Jump to content


Photo

Pli 6 hangs when I stop a movie


  • Please log in to reply
218 replies to this topic

Re: Pli 6 hangs when I stop a movie #21 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,494 posts

+397
Excellent

Posted 27 October 2017 - 16:06

I just tested your scenario on my Ultimo 4K but unfortunately (for you) I can't confirm what you experienced. I tested several different movies and speeds and stopped playing with the stop button. In my situation live TV starts without any problem. I haven't tried just stopping the movies without returning to live watching TV.

Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: Pli 6 hangs when I stop a movie #22 lupus44

  • Member
  • 24 posts

+1
Neutral

Posted 27 October 2017 - 16:26

Hello,

 

I have a VU Ultimo 4K too, and I meet exactly the same problem as reported by sjlouis. I'm under the Pli 6 updated today.

Reading a recording of BBCTwo HD normaly, after an acceleration at x 16 and stop, Pli hangs and  the spinner starts to turn. I must  to reset by the rear button. I do not have a connection with the PC and do not use Telnet. I don't control scripts very well. I'm just pointing out the problem. The internal HDD is a Crucial 500 Go SSD, a very recent one.

Edited by lupus44, 27 October 2017 - 16:29.


Re: Pli 6 hangs when I stop a movie #23 Pr2

  • PLi® Contributor
  • 6,182 posts

+261
Excellent

Posted 27 October 2017 - 17:35

@lupus44,

 

Which skin do you use?

 

Pr2


NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pli 6 hangs when I stop a movie #24 sjlouis

  • Senior Member
  • 1,573 posts

+3
Neutral

Posted 27 October 2017 - 17:36

Yes I've done tests with different files and different speeds. When I stop a movie, the stb returns to the list of movies. in this case, it closes the movie and returns to the list of movies but the screen stays black while the background of my skin is blue and in the small window, the movie continues to run in 4x speed a few seconds before stopping on the picture (as pause).

 

I can do test with an simple flash without any plugin.


Vu+ Ultimo 4K - OpenPli 8.3

Xtrend ET9200 - OpenPli 6.2


Re: Pli 6 hangs when I stop a movie #25 lupus44

  • Member
  • 24 posts

+1
Neutral

Posted 27 October 2017 - 18:32

Senior member,

 

I've always used the default PLI Skin,  both with PLI 4 and PLI 6. I never change the skin



Re: Pli 6 hangs when I stop a movie #26 sjlouis

  • Senior Member
  • 1,573 posts

+3
Neutral

Posted 27 October 2017 - 18:47

I've done tests by flashing the last Pli 6 version and the last Pli 4 version. I have only change language, 1080 p, HDMI and assistant display and I have the same problem :( .

 

Is it possible to have a command (probably with the only physic button) to stop this type of problem without switching off electrucaly the stb?


Vu+ Ultimo 4K - OpenPli 8.3

Xtrend ET9200 - OpenPli 6.2


Re: Pli 6 hangs when I stop a movie #27 lupus44

  • Member
  • 24 posts

+1
Neutral

Posted 27 October 2017 - 21:00

When the spinner starts running there is not much left to do ... that's too late, unless it stops by itself ...


Edited by lupus44, 27 October 2017 - 21:00.


Re: Pli 6 hangs when I stop a movie #28 Eragon

  • Senior Member
  • 164 posts

+1
Neutral

Posted 27 October 2017 - 21:21

 

Is it possible to have a command (probably with the only physic button) to stop this type of problem without switching off electrucaly the stb?

 

If you can connect via telnet there are chances that you can send a command to reboot the box.



Re: Pli 6 hangs when I stop a movie #29 sjlouis

  • Senior Member
  • 1,573 posts

+3
Neutral

Posted 27 October 2017 - 21:42

Yes but I don't want to reboot the box because it's recording and the records are good as I explained previously.


Vu+ Ultimo 4K - OpenPli 8.3

Xtrend ET9200 - OpenPli 6.2


Re: Pli 6 hangs when I stop a movie #30 Eragon

  • Senior Member
  • 164 posts

+1
Neutral

Posted 27 October 2017 - 22:25

Besides the reboot command, the only other way I know that could help is stopping and restarting Enigma2, but I think that the recording too will be stopped.

But in this forum there are much more experts than me who could suggest other useful telnet commands.


Edited by Eragon, 27 October 2017 - 22:25.


Re: Pli 6 hangs when I stop a movie #31 Pike_Bishop

  • Senior Member
  • 1,140 posts

+74
Good

Posted 27 October 2017 - 22:48

 

Yes but I don't want to reboot the box because it's recording and the records are good as I explained previously.

there is no way i think.

 

@Eragon,

 

If you can connect via telnet there are chances that you can send a command to reboot the box.

 

Vu boxes have a emergency exit function so if the box hangs you can press and hold the power button on your remote control

till such time as the box reboot from alone.

this didn't work with the bluetooth remote control only with infrared remote control.

