info:'REGAL' 'CDC-4X' 0x90
/proc/scsi/device_info:'SanDisk' 'ImageMate CF-SD1' 0x2
/proc/scsi/device_info:'SEAGATE' 'ST34555N' 0x20
/proc/scsi/device_info:'SEAGATE' 'ST3390N' 0x20
/proc/scsi/device_info:'SGI' 'RAID3' 0x40
/proc/scsi/device_info:'SGI' 'RAID5' 0x40
/proc/scsi/device_info:'SGI' 'TP9100' 0x20000
/proc/scsi/device_info:'SGI' 'Universal Xport' 0x100000
/proc/scsi/device_info:'IBM' 'Universal Xport'
 0x100000
/proc/scsi/device_info:'SUN' 'Universal Xport' 0x100000
/proc/scsi/device_info:'DELL' 'Universal Xport' 0x100000
/proc/scsi/device_info:'SMSC' 'USB 2 HS-CF' 0x440
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-8001' 0x4
/proc/scsi/device_info:'SONY' 'TSL' 0x2
/proc/scsi/device_info:'ST650211' 'CF' 0x400000
/proc/scsi/device_info:'SUN' 'T300' 0x40
/proc/scsi/device_info:'SUN' 'T4' 0x40
/proc/scsi/device_info:'TEXEL' 'CD-ROM' 0x4
/proc/scsi/device_info:'Tornado-' 'F4' 0x40000
/proc/scsi/device_info:'TOSHIBA' 'CDROM' 0x100
/proc/scsi/device_info:'TOSHIBA' 'CD-ROM' 0x100
/proc/scsi/device_info:'Traxdata' 'CDR4120' 0x1
/proc/scsi/device_info:'USB2.0' 'SMARTMEDIA/XD' 0x402
/proc/scsi/device_info:'WangDAT' 'Model 2600' 0x200000
/proc/scsi/device_info:'WangDAT' 'Model 3200' 0x200000
/proc/scsi/device_info:'WangDAT' 'Model 1300' 0x200000
/proc/scsi/device_info:'WDC WD25' '00JB-00FUA0' 0x40000
/proc/scsi/device_info:'XYRATEX' 'RS' 0x240
/proc/scsi/device_info:'Zzyzx' 'RocketStor 500S' 0x40
/proc/scsi/device_info:'Zzyzx' 'RocketStor 2000' 0x40
/proc/scsi/scsi:Attached devices:
/proc/scsi/scsi:Host: scsi1 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: ATA      Model: WDC WD1600JD-00H Rev: 08.0
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 05
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: Generic  Model: USB SD Reader    Rev: 1.00
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 01
/proc/scsi/scsi:  Vendor: Generic  Model: USB CF Reader    Rev: 1.01
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 02
/proc/scsi/scsi:  Vendor: Generic  Model: USB SM Reader    Rev: 1.02
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 03
/proc/scsi/scsi:  Vendor: Generic  Model:
 USB MS Reader    Rev: 1.03
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi3 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: Slimtype Model: DVD A  DS8ACSH   Rev: LP56
/proc/scsi/scsi:  Type:   CD-ROM                           ANSI  SCSI revision: 00
root@dm8000:~# [6n

 

after restart still not working

in the media folder all i can see is hdd

 

This is what is inside fstab

rootfs               /                    auto       defaults              1  1
proc                 /proc                proc       defaults              0  0
devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
usbdevfs             /proc/bus/usb        usbdevfs   noauto                0  0
tmpfs                /var/volatile        tmpfs      defaults              0  0
/dev/sda1 /media/hdd auto defaults 0 0
 


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #11 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 16 August 2017 - 20:55

Thanks. Forgot one:

dmesg | grep sd

directly after a boot, so I can see what device is linked to which device node.

