Posted 19 October 2017 - 14:47
I guess he expects to see harddisk and root as accessable maps when he opens his network places in his windows explorer. When he double clicks the maps the tree-structure of enigma wil show. Don't you think so?
Verstuurd vanaf mijn SM-A310F met Tapatalk
Exactly.
I have tryed to relaunch the network on my vu+ and i have exactly the same problem.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 15:05
Looks like yea ,but it was not enabled on rc too and i could acces the box through win explorer
This thread may help solving Samba problems:
https://forums.openp...ba-not-working/
opkg remove samba
rm -rf /etc/samba
opkg install samba
Edited by Eragon, 19 October 2017 - 15:09.
Posted 19 October 2017 - 15:16
all right, but how can i do it ? By telnet on a PC ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 15:18
Ancient thread.
You wrote you restored a backup. Did you make any modification to the smb.conf while on OpenPLi 4? 6.0-release runs a much more modern version of samba, and the config isn't 100% compatible, so that could be the cause of Samba not starting.
To verify, press menu, select information, about, press the yellow button, press right until you get to "Troubleshoot - ps". Do you see "/usr/sbin/smbd" in the list?
Needed to find a Windows PC, but If I go into explorer and type "\\hd2400" (or \\<ipaddress>), I get the share list without any issues.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 15:45
By telnet / root :
- error on the first line opkg...
- the rest is ok but no access to the vu+ by a PC / Windows Explorer.
Yes, i retored only the paramters of the 6.0 RC, after the flash of the 6.0 Stable
Impossible to find "Troubleshoot - ps".
I have installed Dream-Explorer and i have "usr/sbin/smbd"
I asked me if don't restored the 6.0 RC ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 16:18
Then you didn't do what I wrote.
Press the menu button. Select "Information", select "About". Press the yellow button ("Troubleshoot"). Press right to cycle through the troubleshoot screens until you get to "ps":
1_0_19_5225_C99_3_EB0000_0_0_0.jpg 136.38KB
16 downloads
It is not relevant if you have the file, it is relevant if the process runs. Which the screen above will show you.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 16:35
Sorry, i make a mistake, it's my poor english 
So, there no process "usr/sbin/smbd".
What i have to do to start samba ?
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 16:46
Samba starts automatically if it is installed. So if it doesn't run, changes are it is because an unsupported config.
You can check in /var/log/log.smbd and /var/log/log.nmbd to see if there is an error message. If the log files aren't there either, it might not be installed. To check that, you need to login and issue the command
opkg list samba
it should reply with the details of the package, with status
Status: install ok installed
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 16:53
I used Drfeam-Explorer to see the files and this 2 files are empty.
I have a directory samba which is empty too.
Here my PS to show you :
Edited by zebulon7, 19 October 2017 - 16:55.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 16:59
Then you'll have to login with telnet, and issue the command I gave you.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 17:13
Samba starts automatically if it is installed. So if it doesn't run, changes are it is because an unsupported config.
You can check in /var/log/log.smbd and /var/log/log.nmbd to see if there is an error message. If the log files aren't there either, it might not be installed. To check that, you need to login and issue the command
opkg list sambait should reply with the details of the package, with status
Status: install ok installed
Logged in root.
I have exactly this :
samba - 4.4.5-r0.0 - samba version 4.4.5-r0 samba version 4.4.5-r0.
Samba seems not installed, no ?
I have just noticed tha there no directory /etc/samba ???
Edited by zebulon7, 19 October 2017 - 17:17.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 17:34
I am astonished 
I flash my vu+ again and all is come back normal !
I don't understand.
In any case, thank you for your patience.
Edited by zebulon7, 19 October 2017 - 17:36.
Vu+ Duo 4K SE / OpenATV 7.4 / Double Tuner TNT
Vu+ Duo2 / OpenPLi 9.0 / Double Tuner TNT
Posted 19 October 2017 - 17:49
No problem, glad you've got it fixed!
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 20:38
Looks like yea ,but it was not enabled on rc too and i could acces the box through win explorer
This thread may help solving Samba problems:
https://forums.openp...ba-not-working/
opkg remove samba
rm -rf /etc/samba
opkg install samba
ok i did it and reboot the box
it is still the same , and windows troubleshooting say " The device or resource (VUDUO2) is not configured to accept connections to the "File and Printer Sharing (SMB)" port."
