Jump to content


Photo

New feature for IPTV streams.. If possible PLEASE


  • Please log in to reply
13 replies to this topic

#1 qusuda

  • Member
  • 5 posts

0
Neutral

Posted 23 August 2017 - 10:25

Functionality to keep alive IPTV HTTP.ts streams.

 

IPTV streams are very often not very useful to use, because the HTTP connections often interrupts or times outs.

The buffer is helping, but not good enough to keep it alive.

Typical the picture freeze after 1-2 minutes and the "user" must do something active (e.g change channel up and down to get the stream alive again).

 

In Windows VLC player is there a "Loop function" the user can select to prevent this problem. This feature will make the HTTP connection stay alive in case of interruption or time outs.

 

I have not yet found any IPTV TS stream on the Internet, that will keep alive for more than max 2 minutes. So this must be a big problem.

I can tell my Internet is a stable 100 Mbit connection.

 

Other solutions for Enigm2

 

Plugin IPTV Player: Yes this have a feature for this when rename .TS to M3U8. BUT there is a buffering bug. So you get max 10 minutes before toy gan an error from the software. (No freezing picture)

 

Plugin: IPTV World: Yes this plugin have 3 payers to select. Player 2 and 3 actually works 100 %. But it can not read all .TS streams ?? In this case the stream never starts. This plugin is also crashing sometimes :-(

 

So at this moment i can't find any solution that will make IPTV usefull..

 

Hope you can see the problem and find a working stable solution

 

/Qusuda


Edited by qusuda, 23 August 2017 - 10:29.


Re: New feature for IPTV streams.. If possible PLEASE #2 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 23 August 2017 - 15:27

The IPTV that you try to use are of poor quality if you have such problem.
 
First be sure to use: OpenPLi RC6 to test streaming because it works better than OpenPLi 4 (you didn't even mention which OpenPLi version you use and on which hardware).
 
If you want you can use another external player into OpenPLi.
 
Simply type:
 

opkg update
opkg install ffmpeg
opkg install exteplayer3
opkg install enigma2-plugin-systemplugins-serviceapp

Then in the channel list you can use type 5001 or 5002 and with ServiceApp you can configure the external player that you want to use.

And you can also play with different parameters like the buffer size.

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: New feature for IPTV streams.. If possible PLEASE #3 Demetris

  • Senior Member
  • 94 posts

0
Neutral

Posted 23 August 2017 - 16:52

Will this setup be useful for tvheadend ? or i need diff one?

Can i setup timer recordings too?

EPG ok?

Thank you for the help.



Re: New feature for IPTV streams.. If possible PLEASE #4 qusuda

  • Member
  • 5 posts

0
Neutral

Posted 23 August 2017 - 23:17


Thanks for the information about trying external players into OpenPli.
Ill try that out.

Yes the problem is pool quality. But it seems all streams i have tryed Ever are more or less pool quality ?
All and i mean ALL .TS streams i have tryed do a short interrupt at som time, and the player just give up the stream...picture freeze and does not return again.

Yes, sorry i forgot to mention that i'm on OpenPLi RC6 with hardware ET9000.
I really hoped getting from OpenPLi 4 to OpenPLi RC 6 Would solve the problem. But there is no difference on the IPTV streams.

Anyway OpenPLi RC6 is really great. Thanks for the good work.

I'll Be back here with a status after testing the external players on the IP streams.


/Qusuda

Re: New feature for IPTV streams.. If possible PLEASE #5 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 24 August 2017 - 08:07

Hi,

 

if you use  free IPV list found over the Internet many people use them and some have a limited number of concurrent user possible (sometimes it is only one), so when you start to watch you drop somebody else connection if the other one zap back to the channel you lost your connection and he retrieves its viewing.

Testing IPTV quality with daily updated list found on the internet is not the better way to get a good idea on how IPTV works.

 

You can test some public official stream thanks to this list:

 

https://forums.openp...ls-service-ref/

 

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: New feature for IPTV streams.. If possible PLEASE #6 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 24 August 2017 - 08:11

Will this setup be useful for tvheadend ? or i need diff one?

Can i setup timer recordings too?

EPG ok?

Thank you for the help.

 

I don't use tvheadend so I cannot answer.

Recording creates 2 streams and some provider limit to only one stream.

EPG it's up to you to properly generates the EPG entries if you want to integrate IPTV in your favorites/bouquets. When properly done, yes it works.


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: New feature for IPTV streams.. If possible PLEASE #7 littlesat

  • PLi® Core member
  • 57,159 posts

+698
Excellent

Posted 24 August 2017 - 10:18

The only thing what you can do is detect if a stream play stops and when this stopped for x seconds try to replay or so...

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: New feature for IPTV streams.. If possible PLEASE #8 qusuda

  • Member
  • 5 posts

0
Neutral

Posted 24 August 2017 - 21:04

Seems there is a problem installing the serviceapp ?

 

root@et9x00:~# opkg install enigma2-plugin-systemplugins-serviceapp
opkg: error while loading shared libraries: /lib/libz.so.1: file too short

 

Any clue ?

 

 

/Qusuda



Re: New feature for IPTV streams.. If possible PLEASE #9 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 25 August 2017 - 09:08

Hi,

 

Have you done an:

opkg update

Before trying to install?

 

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: New feature for IPTV streams.. If possible PLEASE #10 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 25 August 2017 - 09:18

Hi,

 

Another point is that ET-9000 flash start to become a little bit short if you install many plugins, I didn't check the size of serviceapp and exteplayer3 to be sure that there is still enough flash space on the ET-9000. You will perhaps need to use flashexpander then.

 

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: New feature for IPTV streams.. If possible PLEASE #11 sokalsondha

  • Member
  • 7 posts

0
Neutral

Posted 15 September 2017 - 07:41

The only thing what you can do is detect if a stream play stops and when this stopped for x seconds try to replay or so...

thats what i am looking for too

but how can we do it? i can see i am using the Enigma2 HbbTV/1.1.1 (+PVR+RTSP+DL;openATV;;;) this player

can someone please help on this. we need something loop in the IPTV



Re: New feature for IPTV streams.. If possible PLEASE #12 sokalsondha

  • Member
  • 7 posts

0
Neutral

Posted 15 September 2017 - 08:02

The IPTV that you try to use are of poor quality if you have such problem.
 
First be sure to use: OpenPLi RC6 to test streaming because it works better than OpenPLi 4 (you didn't even mention which OpenPLi version you use and on which hardware).
 
If you want you can use another external player into OpenPLi.
 
Simply type:
 

opkg update
opkg install ffmpeg
opkg install exteplayer3
opkg install enigma2-plugin-systemplugins-serviceapp

Then in the channel list you can use type 5001 or 5002 and with ServiceApp you can configure the external player that you want to use.

And you can also play with different parameters like the buffer size.

Pr2

thanks for this information

i did everything. but when i put 5001 or 5002 my channel not play. you said something about configure the external player. how do i configure this?

thanks



Re: New feature for IPTV streams.. If possible PLEASE #13 Pr2

  • PLi® Contributor
  • 6,181 posts

+261
Excellent

Posted 15 September 2017 - 10:18

Menu - Parameters - System - ServiceApp

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: New feature for IPTV streams.. If possible PLEASE #14 sokalsondha

  • Member
  • 7 posts

0
Neutral

Posted 15 September 2017 - 22:45

The only thing what you can do is detect if a stream play stops and when this stopped for x seconds try to replay or so...

hello boss

yes we want like this if the streams stop play the player try to start the streams within 1 seconds and keep continue until its start. can you tell me please how we can do it??




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users