 

Did you add the "/dev/sda1" entry to fstab?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #12 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 16 August 2017 - 21:09

this is from dmesg | grep sd

sd 2:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
sd 2:0:0:1: [sdc] Attached SCSI removable disk
sd 2:0:0:2: [sdd] Attached SCSI removable disk
sd 2:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:0: [sdf] 1010176 512-byte logical blocks: (517 MB/493 MiB)
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
sd 4:0:0:0: [sdf] Attached SCSI removable disk
root@dm8000:~# [6n

 

yes i added the "/dev/sda1" to fstab


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #13 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 16 August 2017 - 21:55

According to this information, I see 3 SCSI buses:

scsi1:
- your WD harddisk (/dev/sda)
scsi2:
- SD reader (/dev/sdc)
- CF reader (/dev/sdd)
- SM reader (/dev/sde)
- MS reader (/dev/sdf)
scsi3:
- your DVD player (/dev/cdrom)

and what is the result if you remove the "/dev/sda1" from your fstab? What is the output of "mount" then?

 

There is no USB stick connected at the moment? I don't see any in the output. What does the dmesg command show when you also have plugged a USB stick in?

 

And is there any difference when you boot with the stick in, of when you plug the stick in when the box is already running?


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #14 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 16 August 2017 - 22:18

Now i have removed "/dev/sda1 from fstab this is what i get now

[H[Jroot@dm8000:~# [6n
ls -l /media


root@dm8000:~# [6n
mount


rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=74540k,nr_inodes=18635,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /media type tmpfs (rw,relatime,size=64k)
tmpfs on /var/volatile type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
root@dm8000:~# [6n
grep "" -r /proc/scsi