there's no log in var/log/samba and opkg list samba give me that "samba - 4.4.5-r0.0 - samba version 4.4.5-r0 samba version 4.4.5-r0" but no status
Posted 19 October 2017 - 20:45
My bad, sorry. The correct command is "opkg info samba". It should return:
[wanwizard@catwoman] $ telnet 172.16.1.43 Trying 172.16.1.43... Connected to 172.16.1.43. Escape character is '^]'. openpli 6.0-release hd2400 hd2400 login: root Password: Last login: Thu Oct 19 16:46:09 IST 2017 on pts/0 root@hd2400:~# opkg info samba Package: samba Version: 4.4.5-r0.0 Depends: krb5 (>= 1.13.6), libaio1 (>= 0.3.110), libavahi-client3 (>= 0.6.32), libavahi-common3 (>= 0.6.32), libbsd0 (>= 0.8.3), libc6 (>= 2.24), libcom-err2 (>= 1.43), libdbus-1-3 (>= 1.10.10), libldap-2.4-2 (>= 2.4.44), libldb (>= 1.1.27), libnetapi0 (>= 4.4.5), libpam (>= 1.3.0), libpopt0 (>= 1.16), libpython2.7-1.0 (>= 2.7.12), libsamba-base (>= 4.4.5), libtalloc (>= 2.1.8), libtdb1 (>= 1.3.10), libtevent0 (>= 0.9.29), libwbclient0 (>= 4.4.5), libz1 (>= 1.2.8), samba-base Status: install ok installed Section: console/network Architecture: mips32el Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org> MD5Sum: a06132397456728a6c7cb007b376ef7b Size: 3630048 Filename: samba_4.4.5-r0.0_mips32el.ipk Source: http://samba.org/samba/ftp/stable/samba-4.4.5.tar.gz file://00-fix-typos-in-man-pages.patch file://10-use-only-libsystemd.patch file://16-do-not-check-xsltproc-manpages.patch file://20-do-not-import-target-module-while-cross-compile.patch file://21-add-config-option-without-valgrind.patch file://0006-avoid-using-colon-in-the-checking-msg.patch file://volatiles.03_samba file://smb.conf file://samba.sh Description: samba version 4.4.5-r0 samba version 4.4.5-r0. Installed-Time: 1507982672
If it is not installed, it will say
Status: unknown ok not-installed
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 21:01
My bad, sorry. The correct command is "opkg info samba". It should return:
[wanwizard@catwoman] $ telnet 172.16.1.43 Trying 172.16.1.43... Connected to 172.16.1.43. Escape character is '^]'. openpli 6.0-release hd2400 hd2400 login: root Password: Last login: Thu Oct 19 16:46:09 IST 2017 on pts/0 root@hd2400:~# opkg info samba Package: samba Version: 4.4.5-r0.0 Depends: krb5 (>= 1.13.6), libaio1 (>= 0.3.110), libavahi-client3 (>= 0.6.32), libavahi-common3 (>= 0.6.32), libbsd0 (>= 0.8.3), libc6 (>= 2.24), libcom-err2 (>= 1.43), libdbus-1-3 (>= 1.10.10), libldap-2.4-2 (>= 2.4.44), libldb (>= 1.1.27), libnetapi0 (>= 4.4.5), libpam (>= 1.3.0), libpopt0 (>= 1.16), libpython2.7-1.0 (>= 2.7.12), libsamba-base (>= 4.4.5), libtalloc (>= 2.1.8), libtdb1 (>= 1.3.10), libtevent0 (>= 0.9.29), libwbclient0 (>= 4.4.5), libz1 (>= 1.2.8), samba-base Status: install ok installed Section: console/network Architecture: mips32el Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org> MD5Sum: a06132397456728a6c7cb007b376ef7b Size: 3630048 Filename: samba_4.4.5-r0.0_mips32el.ipk Source: http://samba.org/samba/ftp/stable/samba-4.4.5.tar.gz file://00-fix-typos-in-man-pages.patch file://10-use-only-libsystemd.patch file://16-do-not-check-xsltproc-manpages.patch file://20-do-not-import-target-module-while-cross-compile.patch file://21-add-config-option-without-valgrind.patch file://0006-avoid-using-colon-in-the-checking-msg.patch file://volatiles.03_samba file://smb.conf file://samba.sh Description: samba version 4.4.5-r0 samba version 4.4.5-r0. Installed-Time: 1507982672If it is not installed, it will say
Status: unknown ok not-installed
Edited by blunt, 19 October 2017 - 21:01.
Posted 19 October 2017 - 21:18
Ok, so it is installed. Good. Next check, see if it is running:
root@hd2400:~# ps | grep mbd
540 root 31372 S /usr/sbin/smbd
542 root 29916 S {smbd-notifyd} /usr/sbin/smbd
543 root 29916 S {cleanupd} /usr/sbin/smbd
545 root 20600 S /usr/sbin/nmbd
1278 root 2784 S grep mbd
You should see both "smbd" and "nmbd". If it is not running, check the logs files "/var/log/smbd.log" and "/var/log/nmbd.log" for error messages. If nothing obvious, try if you can start samba by hand:
/etc/init.d/samba.sh start
and see if that gives you an error message.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 21:26
Ok, so it is installed. Good. Next check, see if it is running:
root@hd2400:~# ps | grep mbd 540 root 31372 S /usr/sbin/smbd 542 root 29916 S {smbd-notifyd} /usr/sbin/smbd 543 root 29916 S {cleanupd} /usr/sbin/smbd 545 root 20600 S /usr/sbin/nmbd 1278 root 2784 S grep mbdYou should see both "smbd" and "nmbd". If it is not running, check the logs files "/var/log/smbd.log" and "/var/log/nmbd.log" for error messages. If nothing obvious, try if you can start samba by hand:
/etc/init.d/samba.sh startand see if that gives you an error message.
Edited by blunt, 19 October 2017 - 21:29.
Posted 19 October 2017 - 21:27
Ok. So what is in the logs?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Posted 19 October 2017 - 21:31
all logs are empties
Ok. So what is in the logs?
0 members, 1 guests, 0 anonymous users