 

 

regards

Biki3


Receiver: VU Ultimo 4K, Octagon SF8008 4K, Gigablue Quad 4K

Image: OpenPLI-8.3


Re: Pli 6 hangs when I stop a movie #32 lupus44

  • Member
  • 24 posts

+1
Neutral

Posted 28 October 2017 - 06:17

Hi All of those remarks are very  interesting, but the problem still remain ... I don't remember anything like that

with my old VU Ultimo HD, perhaps it is a bug due to the STB 4K itself.


Edited by lupus44, 28 October 2017 - 06:19.


Re: Pli 6 hangs when I stop a movie #33 Pr2

  • PLi® Contributor
  • 6,182 posts

+261
Excellent

Posted 28 October 2017 - 08:56

Hi,
 
In telnet you can try:

init 4
Then wait that it stop, then to restart:

init 3
But if it doesn't stop you need to type:

killall enigma2
init 4
reboot now

NO SUPPORT by PM, it is a forum make your question public so everybody can benefit from the question/answer.
If you think that my answer helps you, you can press the up arrow in bottom right of the answer.

Wanna help with OpenPLi Translation? Please read our Wiki Information for translators

Sat: Hotbird 13.0E, Astra 19.2E, Eutelsat5A 5.0W
VU+ Solo 4K: 2*DVB-S2 + 2*DVB-C/T/T2 (used in DVB-C) & Duo 4K: 2*DVB-S2X + DVB-C (FBC)

AB-Com: PULSe 4K 1*DVB-S2X (+ DVB-C/T/T2)
Edision OS Mio 4K: 1*DVB-S2X + 1*DVB-C/T/T2
 


Re: Pli 6 hangs when I stop a movie #34 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 28 October 2017 - 09:29

Don't bother trying to debug this, it has nothing to do with enigma.

 

Do this:

 

- login to the receiver, do dmesg -c and ignore the output.

- trigger the issue

- do dmesg -c again

- you will see lots of output from the kernel, stack traces from a null pointer dereference and the words "OOPS" or "BUG".

 

I other words, driver naughtyness and they have been stopped by the Linux kernel. Only remedy is total reboot.

 

Whenever you see spinners and they don't go away, ALWAYS first check the output of dmesg.


Edited by Erik Slagter, 28 October 2017 - 09:29.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Pli 6 hangs when I stop a movie #35 sjlouis

  • Senior Member
  • 1,573 posts

+3
Neutral

Posted 28 October 2017 - 12:44

Ok, I've done other tests and I found something interesting. When in the recording parameters I choice "go to the last service" when I press "stop", Pli returns to the channel (NRJ Hits for example) and doesn't crash. If I choice "ask the user", all the options which allows to go to the film list crashes the box.

 

Then it seems there is a problem in Pli and when I read the error message, I see the same one than I can have with a python program :

 

unsupported operand type(s) for -: 'int' and 'NoneType'

 

int(x) returns a problem if x is not an integer. In this case, it's a NoneType object, it doesn't return a value.

 

 

The first time I tried to stop Enigma with pressing a long time on the power button, it doesn't do anything. With the response of Biki3, I tried again and in fact it works if I press a very long time, at least 15 seconds.

 

If I can connect to the box with Telnet, no command (init x, reboot...) restarts the box. One of them returns to the service but there in no picture, no sound, but I can see subtitles :blink: .

 

Erik, when do I type these commands ? Before the crash or after ?

 

 

Lupus, you can change the parameter if you want to avoid to crash the box. it's not very convenient but it's safer ;) .


Vu+ Ultimo 4K - OpenPli 8.3

Xtrend ET9200 - OpenPli 6.2


Re: Pli 6 hangs when I stop a movie #36 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 28 October 2017 - 12:51

See "before issue" and "after issue".


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Pli 6 hangs when I stop a movie #37 sjlouis

  • Senior Member
  • 1,573 posts

+3
Neutral

Posted 28 October 2017 - 12:53

Ok, I'm trying again :( ;) .

 

What means "trigger the issue" ? What I have to do?


Edited by sjlouis, 28 October 2017 - 12:54.

Vu+ Ultimo 4K - OpenPli 8.3

Xtrend ET9200 - OpenPli 6.2


Re: Pli 6 hangs when I stop a movie #38 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+542
Excellent

Posted 28 October 2017 - 12:59

That's what you are the expert at ;) "Trigger the issue" means: whatever you do that tends to give the problem.


* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: Pli 6 hangs when I stop a movie #39 sjlouis

  • Senior Member
  • 1,573 posts

+3
Neutral

Posted 28 October 2017 - 13:05

Ok, thank you.


Vu+ Ultimo 4K - OpenPli 8.3

Xtrend ET9200 - OpenPli 6.2


Re: Pli 6 hangs when I stop a movie #40 Eragon

  • Senior Member
  • 164 posts

+1
Neutral

Posted 28 October 2017 - 17:11


If I can connect to the box with Telnet, no command (init x, reboot...) restarts the box. One of them returns to the service but there in no picture, no sound, but I can see subtitles

 

Try:

shutdown -n -r now




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users