/proc/scsi/usb-storage/4:   Host scsi4: usb-storage
/proc/scsi/usb-storage/4:       Vendor: Generic
/proc/scsi/usb-storage/4:      Product: Mass Storage
/proc/scsi/usb-storage/4:Serial Number: F97DCB4B
/proc/scsi/usb-storage/4:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/4:    Transport: Bulk
/proc/scsi/usb-storage/4:       Quirks:
/proc/scsi/usb-storage/3:   Host scsi3: usb-storage
/proc/scsi/usb-storage/3:       Vendor: Sunplus Technology Co.,Ltd.
/proc/scsi/usb-storage/3:      Product: USB to Serial-ATA bridge
/proc/scsi/usb-storage/3:Serial Number: FFFFFFFE0D435636529241
/proc/scsi/usb-storage/3:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/3:    Transport: Bulk
/proc/scsi/usb-storage/3:       Quirks:
/proc/scsi/usb-storage/2:   Host scsi2: usb-storage
/proc/scsi/usb-storage/2:       Vendor: Generic
/proc/scsi/usb-storage/2:      Product: Mass Storage Device
/proc/scsi/usb-storage/2:Serial Number: 058F312D81B
/proc/scsi/usb-storage/2:     Protocol: Transparent SCSI
/proc/scsi/usb-storage/2:    Transport: Bulk
/proc/scsi/usb-storage/2:       Quirks:
/proc/scsi/device_info:'Aashima' 'IMAGERY 2400SP' 0x1
/proc/scsi/device_info:'CHINON' 'CD-ROM CDS-431' 0x1
/proc/scsi/device_info:'CHINON' 'CD-ROM CDS-535' 0x1
/proc/scsi/device_info:'DENON' 'DRD-25X' 0x1
/proc/scsi/device_info:'HITACHI' 'DK312C' 0x1
/proc/scsi/device_info:'HITACHI' 'DK314C' 0x1
/proc/scsi/device_info:'IBM' '2104-DU3' 0x1
/pr
oc/scsi/device_info:'IBM' '2104-TU3' 0x1
/proc/scsi/device_info:'IMS' 'CDD521/10' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-3280' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-4380S' 0x1
/proc/scsi/device_info:'MAXTOR' 'MXT-1240S' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-4170S' 0x1
/proc/scsi/device_info:'MAXTOR' 'XT-8760S' 0x1
/proc/scsi/device_info:'MEDIAVIS' 'RENO CD-ROMX2A' 0x1
/proc/scsi/device_info:'MICROTEK' 'ScanMakerIII' 0x1
/proc/scsi/device_info:'NEC' 'CD-ROM DRIVE:841' 0x1
/proc/scsi/device_info:'PHILIPS' 'PCA80SC' 0x1
/proc/scsi/device_info:'RODIME' 'RO3000S' 0x1
/proc/scsi/device_info:'SUN' 'SENA' 0x1
/proc/scsi/device_info:'SANYO' 'CRD-250S' 0x1
/proc/scsi/device_info:'SEAGATE' 'ST157N' 0x1
/proc/scsi/device_info:'SEAGATE' 'ST296' 0x1
/proc/scsi/device_info:'SEAGATE' 'ST1581' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-541' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-55S' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-561' 0x1
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-8012' 0x1
/proc/scsi/device_info:'SONY' 'SDT-5000' 0x200000
/proc/scsi/device_info:'TANDBERG' 'TDC 3600' 0x1
/proc/scsi/device_info:'TEAC' 'CD-R55S' 0x1
/proc/scsi/device_info:'TEAC' 'CD-ROM' 0x1
/proc/scsi/device_info:'TEAC' 'MT-2ST/45S2-27' 0x1
/proc/scsi/device_info:'HP' 'C1750A' 0x1
/proc/scsi/device_info:'HP' 'C1790A' 0x1
/proc/scsi/device_info:'HP' 'C2500A' 0x1
/proc/scsi/device_info:'MEDIAVIS' 'CDR-H93MV' 0x1
/proc/scsi/device_info:'MICROTEK' 'ScanMaker II' 0x1
/proc/scsi/device_info:'MITSUMI' 'CD-R CR-2201CS' 0x1
/proc/scsi/device_info:'NEC' 'D3856' 0x1
/proc/scsi/device_info:'QUANTUM' 'LPS525S' 0x1
/proc/scsi/device_info:'QUANTUM' 'PD1225S' 0x1
/proc/scsi/device_info:'QUANTUM' 'FIREBALL ST4.3S' 0x1
/proc/scsi/device_info:'RELISYS' 'Scorpio' 0x1
/proc/scsi/device_info:'SANKYO' 'CP525' 0x1
/proc/scsi/device_info:'TEXEL' 'CD-ROM' 0x1
/proc/scsi/device_info:'transtec' 'T5008' 0x40000
/proc/scsi/device_info:'YAMAHA' 'CDR100' 0x1
/proc/scsi/device_info:'YAMAHA' 'CDR102' 0x1
/proc/scsi/device_info
:'YAMAHA' 'CRW8424S' 0x1
/proc/scsi/device_info:'YAMAHA' 'CRW6416S' 0x1
/proc/scsi/device_info:'' 'Scanner' 0x1
/proc/scsi/device_info:'3PARdata' 'VV' 0x20000
/proc/scsi/device_info:'ADAPTEC' 'AACRAID' 0x2
/proc/scsi/device_info:'ADAPTEC' 'Adaptec 5400S' 0x2
/proc/scsi/device_info:'AFT PRO' '-IX CF' 0x2
/proc/scsi/device_info:'BELKIN' 'USB 2 HS-CF' 0x402
/proc/scsi/device_info:'BROWNIE' '1200U3P' 0x40000
/proc/scsi/device_info:'BROWNIE' '1600U3P' 0x40000
/proc/scsi/device_info:'CANON' 'IPUBJD' 0x40
/proc/scsi/device_info:'CBOX3' 'USB Storage-SMC' 0x402
/proc/scsi/device_info:'CMD' 'CRA-7280' 0x40
/proc/scsi/device_info:'CNSI' 'G7324' 0x40
/proc/scsi/device_info:'CNSi' 'G8324' 0x40
/proc/scsi/device_info:'COMPAQ' 'ARRAY CONTROLLER' 0x820240
/proc/scsi/device_info:'COMPAQ' 'LOGICAL VOLUME' 0x800002
/proc/scsi/device_info:'COMPAQ' 'CR3500' 0x2
/proc/scsi/device_info:'COMPAQ' 'MSA1000' 0x1040
/proc/scsi/device_info:'COMPAQ' 'MSA1000 VOLUME' 0x1040
/proc/scsi/device_info:'COMPAQ' 'HSV110' 0x21000
/proc/scsi/device_info:'DDN' 'SAN DataDirector' 0x40
/proc/scsi/device_info:'DEC' 'HSG80' 0x21000
/proc/scsi/device_info:'DELL' 'PV660F' 0x40
/proc/scsi/device_info:'DELL' 'PV660F   PSEUDO' 0x40
/proc/scsi/device_info:'DELL' 'PSEUDO DEVICE .' 0x40
/proc/scsi/device_info:'DELL' 'PV530F' 0x40
/proc/scsi/device_info:'DELL' 'PERCRAID' 0x2
/proc/scsi/device_info:'DGC' 'RAID' 0x40
/proc/scsi/device_info:'DGC' 'DISK' 0x40
/proc/scsi/device_info:'EMC' 'Invista' 0x240
/proc/scsi/device_info:'EMC' 'SYMMETRIX' 0x242
/proc/scsi/device_info:'EMULEX' 'MD21/S2     ESDI' 0x10
/proc/scsi/device_info:'easyRAID' '16P' 0x40000
/proc/scsi/device_info:'easyRAID' 'X6P' 0x40000
/proc/scsi/device_info:'easyRAID' 'F8' 0x40000
/proc/scsi/device_info:'FSC' 'CentricStor' 0x240
/proc/scsi/device_info:'Generic' 'USB SD Reader' 0x402
/proc/scsi/device_info:'Generic' 'USB Storage-SMC' 0x402
/proc/scsi/device_info:'Generic' 'USB Storage-SMC' 0x402
/proc/scsi/device_info:'HITACHI' 'DF400' 0x20000
/proc/scsi/device_info:
'HITACHI' 'DF500' 0x20000
/proc/scsi/device_info:'HITACHI' 'DISK-SUBSYSTEM' 0x20000
/proc/scsi/device_info:'HITACHI' 'OPEN-' 0x20000
/proc/scsi/device_info:'HITACHI' 'OP-C-' 0x240
/proc/scsi/device_info:'HITACHI' '3380-' 0x240
/proc/scsi/device_info:'HITACHI' '3390-' 0x240
/proc/scsi/device_info:'HITACHI' '6586-' 0x240
/proc/scsi/device_info:'HITACHI' '6588-' 0x240
/proc/scsi/device_info:'HP' 'A6189A' 0x240
/proc/scsi/device_info:'HP' 'OPEN-' 0x20000
/proc/scsi/device_info:'HP' 'NetRAID-4M' 0x2
/proc/scsi/device_info:'HP' 'HSV100' 0x21000
/proc/scsi/device_info:'HP' 'C1557A' 0x2
/proc/scsi/device_info:'HP' 'C3323-300' 0x20
/proc/scsi/device_info:'HP' 'C5713A' 0x40000
/proc/scsi/device_info:'HP' 'DF400' 0x240
/proc/scsi/device_info:'HP' 'DF500' 0x240
/proc/scsi/device_info:'HP' 'DF600' 0x240
/proc/scsi/device_info:'HP' 'OP-C-' 0x240
/proc/scsi/device_info:'HP' '3380-' 0x240
/proc/scsi/device_info:'HP' '3390-' 0x240
/proc/scsi/device_info:'HP' '6586-' 0x240
/proc/scsi/device_info:'HP' '6588-' 0x240
/proc/scsi/device_info:'IBM' 'AuSaV1S2' 0x2
/proc/scsi/device_info:'IBM' 'ProFibre 4000R' 0x240
/proc/scsi/device_info:'IBM' '2105' 0x400000
/proc/scsi/device_info:'iomega' 'jaz 1GB' 0x21
/proc/scsi/device_info:'IOMEGA' 'ZIP' 0x21
/proc/scsi/device_info:'IOMEGA' 'Io20S         *F' 0x8
/proc/scsi/device_info:'INSITE' 'Floptical   F*8I' 0x8
/proc/scsi/device_info:'INSITE' 'I325VM' 0x8
/proc/scsi/device_info:'iRiver' 'iFP Mass Driver' 0x80400
/proc/scsi/device_info:'LASOUND' 'CDX7405' 0x90
/proc/scsi/device_info:'MATSHITA' 'PD-1' 0x12
/proc/scsi/device_info:'MATSHITA' 'DMC-LC5' 0x80400
/proc/scsi/device_info:'MATSHITA' 'DMC-LC40' 0x80400
/proc/scsi/device_info:'Medion' 'Flash XL  MMC/SD' 0x2
/proc/scsi/device_info:'MegaRAID' 'LD' 0x2
/proc/scsi/device_info:'MICROP' '4110' 0x20
/proc/scsi/device_info:'MYLEX' 'DACARMRB' 0x20000
/proc/scsi/device_info:'nCipher' 'Fastness Crypto' 0x2
/proc/scsi/device_info:'NAKAMICH' 'MJ-4.8S' 0x12
/proc/scsi/device_info:'NAKAMICH' 'MJ-5.16S' 0x12
/pro
c/scsi/device_info:'NEC' 'PD-1 ODX654P' 0x12
/proc/scsi/device_info:'NEC' 'iStorage' 0x20000
/proc/scsi/device_info:'NRC' 'MBR-7' 0x12
/proc/scsi/device_info:'NRC' 'MBR-7.4' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-600' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-602X' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-604X' 0x12
/proc/scsi/device_info:'PIONEER' 'CD-ROM DRM-624X' 0x12
/proc/scsi/device_info:'Promise' '' 0x40
/proc/scsi/device_info:'QUANTUM' 'XP34301' 0x20
/proc/scsi/device_info:'REGAL' 'CDC-4X' 0x90
/proc/scsi/device_info:'SanDisk' 'ImageMate CF-SD1' 0x2
/proc/scsi/device_info:'SEAGATE' 'ST34555N' 0x20
/proc/scsi/device_info:'SEAGATE' 'ST3390N' 0x20
/proc/scsi/device_info:'SGI' 'RAID3' 0x40
/proc/scsi/device_info:'SGI' 'RAID5' 0x40
/proc/scsi/device_info:'SGI' 'TP9100' 0x20000
/proc/scsi/device_info:'SGI' 'Universal Xport' 0x100000
/proc/scsi/device_info:'IBM' 'Universal Xport' 0x100000
/proc/scsi/device_info:'SUN' 'Universal Xport' 0x100000
/proc/scsi/device_info:'DELL' 'Universal Xport' 0x100000
/proc/scsi/device_info:'SMSC' 'USB 2 HS-CF' 0x440
/proc/scsi/device_info:'SONY' 'CD-ROM CDU-8001' 0x4
/proc/scsi/device_info:'SONY' 'TSL' 0x2
/proc/scsi/device_info:'ST650211' 'CF' 0x400000
/proc/scsi/device_info:'SUN' 'T300' 0x40
/proc/scsi/device_info:'SUN' 'T4' 0x40
/proc/scsi/device_info:'TEXEL' 'CD-ROM' 0x4
/proc/scsi/device_info:'Tornado-' 'F4' 0x40000
/proc/scsi/device_info:'TOSHIBA' 'CDROM' 0x100
/proc/scsi/device_info:'TOSHIBA' 'CD-ROM' 0x100
/proc/scsi/device_info:'Traxdata' 'CDR4120' 0x1
/proc/scsi/device_info:'USB2.0' 'SMARTMEDIA/XD' 0x402
/proc/scsi/device_info:'WangDAT' 'Model 2600' 0x200000
/proc/scsi/device_info:'WangDAT' 'Model 3200' 0x200000
/proc/scsi/device_info:'WangDAT' 'Model 1300' 0x200000
/proc/scsi/device_info:'WDC WD25' '00JB-00FUA0' 0x40000
/proc/scsi/device_info:'XYRATEX' 'RS' 0x240
/proc/scsi/device_info:'Zzyzx' 'RocketStor 500S' 0x40
/proc/scsi/device_info:'Zzyzx' 'RocketStor 2000' 0x40
/proc/scsi/scsi:Attached devices:

/proc/scsi/scsi:Host: scsi1 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: ATA      Model: WDC WD1600JD-00H Rev: 08.0
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 05
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: Generic  Model: USB SD Reader    Rev: 1.00
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 01
/proc/scsi/scsi:  Vendor: Generic  Model: USB CF Reader    Rev: 1.01
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 02
/proc/scsi/scsi:  Vendor: Generic  Model: USB SM Reader    Rev: 1.02
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi2 Channel: 00 Id: 00 Lun: 03
/proc/scsi/scsi:  Vendor: Generic  Model: USB MS Reader    Rev: 1.03
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi3 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: Slimtype Model: DVD A  DS8ACSH   Rev: LP56
/proc/scsi/scsi:  Type:   CD-ROM                           ANSI  SCSI revision: 00
/proc/scsi/scsi:Host: scsi4 Channel: 00 Id: 00 Lun: 00
/proc/scsi/scsi:  Vendor: Generic  Model: Flash Disk       Rev: 8.07
/proc/scsi/scsi:  Type:   Direct-Access                    ANSI  SCSI revision: 02
root@dm8000:~# [6n
dmesg | grep sd


sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:1: [sdc] Attached SCSI removable disk
sd 2:0:0:2: [sdd] Attached SCSI removable disk
sd 2:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:0: [sdf] 1010176 512-byte logical blocks: (517 MB/493 MiB)
sd 4:0:0:0: [sdf] Write Protect is off
sd 4:0:0:0: [sdf] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 4:0:0:0: [sdf] No Caching mode page found
sd 4:0:0:0: [sdf] Assuming drive cache: write through
sd 4:0:0:0: [sdf] Attached SCSI removable disk
root@dm8000:~# [6n

 

 

this is what now inside fstab

rootfs               /                    auto       defaults              1  1
proc                 /proc                proc       defaults              0  0
devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
usbdevfs             /proc/bus/usb        usbdevfs   noauto                0  0
tmpfs                /var/volatile        tmpfs      defaults              0  0
 

so now cant see hdd in media folder


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #15 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 16 August 2017 - 22:23

so i am think i need "/dev/sda1 in fstab for the hdd to work plus i think i need more lines in fstab for the usb's and cf ?


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #16 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 17 August 2017 - 00:31

hi WanWizard

 

i have set fstab like thisrootfs               /                    auto       defaults              1  1
proc                 /proc                proc       defaults              0  0
devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
usbdevfs             /proc/bus/usb        usbdevfs   noauto                0  0
tmpfs                /var/volatile        tmpfs      defaults              0  0
/dev/sda1 /media/hdd auto defaults 0 0
/dev/sdc1 /media/sd auto defaults 0 0
/dev/sdd1 /media/cf auto defaults 0 0
/dev/sdf1 /media/ms auto defaults 0 0
/dev/sde1 /media/sm auto defaults 0 0

 

now i can read the data on the usb stick but if i pull the stick out then plug back in then i cant see usb stick until i do a reboot so i think something is still missing.

So WanWizard cheers for your help
 


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #17 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 17 August 2017 - 10:14

You should not have to do this, this should happen automatically using mdev. Same for when you public in a USB stick, it should automatically create /media/usb.

 

It looks like there is something seriously broken in the software on your box. It might be a good idea to make a backup of your settings (autobackup plugin, enable autoinstall, and make the backup on a usb stick, leave that stick plugged in when you flash) and flash with the latest image. After the flash, when the box reboots, it will prompt you for a restore of your backup.


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #18 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 17 August 2017 - 17:16

Hi WanWizard

thanks for all your advice i will flash the latest image. what would be better image to use open4 or open6 ?


Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #19 WanWizard

  • PLi® Core member
  • 70,839 posts

+1,832
Excellent

Posted 17 August 2017 - 17:18

Doesn't really matter. Either way, you have to flash again soon, when 6.0 will be released (as 4 will become EoL, and 6.0-rc will seize to exist).


Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)

Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.

Many answers to your question can be found in our new and improved wiki.

Re: After having upgraded DM8000 OpenPLi4 USB won't work anymore. #20 grommit63

  • Member
  • 14 posts

0
Neutral

Posted 18 August 2017 - 21:49

hi WanWizard

 

dm8000 100% up and running now i got the dm off ebay secondhand for £50 but looks like new still as the film on the front and boxed but was abit worried it

might of been a clone but seem now is Genuine

 

thanks


Back to [EN] Enduser support

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support